To be on the record:
+0
I have an issue but cannot lay the blame with cloudstack. I will keep
looking and as I saw lots of reasons to go through with this version
reported by others.
On Thu, Dec 3, 2015 at 3:31 PM, Remi Bergsma <rberg...@schubergphilis.com>
wrote:
> Hi all,
>
> FYI run some integration tests against 4.6.1 and they all pass.
>
> Talked to Daan and I cannot reproduce his UI issue.
>
> Test results:
>
> ```
> nosetests --with-marvin --marvin-config=${marvinCfg} -s -a
> tags=advanced,required_hardware=true \
> component/test_vpc_redundant.py \
> component/test_routers_iptables_default_policy.py \
> component/test_routers_network_ops.py \
> component/test_vpc_router_nics.py \
> smoke/test_loadbalance.py \
> smoke/test_internal_lb.py \
> smoke/test_ssvm.py \
> smoke/test_network.py
>
> ```
>
> Result:
>
> ```
> Create a redundant VPC with two networks with two VMs in each network ...
> === TestName: test_01_create_redundant_VPC_2tiers_4VMs_4IPs_4PF_ACL |
> Status : SUCCESS ===
> ok
> Create a redundant VPC with two networks with two VMs in each network and
> check default routes ... === TestName: test_02_redundant_VPC_default_routes
> | Status : SUCCESS ===
> ok
> Create a redundant VPC with two networks with two VMs in each network ...
> === TestName:
> test_03_create_redundant_VPC_1tier_2VMs_2IPs_2PF_ACL_reboot_routers |
> Status : SUCCESS ===
> ok
> Test iptables default INPUT/FORWARD policy on RouterVM ... === TestName:
> test_02_routervm_iptables_policies | Status : SUCCESS ===
> ok
> Test iptables default INPUT/FORWARD policies on VPC router ... ===
> TestName: test_01_single_VPC_iptables_policies | Status : SUCCESS ===
> ok
> Test redundant router internals ... === TestName:
> test_01_isolate_network_FW_PF_default_routes_egress_true | Status : SUCCESS
> ===
> ok
> Test redundant router internals ... === TestName:
> test_02_isolate_network_FW_PF_default_routes_egress_false | Status :
> SUCCESS ===
> ok
> Test redundant router internals ... === TestName:
> test_01_RVR_Network_FW_PF_SSH_default_routes_egress_true | Status : SUCCESS
> ===
> ok
> Test redundant router internals ... === TestName:
> test_02_RVR_Network_FW_PF_SSH_default_routes_egress_false | Status :
> SUCCESS ===
> ok
> Create a VPC with two networks with one VM in each network and test nics
> after destroy ... === TestName: test_01_VPC_nics_after_destroy | Status :
> SUCCESS ===
> ok
> Create a VPC with two networks with one VM in each network and test
> default routes ... === TestName: test_02_VPC_default_routes | Status :
> SUCCESS ===
> ok
> Check the password file in the Router VM ... === TestName:
> test_isolate_network_password_server | Status : SUCCESS ===
> ok
> Check that the /etc/dhcphosts.txt doesn't contain duplicate IPs ... ===
> TestName: test_router_dhcphosts | Status : SUCCESS ===
> ok
> Test to create Load balancing rule with source NAT ... === TestName:
> test_01_create_lb_rule_src_nat | Status : SUCCESS ===
> ok
> Test to create Load balancing rule with non source NAT ... === TestName:
> test_02_create_lb_rule_non_nat | Status : SUCCESS ===
> ok
> Test for assign & removing load balancing rule ... === TestName:
> test_assign_and_removal_lb | Status : SUCCESS ===
> ok
> Test to verify access to loadbalancer haproxy admin stats page ... ===
> TestName: test02_internallb_haproxy_stats_on_all_interfaces | Status :
> SUCCESS ===
> ok
> Test create, assign, remove of an Internal LB with roundrobin http traffic
> to 3 vm's ... === TestName:
> test_01_internallb_roundrobin_1VPC_3VM_HTTP_port80 | Status : SUCCESS ===
> ok
> Test SSVM Internals ... === TestName: test_03_ssvm_internals | Status :
> SUCCESS ===
> ok
> Test CPVM Internals ... === TestName: test_04_cpvm_internals | Status :
> SUCCESS ===
> ok
> Test stop SSVM ... === TestName: test_05_stop_ssvm | Status : SUCCESS ===
> ok
> Test stop CPVM ... === TestName: test_06_stop_cpvm | Status : SUCCESS ===
> ok
> Test reboot SSVM ... === TestName: test_07_reboot_ssvm | Status : SUCCESS
> ===
> ok
> Test reboot CPVM ... === TestName: test_08_reboot_cpvm | Status : SUCCESS
> ===
> ok
> Test destroy SSVM ... === TestName: test_09_destroy_ssvm | Status :
> SUCCESS ===
> ok
> Test destroy CPVM ... === TestName: test_10_destroy_cpvm | Status :
> SUCCESS ===
> ok
> Test Remote Access VPN in VPC ... === TestName: test_vpc_remote_access_vpn
> | Status : SUCCESS ===
> ok
> Test VPN in VPC ... === TestName: test_vpc_site2site_vpn | Status :
> SUCCESS ===
> ok
> Test for port forwarding on source NAT ... === TestName:
> test_01_port_fwd_on_src_nat | Status : SUCCESS ===
> ok
> Test for port forwarding on non source NAT ... === TestName:
> test_02_port_fwd_on_non_src_nat | Status : SUCCESS ===
> ok
> Test for reboot router ... === TestName: test_reboot_router | Status :
> SUCCESS ===
> ok
> Test for Router rules for network rules on acquired public IP ... ===
> TestName: test_network_rules_acquired_public_ip_1_static_nat_rule | Status
> : SUCCESS ===
> ok
> Test for Router rules for network rules on acquired public IP ... ===
> TestName: test_network_rules_acquired_public_ip_2_nat_rule | Status :
> SUCCESS ===
> ok
> Test for Router rules for network rules on acquired public IP ... ===
> TestName: test_network_rules_acquired_public_ip_3_Load_Balancer_Rule |
> Status : SUCCESS ===
> ok
>
> ----------------------------------------------------------------------
> Ran 34 tests in 16542.754s
>
> OK
> ```
>
>
> And:
>
> ```
> nosetests --with-marvin --marvin-config=${marvinCfg} -s -a
> tags=advanced,required_hardware=false \
> smoke/test_routers.py \
> smoke/test_network_acl.py \
> smoke/test_privategw_acl.py \
> smoke/test_reset_vm_on_reboot.py \
> smoke/test_vm_life_cycle.py \
> smoke/test_vpc_vpn.py \
> smoke/test_service_offerings.py \
> component/test_vpc_offerings.py \
> component/test_vpc_routers.py
> ```
>
> Result:
>
> ```
> Test router internal advanced zone ... === TestName:
> test_02_router_internal_adv | Status : SUCCESS ===
> ok
> Test restart network ... === TestName: test_03_restart_network_cleanup |
> Status : SUCCESS ===
> ok
> Test router basic setup ... === TestName: test_05_router_basic | Status :
> SUCCESS ===
> ok
> Test router advanced setup ... === TestName: test_06_router_advanced |
> Status : SUCCESS ===
> ok
> Test stop router ... === TestName: test_07_stop_router | Status : SUCCESS
> ===
> ok
> Test start router ... === TestName: test_08_start_router | Status :
> SUCCESS ===
> ok
> Test reboot router ... === TestName: test_09_reboot_router | Status :
> SUCCESS ===
> ok
> test_privategw_acl (integration.smoke.test_privategw_acl.TestPrivateGwACL)
> ... === TestName: test_privategw_acl | Status : SUCCESS ===
> ok
> Test reset virtual machine on reboot ... === TestName:
> test_01_reset_vm_on_reboot | Status : SUCCESS ===
> ok
> Test advanced zone virtual router ... === TestName:
> test_advZoneVirtualRouter | Status : SUCCESS ===
> ok
> Test Deploy Virtual Machine ... === TestName: test_deploy_vm | Status :
> SUCCESS ===
> ok
> Test Multiple Deploy Virtual Machine ... === TestName:
> test_deploy_vm_multiple | Status : SUCCESS ===
> ok
> Test Stop Virtual Machine ... === TestName: test_01_stop_vm | Status :
> SUCCESS ===
> ok
> Test Start Virtual Machine ... === TestName: test_02_start_vm | Status :
> SUCCESS ===
> ok
> Test Reboot Virtual Machine ... === TestName: test_03_reboot_vm | Status :
> SUCCESS ===
> ok
> Test destroy Virtual Machine ... === TestName: test_06_destroy_vm | Status
> : SUCCESS ===
> ok
> Test recover Virtual Machine ... === TestName: test_07_restore_vm | Status
> : SUCCESS ===
> ok
> Test migrate VM ... === TestName: test_08_migrate_vm | Status : SUCCESS ===
> ok
> Test destroy(expunge) Virtual Machine ... === TestName: test_09_expunge_vm
> | Status : SUCCESS ===
> ok
> Test to create service offering ... === TestName:
> test_01_create_service_offering | Status : SUCCESS ===
> ok
> Test to update existing service offering ... === TestName:
> test_02_edit_service_offering | Status : SUCCESS ===
> ok
> Test to delete service offering ... === TestName:
> test_03_delete_service_offering | Status : SUCCESS ===
> ok
> Test for delete account ... === TestName: test_delete_account | Status :
> SUCCESS ===
> ok
> Test for Associate/Disassociate public IP address for admin account ...
> === TestName: test_public_ip_admin_account | Status : SUCCESS ===
> ok
> Test for Associate/Disassociate public IP address for user account ... ===
> TestName: test_public_ip_user_account | Status : SUCCESS ===
> ok
> Test for release public IP address ... === TestName: test_releaseIP |
> Status : SUCCESS ===
> ok
> Test create VPC offering ... === TestName: test_01_create_vpc_offering |
> Status : SUCCESS ===
> ok
> Test VPC offering without load balancing service ... === TestName:
> test_03_vpc_off_without_lb | Status : SUCCESS ===
> ok
> Test VPC offering without static NAT service ... === TestName:
> test_04_vpc_off_without_static_nat | Status : SUCCESS ===
> ok
> Test VPC offering without port forwarding service ... === TestName:
> test_05_vpc_off_without_pf | Status : SUCCESS ===
> ok
> Test VPC offering with invalid services ... === TestName:
> test_06_vpc_off_invalid_services | Status : SUCCESS ===
> ok
> Test update VPC offering ... === TestName: test_07_update_vpc_off | Status
> : SUCCESS ===
> ok
> Test list VPC offering ... === TestName: test_08_list_vpc_off | Status :
> SUCCESS ===
> test_09_create_redundant_vpc_offering
> (integration.component.test_vpc_offerings.TestVPCOffering) ... ===
> TestName: test_09_create_redundant_vpc_offering | Status : SUCCESS ===
> ok
> Test start/stop of router after addition of one guest network ... ===
> TestName: test_01_start_stop_router_after_addition_of_one_guest_network |
> Status : SUCCESS ===
> ok
> Test reboot of router after addition of one guest network ... ===
> TestName: test_02_reboot_router_after_addition_of_one_guest_network |
> Status : SUCCESS ===
> ok
> Test to change service offering of router after addition of one guest
> network ... === TestName:
> test_04_chg_srv_off_router_after_addition_of_one_guest_network | Status :
> SUCCESS ===
> ok
> Test destroy of router after addition of one guest network ... ===
> TestName: test_05_destroy_router_after_addition_of_one_guest_network |
> Status : SUCCESS ===
> ok
> Test to stop and start router after creation of VPC ... === TestName:
> test_01_stop_start_router_after_creating_vpc | Status : SUCCESS ===
> ok
> Test to reboot the router after creating a VPC ... === TestName:
> test_02_reboot_router_after_creating_vpc | Status : SUCCESS ===
> ok
> Tests to change service offering of the Router after ... === TestName:
> test_04_change_service_offerring_vpc | Status : SUCCESS ===
> ok
> Test to destroy the router after creating a VPC ... === TestName:
> test_05_destroy_router_after_creating_vpc | Status : SUCCESS ===
> ok
>
> ----------------------------------------------------------------------
> Ran 42 tests in 8418.430s
>
> OK
> ```
>
>
> Regards,
> Remi
>
>
>
>
>
> On 03/12/15 08:53, "Daan Hoogland" <daan.hoogl...@gmail.com> wrote:
>
> >Ok, thanks guys, I'll keep looking at my installation.
> >
> >It is a 4.6.0 upgraded to 4.6.1 for those who asked.
> >
> >On Thu, Dec 3, 2015 at 8:23 AM, Paul Angus <paul.an...@shapeblue.com>
> wrote:
> >
> >> @Daan, the zone dropdown is populated for me.
> >> @Glenn, can you confirm whether is ok for you pls.
> >>
> >> Regards,
> >> Paul Angus
> >> VP Technology/Cloud Architect
> >> ShapeBlue Ltd
> >> S: +44 20 3603 0540 | M: +447711418784 | T: @CloudyAngus
> >> paul.an...@shapeblue.com | www.shapeblue.com | Twitter:@shapeblue
> >> ShapeBlue Ltd, 53 Chandos Place, Covent Garden, London, WC2N 4HS
> >>
> >>
> >>
> >>
> >>
> >> [image: ShapeBlue] <http://www.shapeblue.com> Paul Angus VP Technology
> ,
> >> ShapeBlue d: *+44 2036170528* <+44%202036170528> | t:
> *@cloudyangus*
> >> <@cloudyangus> | m: *+44 7711418784* <+44%207711418784> e:
> >> *paul.an...@shapeblue.com* <paul.an...@shapeblue.com> | w:
> >> *www.shapeblue.com* <http://www.shapeblue.com>
> >> 53 Chandos Place, Covent Garden, London WC2N 4HS UK Shape Blue Ltd is a
> >> company incorporated in England & Wales. ShapeBlue Services India LLP
> is a
> >> company incorporated in India and is operated under license from Shape
> Blue
> >> Ltd. Shape Blue Brasil Consultoria Ltda is a company incorporated in
> Brasil
> >> and is operated under license from Shape Blue Ltd. ShapeBlue SA Pty Ltd
> is
> >> a company registered by The Republic of South Africa and is traded under
> >> license from Shape Blue Ltd. ShapeBlue is a registered trademark.
> >> This email and any attachments to it may be confidential and are
> intended
> >> solely for the use of the individual to whom it is addressed. Any views
> or
> >> opinions expressed are solely those of the author and do not necessarily
> >> represent those of Shape Blue Ltd or related companies. If you are not
> the
> >> intended recipient of this email, you must neither take any action based
> >> upon its contents, nor copy or show it to anyone. Please contact the
> sender
> >> if you believe you have received this email in error.
> >>
> >>
> >> -----Original Message-----
> >> From: Daan Hoogland [mailto:daan.hoogl...@gmail.com]
> >> Sent: Wednesday, December 2, 2015 5:13 PM
> >> To: dev <dev@cloudstack.apache.org>
> >> Subject: Re: [VOTE] Apache CloudStack 4.6.1
> >>
> >> I am having a problem, When trying to add a vpc from the UI the zone
> >> dropdown is empty. when trying to add an isolated network the dropdown
> does
> >> contain the wanted choice. Any body else seeing this?
> >>
> >>
> >> On Mon, Nov 30, 2015 at 11:12 PM, Remi Bergsma <
> >> rberg...@schubergphilis.com>
> >> wrote:
> >>
> >> > Hi all,
> >> >
> >> > I've created a 4.6.1 release candidate, with the following artifacts
> >> > up for a vote:
> >> >
> >> > Git Branch and Commit SH:
> >> >
> >> >
> https://git-wip-us.apache.org/repos/asf?p=cloudstack.git;a=shortlog;h=
> >> > 4.6.1-RC20151130T2258
> >> >
> >> > Commit: beb840fc1cdfa5ba3c76ce4071cf5c4b775362cd
> >> >
> >> > Source release (checksums and signatures are available at the same
> >> > location):
> >> > https://dist.apache.org/repos/dist/dev/cloudstack/4.6.1/
> >> >
> >> > PGP release keys (signed using A47DDC4F):
> >> > https://dist.apache.org/repos/dist/release/cloudstack/KEYS
> >> >
> >> > Vote will be open for 72 hours.
> >> >
> >> > For sanity in tallying the vote, can PMC members please be sure to
> >> > indicate "(binding)" with their vote?
> >> >
> >> > [ ] +1 approve
> >> > [ ] +0 no opinion
> >> > [ ] -1 disapprove (and reason why)
> >> >
> >> >
> >>
> >>
> >> --
> >> Daan
> >> Find out more about ShapeBlue and our range of CloudStack related
> services
> >>
> >> IaaS Cloud Design & Build
> >> <http://shapeblue.com/iaas-cloud-design-and-build//>
> >> CSForge – rapid IaaS deployment framework <
> http://shapeblue.com/csforge/>
> >> CloudStack Consulting <http://shapeblue.com/cloudstack-consultancy/>
> >> CloudStack Software Engineering
> >> <http://shapeblue.com/cloudstack-software-engineering/>
> >> CloudStack Infrastructure Support
> >> <http://shapeblue.com/cloudstack-infrastructure-support/>
> >> CloudStack Bootcamp Training Courses
> >> <http://shapeblue.com/cloudstack-training/>
> >>
> >> This email and any attachments to it may be confidential and are
> intended
> >> solely for the use of the individual to whom it is addressed. Any views
> or
> >> opinions expressed are solely those of the author and do not necessarily
> >> represent those of Shape Blue Ltd or related companies. If you are not
> the
> >> intended recipient of this email, you must neither take any action based
> >> upon its contents, nor copy or show it to anyone. Please contact the
> sender
> >> if you believe you have received this email in error. Shape Blue Ltd is
> a
> >> company incorporated in England & Wales. ShapeBlue Services India LLP
> is a
> >> company incorporated in India and is operated under license from Shape
> Blue
> >> Ltd. Shape Blue Brasil Consultoria Ltda is a company incorporated in
> Brasil
> >> and is operated under license from Shape Blue Ltd. ShapeBlue SA Pty Ltd
> is
> >> a company registered by The Republic of South Africa and is traded under
> >> license from Shape Blue Ltd. ShapeBlue is a registered trademark.
> >>
> >
> >
> >
> >--
> >Daan
>
--
Daan
