Darn - I got burned. Some interims release in 2004 changed the END behavior - where it stopped carrying over the weight: http://www.mail-archive.com/declude.junkmail@declude.com/msg20850.html This behavior makes NO sense at all. But now that I've upgraded Imail and Declude there's no way going back. For now I'll have to work around it and change my filters. Yes, if the 'END' now behaves like a 'CANCEL', then we need a 'STOP' directive to restore the previous capability of using filters to simulate and/or conditions in a somewhat efficient manner. This is a huge gotcha!
Best Regards Andy Schmidt Phone: +1 201 934-3414 x20 (Business) Fax: +1 201 934-9206 _____ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Scott Fisher Sent: Friday, November 17, 2006 10:33 AM To: declude.junkmail@declude.com Subject: Re: [Declude.JunkMail] Filter 'END' statement in 4.3.14 flushes WEIGHT? Can we request a STOP function that woul dstop the filter and exit with the current weight? ----- Original Message ----- From: David <mailto:[EMAIL PROTECTED]> Barker To: declude.junkmail@declude.com Sent: Friday, November 17, 2006 9:05 AM Subject: RE: [Declude.JunkMail] Filter 'END' statement in 4.3.14 flushes WEIGHT? The END function means END the filter and do not add any of the points for that filter. If the END condition is met it is as if the filter never ran. David B www.declude.com _____ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Andy Schmidt Sent: Friday, November 17, 2006 10:00 AM To: declude.junkmail@declude.com Subject: [Declude.JunkMail] Filter 'END' statement in 4.3.14 flushes WEIGHT? Hi, Can anyone confirm that the 'END' statement is functioning properly. I've been noticing/suspecting that certain test combinations had much too little weights and I finally have time to debug that. This is the entry in the GLOBAL.CFG CONTENT filter D:\IMail\Declude\CONTENTfilter.txt x 0 0 Means - the filter itself has a weight of 0 - all weights would be assigned IN the filter Here CONTENTfilter.txt: SKIPIFWEIGHT 20 MAXWEIGHT 9 TESTSFAILED 7 CONTAINS SNIFFER TESTSFAILED 1 CONTAINS SNIFFER-SCAMS TESTSFAILED 1 CONTAINS SNIFFER-PORN TESTSFAILED 2 CONTAINS SNIFFER-MALWARE TESTSFAILED 1 CONTAINS SNIFFER-OBFUSC TESTSFAILED -2 CONTAINS SNIFFER-IP TESTSFAILED 4 CONTAINS INV-URIBL-WT1 TESTSFAILED 5 CONTAINS INV-URIBL-WT2 TESTSFAILED 6 CONTAINS INV-URIBL-WT3 TESTSFAILED 7 CONTAINS INV-URIBL-WT4 TESTSFAILED END CONTAINS SPAMCOP TESTSFAILED END CONTAINS NJABLSOURCES TESTSFAILED END CONTAINS AHBLSOURCES TESTSFAILED END CONTAINS AHBLPSSL TESTSFAILED END CONTAINS SORBS-SPAM TESTSFAILED END CONTAINS SENDERDB-BLOCK TESTSFAILED END CONTAINS SBL TESTSFAILED 2 CONTAINS SNIFFER-IP As far as I can tell, the Filter works fine as long as there is only SNIFFER and/or URIBL and will return the proper weights around 7 through 9. However, if it hits the END statement is appears as if it always returns ZERO. In other words, it loses the weight that had been accumulated up to that point. Best Regards Andy Schmidt Phone: +1 201 934-3414 x20 (Business) Fax: +1 201 934-9206 --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type "unsubscribe Declude.JunkMail". The archives can be found at http://www.mail-archive.com. --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type "unsubscribe Declude.JunkMail". The archives can be found at http://www.mail-archive.com. --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type "unsubscribe Declude.JunkMail". The archives can be found at http://www.mail-archive.com. --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type "unsubscribe Declude.JunkMail". The archives can be found at http://www.mail-archive.com.
