> Don't know why I catched the "wrong" constraints" via installing with breeze - might be constraints are not considered when installed a specific airflow version and then providers are upgraded?
It could be that later when you upgraded some providers, this also get bumped or maybe some uv sync in the image happened. When I used `--use-airflow-version 3.1.1` and **then** installed just `apache-airflow-providers-edge3==1.4.1rc2` in breeze - everything worked fine. It also can be you have some customisation scripts in breeze that do some upgrades afterwards and you have not noticed. On Tue, Nov 4, 2025 at 3:34 PM Jarek Potiuk <[email protected]> wrote: > It's actually already fixed in main and cherry-picked to 3.1.2 - > so in > 3.1.2 it's OK to have structlog 25.5.0. See > https://github.com/apache/airflow/pull/57335 and it's been cherry-picked > and merged as part of https://github.com/apache/airflow/pull/57640 > > J, > > > On Tue, Nov 4, 2025 at 3:04 PM Scheffler Jens (XC-AS/EAE-ADA-T) via dev < > [email protected]> wrote: > >> Hi Amough, >> >> you are right but constraints in Airflow 3.1.2rc[1|2] both pin >> structlog==25.5.0 >> see >> https://raw.githubusercontent.com/apache/airflow/constraints-3.1.2rc2/constraints-3.10.txt >> >> So wanted to raise this if not detected that we need to fix constraints >> before releasing 3.1.2 as well. >> Don't know why I catched the "wrong" constraints" via installing with >> breeze - might be constraints are not considered when installed a specific >> airflow version and then providers are upgraded? >> >> Jens >> >> -----Original Message----- >> From: Amogh Desai <[email protected]> >> Sent: Dienstag, 4. November 2025 10:07 >> To: [email protected] >> Subject: Re: [VOTE] Airflow Providers prepared on November 03, 2025 >> >> Jens, we have constrained structlog to disallow 25.5.0: >> >> https://raw.githubusercontent.com/apache/airflow/constraints-3.1.0/constraints-3.10.txt >> >> So, that should not be a problem for you :), maybe it was installed in >> your environment. >> >> Thanks & Regards, >> Amogh Desai >> >> >> On Tue, Nov 4, 2025 at 3:59 AM Jens Scheffler <[email protected]> >> wrote: >> >> > +1 (binding) - Checked SVN, Check in Docker, Reproducible package >> > +build, >> > Licenses, Signatures >> > >> > Installed the edge provider with current common-compat in Airflow >> > 2.11.0, 3.0.6, 3.1.2rc1 and main and tested with EdgeExecutor and >> > Integration Test Dag, all loking good. >> > >> > Will test detailled issue resolution (subpath etc) tomorrow but until >> > now all good to release. Best release we had for Edge3 ever :-D >> > >> > Note: Was not able to install providers with Airflow 3.1.1 as >> > structlog==25.5.0 installed by breeze has some incompatability and >> > breze start failed with - assume this is not blocking providers >> > release - assume this is because constraints are installed from main >> > and not 3.1.1 in breeze: >> > >> > Traceback (most recent call last): >> > File "/usr/python/bin/airflow", line 4, in <module> >> > from airflow.__main__ import main >> > File >> > "/usr/python/lib/python3.12/site-packages/airflow/__init__.py", >> > line 79, in <module> >> > settings.initialize() >> > File >> > "/usr/python/lib/python3.12/site-packages/airflow/settings.py", >> > line 698, in initialize >> > LOGGING_CLASS_PATH = configure_logging() >> > ^^^^^^^^^^^^^^^^^^^ >> > File >> > "/usr/python/lib/python3.12/site-packages/airflow/logging_config.py", >> > line 88, in configure_logging >> > from airflow._shared.logging import configure_logging, >> > init_log_folder, translate_config_values >> > File >> > "/usr/python/lib/python3.12/site-packages/airflow/_shared/logging/__in >> > it__.py", >> > >> > line 27, in <module> >> > from .structlog import configure_logging, init_log_file, >> > init_log_folder >> > File >> > "/usr/python/lib/python3.12/site-packages/airflow/_shared/logging/stru >> > ctlog.py", >> > >> > line 38, in <module> >> > from .percent_formatter import PercentFormatRender >> > File >> > "/usr/python/lib/python3.12/site-packages/airflow/_shared/logging/perc >> > ent_formatter.py", >> > >> > line 29, in <module> >> > from structlog.dev import ConsoleRenderer, Styles >> > ImportError: cannot import name 'Styles' from 'structlog.dev' >> > (/usr/python/lib/python3.12/site-packages/structlog/dev.py) >> > >> > Error: check_environment returned 1. Exiting. >> > >> > Call that I used for testing: breeze start-airflow --python 3.12 >> > --load-example-dags --backend postgres --executor EdgeExecutor >> > --answer y --use-airflow-version 3.1.1 --use-distributions-from-dist >> > >> > Tested also with Airflow 3.1.0 and saw as intended that edge3 provider >> > 1.4.1rc2 can not installed with Airflow 3.1.0 as UI plugin incompatible. >> > >> > Using Python 3.12.12 environment at: /usr/python >> > × No solution found when resolving dependencies: >> > ╰─▶ Because only apache-airflow-providers-edge3==1.4.1 is available >> > and apache-airflow-providers-edge3==1.4.1 depends on one of: >> > apache-airflow>=2.10.0,<3.1.0 >> > apache-airflow>3.1.0 >> > we can conclude that all versions of >> > apache-airflow-providers-edge3 depend on one of: >> > apache-airflow>=2.10.0,<3.1.0 >> > apache-airflow>3.1.0 >> > >> > And because you require apache-airflow==3.1.0 and >> > apache-airflow-providers-edge3, we can conclude that your requirements >> > are unsatisfiable. >> > >> > On 11/3/25 13:06, Elad Kalif wrote: >> > > Hey all, >> > > >> > > I have just cut the ad-hoc wave Airflow Providers packages. This >> > > email is calling a vote on the release, which will last for 72 hours >> > > - which means that it will end on November 06, 2025 12:05 PM UTC and >> > > until 3 binding +1 votes have been received. >> > > >> > > Consider this my (binding) +1. >> > > >> > > Airflow Providers are available at: >> > > https://di/ >> > > st.apache.org%2Frepos%2Fdist%2Fdev%2Fairflow%2Fproviders%2F&data=05% >> > > 7C02%7CJens.Scheffler%40de.bosch.com%7Cf6343926cc624857a11208de1b819 >> > > e4d%7C0ae51e1907c84e4bbb6d648ee58410f4%7C0%7C0%7C638978440681481189% >> > > 7CUnknown%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIs >> > > IlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata= >> > > u%2BGuEPt6aFORkaSjATUG2TVoDJiUJmNDiTM9Txe4cQc%3D&reserved=0 >> > > >> > > *apache-airflow-providers-<PROVIDER>-*.tar.gz* are the binary >> > > Python "sdist" release - they are also official "sources" for the >> > Provider >> > > distributions. >> > > >> > > *apache_airflow_providers_<PROVIDER>-*.whl are the binary >> > > Python "wheel" release. >> > > >> > > The test procedure for PMC members is described in >> > > >> > https://gith/ >> > ub.com%2Fapache%2Fairflow%2Fblob%2Fmain%2Fdev%2FREADME_RELEASE_PROVIDE >> > RS.md%23verify-the-release-candidate-by-pmc-members&data=05%7C02%7CJen >> > s.Scheffler%40de.bosch.com%7Cf6343926cc624857a11208de1b819e4d%7C0ae51e >> > 1907c84e4bbb6d648ee58410f4%7C0%7C0%7C638978440681516854%7CUnknown%7CTW >> > FpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIs >> > IkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=6sgJ88Z0t%2F1Qnhxr >> > wPTnej7SfgLNf6hI7qYxnJBl6RU%3D&reserved=0 >> > > >> > > The test procedure for and Contributors who would like to test this >> > > RC is described in: >> > > >> > https://gith/ >> > ub.com%2Fapache%2Fairflow%2Fblob%2Fmain%2Fdev%2FREADME_RELEASE_PROVIDE >> > RS.md%23verify-the-release-candidate-by-contributors&data=05%7C02%7CJe >> > ns.Scheffler%40de.bosch.com%7Cf6343926cc624857a11208de1b819e4d%7C0ae51 >> > e1907c84e4bbb6d648ee58410f4%7C0%7C0%7C638978440681546634%7CUnknown%7CT >> > WFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiI >> > sIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=j%2B4anx9P7T5uTdc >> > omIOr%2BOr2%2FoDHQnntn1Pvhn33BHs%3D&reserved=0 >> > > >> > > >> > > Public keys are available at: >> > > https://di/ >> > > st.apache.org%2Frepos%2Fdist%2Frelease%2Fairflow%2FKEYS&data=05%7C02 >> > > %7CJens.Scheffler%40de.bosch.com%7Cf6343926cc624857a11208de1b819e4d% >> > > 7C0ae51e1907c84e4bbb6d648ee58410f4%7C0%7C0%7C638978440681574562%7CUn >> > > known%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAi >> > > OiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=enB4 >> > > BNSldvybyXLUzIJIz5jE2tCnZ904nXCrgzoZp%2Bg%3D&reserved=0 >> > > >> > > Please vote accordingly: >> > > >> > > [ ] +1 approve >> > > [ ] +0 no opinion >> > > [ ] -1 disapprove with the reason >> > > >> > > Only votes from PMC members are binding, but members of the >> > > community are encouraged to test the release and vote with >> "(non-binding)". >> > > >> > > Please note that the version number excludes the 'rcX' string. >> > > This will allow us to rename the artifact without modifying the >> > > artifact checksums when we actually release. >> > > >> > > The status of testing the providers by the community is kept here: >> > > https://gi/ >> > > thub.com%2Fapache%2Fairflow%2Fissues%2F57739&data=05%7C02%7CJens.Sch >> > > effler%40de.bosch.com%7Cf6343926cc624857a11208de1b819e4d%7C0ae51e190 >> > > 7c84e4bbb6d648ee58410f4%7C0%7C0%7C638978440681602068%7CUnknown%7CTWF >> > > pbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiI >> > > sIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=PPDrnZgPIfBJWRp >> > > 5VyEq1Ij2NGJXs9qK3b9mJA7Cwjk%3D&reserved=0 >> > > >> > > The issue is also the easiest way to see important PRs included in >> > > the RC candidates. >> > > Detailed changelog for the providers will be published in the >> > documentation >> > > after the >> > > RC candidates are released. >> > > >> > > You can find the RC packages in PyPI following these links: >> > > >> > > https://py/ >> > > pi.org%2Fproject%2Fapache-airflow-providers-edge3%2F1.4.1rc2%2F&data >> > > =05%7C02%7CJens.Scheffler%40de.bosch.com%7Cf6343926cc624857a11208de1 >> > > b819e4d%7C0ae51e1907c84e4bbb6d648ee58410f4%7C0%7C0%7C638978440681628 >> > > 771%7CUnknown%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAw >> > > MCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sd >> > > ata=HWxblv2u1%2B6Pr3QrB5N1s9k7wnOcgLZNi7qsgW3t9i0%3D&reserved=0 >> > > >> > > Cheers, >> > > Elad Kalif >> > > >> > >> > --------------------------------------------------------------------- >> > To unsubscribe, e-mail: [email protected] >> > For additional commands, e-mail: [email protected] >> > >> > >> >> --------------------------------------------------------------------- >> To unsubscribe, e-mail: [email protected] >> For additional commands, e-mail: [email protected] >> >
