Thank you Hugo! --Sheng
On Wed, Apr 24, 2013 at 12:16 PM, Hugo Trippaers < htrippa...@schubergphilis.com> wrote: > Hey Sheng, > > Sure thing, I'm trying to help Angeline already, but it's quite a > complex setup. > > I'll try to write down some detailed instructions. > > Cheers, > > Hugo > > Sent from my iPhone > > On 24 apr. 2013, at 19:56, "Sheng Yang" <sh...@yasker.org> wrote: > > Hi Hugo, > > Could you help with KVM OVS setup? I cannot find much information on the > our wiki about OVS on KVM. > > --Sheng > > On Fri, Apr 19, 2013 at 8:14 PM, Angeline Shen > <angeline.s...@citrix.com>wrote: > >> ASF 4.1 cloudstack with openvswitch support for RHEL 6.3 KVM test >> configuration setup: >> >> After completing >> http://nullworks.wordpress.com/2012/09/19/kvm-and-openvswitch-on-centos-6-3-minimal/ >> to setup RHEL 6.3 openvswitch, encountered following problems: >> >> 1. In this scenario, after service openvswitch start, host is still up >> running but completely lost connection to network. >> >> [root@Rack3Host16 /]# service openvswitch start >> Inserting brcompat module [ OK ] >> Starting ovsdb-server [ OK ] >> Configuring Open vSwitch system IDs [ OK ] >> Starting ovs-vswitchd [ OK ] >> Starting ovs-brcompatd [ OK ] >> iptables already has a rule for gre, not explicitly enabling. >> [root@Rack3Host16 /]# >> >> >> 2. content of various files: >> >> /etc/sysconfig/network-scripts/ifcfg-ovsbr1 : >> DEVICE=ovsbr1 >> ONBOOT=yes >> DEVICETYPE=ovs >> TYPE=OVSBridge >> BOOTPROTO=static >> IPADDR=10.223.58.195 >> GATEWAY=10.223.58.193 >> NETMASK=255.255.255.0 >> HOTPLUG=no >> >> >> QUESTION: Is >> http://nullworks.wordpress.com/2012/09/19/kvm-and-openvswitch-on-centos-6-3-minimal/ >> Valid configuration instructions for openvswitch RHEL 6.3 >> or are there other updated correct configuration steps? >> >> Thanks >> >> >