|
That is probably the next step. Good
idea. Thanks.
-d
----- Original Message -----
Sent: Saturday, June 03, 2006 7:29
PM
Subject: RE: [Declude.JunkMail] OT:
Automatic restart after power failure - Proliant 1850R
Might want to try
if you have not already to load/revert to all defaults for all settings, save
and restart, then go back in and make needed changes.
John
T
eServices For
You
"Seek, and ye shall
find!"
-----Original
Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Dave Doherty
Sent: Saturday, June 03,
2006 4:01
PM
To:
Declude.JunkMail@declude.com
Subject: Re: [Declude.JunkMail] OT:
Automatic restart after power failure - Proliant 1850R
I flashed the BIOS to
the latest revision this afternoon. It did not fix the problem. Keep those
ideas coming!
----- Original Message -----
Sent:
Saturday, June 03,
2006 6:38
PM
Subject: RE:
[Declude.JunkMail] OT: Automatic restart after power failure - Proliant
1850R
Are the BIOS
versions the same? Maybe it was fixed in a newer BIOS update. I remember
updating older servers of various brands and recall that the readme's for
BIOS' often talked about fixes to power management
support.
Best
Regards
Andy
Schmidt
Phone: +1 201
934-3414 x20 (Business)
Fax: +1 201
934-9206
-----Original
Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of John T
(Lists)
Sent:
Saturday, June 03,
2006 02:17 PM
To:
Declude.JunkMail@declude.com
Subject: RE: [Declude.JunkMail] OT:
Automatic restart after power failure - Proliant 1850R
While I can not
help you, I feel your pain. A client has 2 Proliant 350s and 2 Proliant
330s and one of the 350s refuses to start after power is restored even
though all BIOS settings are the same. Of course, this problem was found
after support ended and HP/Compaq has not been helpful on resolving
it.
John
T
eServices For
You
"Seek, and ye
shall find!"
-----Original
Message-----
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Dave Doherty
Sent: Saturday, June
03, 2006 9:39
AM
To:
Declude.JunkMail@declude.com
Subject: [Declude.JunkMail] OT:
Automatic restart after power failure - Proliant 1850R
OK, here's one for
those of you with long memories....
I have several
Proliant 1850Rs on line. They were all configured with Smart Start, and
all appear to have the same BIOS settings, including the advanced settings
accessible after hitting Ctrl-A. The board switches are set the same on
all machines.
All but one restart
automatically after a power failure. One does not, and I cannot find
anything relating to this behavior in the BIOS settings or online at
HP. A query to their support forum turned up another user with the
same issue, and no response from anyone to the question.
Does anybody here
remember how to set this?
|
