Nick Good catch, at the bottom of my diags.txt file I see 2 "INVALID KEY" entries.
My firewall does not allow domain names to be entered as source or destination addresses, only IP addresses. I had an old entry for 63.246.13.84 entered on march 06, doing an nslookup for keys.declude.com I now get 63.246.31.246. I've added the new address and allow incoming and outgoing traffic, but am not sure what to do next. Not sure if I should restart the decludeproc or what. John -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Nick Hayer Sent: Tuesday, July 18, 2006 5:59 AM To: [email protected] Subject: Re: [Declude.JunkMail] Speaking of Decludes AVG scanner Chris Asaro wrote: > Try opening the diags.txt file in your \mailserver\declude directory. Check > to see if you are receiving an invalid key code error. When I went to 4.20 I had no such error code however the evidently there was a one hence Declude ceased to function without warning. -Nick > --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type "unsubscribe Declude.JunkMail". The archives can be found at http://www.mail-archive.com. --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type "unsubscribe Declude.JunkMail". The archives can be found at http://www.mail-archive.com.
