Hi... but, in http://svn.apache.org/repos/asf/incubator/derby/code/trunk/java/testing/org/apache/derbyTesting/functionTests/suites/derbynetclientmats.properties
it already shows:framework=DerbyNetClient derbynetmats is included in the suite derbynetclientmats (see derbynetclientmats.properties) - when running from within derbynetclientmats, the higher level's suite's property overwrites the lower level property & thus, the test will then run with framework=DerbyNetClient, i.e. test with derbyclient.jar. But derbynetmats is also separate suite in its own right, intended to test the jcc driver - db2jcc.jar, which is when the framework=DerbyNet. Both drivers need to be tested as they're both supported by/with derby. So, derbyall.properties includes both suites derbynetmats & derbynetclientmats. Myrna On 5/11/05, TomohitoNakayama <[EMAIL PROTECTED]> wrote: > Hello. > > In derbynetmats.properties, > http://svn.apache.org/repos/asf/incubator/derby/code/trunk/java/testing/org/apache/derbyTesting/functionTests/suites/derbynetmats.properties > cofiguration was as next ... > > framework=DerbyNet > > I think this should be , > framework=DerbyNetClient. > > This may be reason.... > > #And second reason is that I don't know much about common knoledge of test > suite ;P > #I feel that derbyall test suite does not suit for my task.... > > Thanks. > > Best regards. > > /* > > Tomohito Nakayama > [EMAIL PROTECTED] > [EMAIL PROTECTED] > > Naka > http://www5.ocn.ne.jp/~tomohito/TopPage.html > > */ > ----- Original Message ----- > From: "Myrna van Lunteren" <[EMAIL PROTECTED]> > To: "Derby Development" <derby-dev@db.apache.org> > Sent: Wednesday, May 11, 2005 2:04 AM > Subject: Re: "-Dframework=DerbyNetClient"? (Re: BulkInsert ? (Re: DERBY-167 > has done but ...)) > > Hi, > > Well, derbyall runs derbynetmats & derbynetclientmats. With > derbynetmats, the intent of the suite is to test derbynet, i.e. > networkserver via IBMs Universal JDBC driver ('db2jcc*.jar'). With > derbynetclientmats, the intent of the suite is to test the (new) > derbyclient - and thus, in that subsuite, -Dframework=DerbyNetClient. > > So, it's not the default, the default framework is none - which means, > using the embedded driver & not networkserver at all. The property > gets set by the harness because it's in the derbynetmats.properties > file. > > RunSuite derbyall should not be run with any framework properties > passed in...the individual suites will add the framework properties as > needed. > > As to why you got a hang...??? If you have the db2jcc*.jar in your > classpath, it should just run, if you don't it should just skip that > test. I've not seen that test hang recently...You should check what > the last thing is the test did - this you would see in the .tmp file. > Also, do other derbynetmats tests pass? Also, the derbynet.out and > derbynet.err (drill down into the derbynetmats dir untill you find > them) will have more info. > > Myrna > > On 5/10/05, TomohitoNakayama <[EMAIL PROTECTED]> wrote: > > Follows .... > > > > > Well .. I'm not sure default command option "-Dframework=DerbyNet" > > > generated by RunSuite .... > > > > This means that I wonder why default of the option is this value... > > > > Best regards. > > > > /* > > > > Tomohito Nakayama > > [EMAIL PROTECTED] > > [EMAIL PROTECTED] > > > > Naka > > http://www5.ocn.ne.jp/~tomohito/TopPage.html > > > > */ > > ----- Original Message ----- > > From: "TomohitoNakayama" <[EMAIL PROTECTED]> > > To: "Derby Development" <derby-dev@db.apache.org> > > Sent: Tuesday, May 10, 2005 10:45 PM > > Subject: "-Dframework=DerbyNetClient"? (Re: BulkInsert ? (Re: DERBY-167 > > has > > done but ...)) > > > > > Hello. > > > > > > I have tried alljava test suite , but failed in executing > > > DerbyNetAutoStart. > > > Many hours but the test does not finised. > > > > > > Executing command generated by RunSuite for that test was as next: > > > Execute command: > > > java -DjavaCmd=java -Dframework=DerbyNet -Dtimeout=60 -Djdk12te > > > st=true > > > -Doutputdir=C:\ProgramDev\derbyUser\derbyall.20050510\derbyall\derbynetm > > > ats\DerbyNet\derbynetmats > > > -Dtopsuitedir=C:\ProgramDev\derbyUser\derbyall.2005051 > > > 0\derbyall\derbynetmats\DerbyNet > > > -Dtopreportdir=C:\ProgramDev\derbyUser\derbyall > > > .20050510\derbyall\derbynetmats > > > -Drundir=C:\ProgramDev\derbyUser\derbyall.200505 > > > 10 > > > -DtestSpecialProps=derby.debug.true=enableBtreeConsistencyCheck^derby.stream. > > > error.logSeverityLevel=0^excludeJCC=at-or-after:3.0,when-at-or-before:jdk1.3.1^r > > > unwithj9=false -Dsuitename=derbynetmats:derbynetmats > > > -Dtopsuitename=derbyall > > > org > > > .apache.derbyTesting.functionTests.harness.RunTest > > > derbynet/DerbyNetAutoStart.ja > > > va > > > > > > Seeing next url , I found option of "-Dframework=DerbyNetClient" is > > > needed > > > for RunTest. > > > http://svn.apache.org/repos/asf/incubator/derby/code/trunk/java/testing/README.htm > > > > > > Adding above option to RunSuite also. > > > After that test seems to be done. > > > > > > Well .. I'm not sure default command option "-Dframework=DerbyNet" > > > generated by RunSuite .... > > > > > > Best regards. > > > > > > /* > > > > > > Tomohito Nakayama > > > [EMAIL PROTECTED] > > > [EMAIL PROTECTED] > > > > > > Naka > > > http://www5.ocn.ne.jp/~tomohito/TopPage.html > > > > > > */ > > > ----- Original Message ----- > > > From: "TomohitoNakayama" <[EMAIL PROTECTED]> > > > To: "Derby Development" <derby-dev@db.apache.org> > > > Sent: Tuesday, May 10, 2005 8:37 PM > > > Subject: Re: BulkInsert ? (Re: DERBY-167 has done but ...) > > > > > > > > >> Hello. > > >> > > >> I see. > > >> I understood bulk insert. > > >> Thank you. > > >> Now, I have just tryed derbyall-test problem and there seems to be > > >> trouble in derbynet/DerbyNetAutoStart.. > > >> > > >> I will report it in detail later. > > >> > > >> Best regards. > > >> /* > > >> > > >> Tomohito Nakayama > > >> [EMAIL PROTECTED] > > >> [EMAIL PROTECTED] > > >> > > >> Naka > > >> http://www5.ocn.ne.jp/~tomohito/TopPage.html > > >> > > >> */ > > >> ----- Original Message ----- > > >> From: "Kathey Marsden" <[EMAIL PROTECTED]> > > >> To: "Derby Development" <derby-dev@db.apache.org> > > >> Sent: Tuesday, May 10, 2005 5:02 AM > > >> Subject: Re: BulkInsert ? (Re: DERBY-167 has done but ...) > > >> > > >> > > >>> Satheesh Bandaram wrote: > > >>> > > >>>> BulkInsert is an internal mechanism, that gets used when you import > > >>>> data into a table, using Derby's import mechanism. > > >>>> (SYSCS_UTIL.SYSCS_IMPORT_TABLE > > >>>> <http://incubator.apache.org/derby/docs/ref/>) This is not directly > > >>>> exposed to applications using JDBC or SQL, so there is no way to > > >>>> directly invoke it. If you write some test cases for your feature > > >>>> using this procedure, you are testing bulkInsert code. Are you > > >>>> familiar with importing/exporting tables? Looking at Derby manuals > > >>>> for > > >>>> information would be very useful. > > >>> > > >>> I think you could add a test to tools/ieptests.sql > > >>> which tests loading a table with an identity column. > > >>> > > >>> Kathey > > >>> > > >>> > > >>> > > >>> > > >>> > > >>> -- > > >>> No virus found in this incoming message. > > >>> Checked by AVG Anti-Virus. > > >>> Version: 7.0.308 / Virus Database: 266.11.6 - Release Date: 2005/05/06 > > >>> > > >> > > >> > > >> -- > > >> No virus found in this outgoing message. > > >> Checked by AVG Anti-Virus. > > >> Version: 7.0.308 / Virus Database: 266.11.7 - Release Date: 2005/05/09 > > >> > > >> > > >> > > >> > > >> -- > > >> No virus found in this incoming message. > > >> Checked by AVG Anti-Virus. > > >> Version: 7.0.308 / Virus Database: 266.11.7 - Release Date: 2005/05/09 > > >> > > >> > > > > > > > > > > > > -- > > > No virus found in this outgoing message. > > > Checked by AVG Anti-Virus. > > > Version: 7.0.308 / Virus Database: 266.11.7 - Release Date: 2005/05/09 > > > > > > > > > > > > > > > -- > > > No virus found in this incoming message. > > > Checked by AVG Anti-Virus. > > > Version: 7.0.308 / Virus Database: 266.11.7 - Release Date: 2005/05/09 > > > > > > > -- > > No virus found in this outgoing message. > > Checked by AVG Anti-Virus. > > Version: 7.0.308 / Virus Database: 266.11.7 - Release Date: 2005/05/09 > > > > > > -- > No virus found in this incoming message. > Checked by AVG Anti-Virus. > Version: 7.0.308 / Virus Database: 266.11.7 - Release Date: 2005/05/09 > > -- > No virus found in this outgoing message. > Checked by AVG Anti-Virus. > Version: 7.0.308 / Virus Database: 266.11.8 - Release Date: 2005/05/10 > >