All,
I had hoped to get testing off the ground earlier, but $dayjob duties have
gotten in the way. Over the weekend, I am planning to kick off tests of the
following configurations:
• CentOS 6.8 management server + CentOS 6.8 KVM Hosts using NFS primary
and secondary storage (would allow us to verify/fix the documented libvirt/qemu
versions)
• CentOS 6.8 management server + vCenter 5.5u3d + ESXi 5.5u3b using NFS
primary and secondary storage
• CentOS 6.8 management server + vCenter 6.0u2 + ESXi Express Patch 6
using NFS primary and secondary storage
• CentOS 6.8 management server + XenServer 6.2 SP1 using NFS primary
and secondary storage
• CentOS 6.8 management server + XenServer 6.5 SP1 using NFS primary
and secondary storage
In each of these environments, I plan to run the following tests:
• All smoke tests
• Component Tests
• test_accounts.py
• test_acl_*.py
• test_sharednetwork*.py
• test_add_remove_network.py
• test_advancedsg_networks.py
• test_affinity_groups*.py
• test_cpu_domain_limits.py
• test_cpu_limits.py
• test_cpu_max_limits.py
• test_host_maintenance.py
• test_memory_limits.py
• test_network_offering.py
• test_overcommit.py
• test_persistent_networks.py
• test_ps_domain_limits.py
• test_ps_limits.py
• test_ps_max_limits.py
• test_ps_resize_volume.py
• test_ps_resource_limits_volume.py
• test_resource_limits.py
• test_routers.py
• test_security_groups.py
• test_shared_networks.py
• test_snapshots.py
• test_ss_domain_limits.py
• test_ss_limits.py
• test_ss_max_limits.py
• test_templates.py
• test_update_vm.py
• test_volumes.py
• test_vpc.py
I will start this set, and may adjust based on success rates and runtime.
I hope to post results by COB, Monday (27 June 2016).
Thanks,
-John
>
[email protected]
www.shapeblue.com
53 Chandos Place, Covent Garden, London VA WC2N 4HSUK
@shapeblue
On Jun 20, 2016, at 4:31 PM, John Burwell <[email protected]> wrote:
>
> All,
>
> I am working to coordinate some testing at ShapeBlue. I send an update as
> soon as I have the list of environment and tests we plan to run.
>
> Thanks,
> -John
>
>>
> [email protected]
> www.shapeblue.com
> 53 Chandos Place, Covent Garden, London VA WC2N 4HSUK
> @shapeblue
>
>
>
> On Jun 20, 2016, at 8:27 AM, Simon Weller <[email protected]> wrote:
>>
>>
>> Remi,
>>
>>
>> The KVM VXLAN feature uses the standard BridgeVifDriver, as OVS doesn't
>> support multicast.
>>
>>
>> To reproduce this:
>>
>>
>> Deploy 4.9 RPMS to Centos 7.2 installation, upgrading a 4.8 install.
>>
>> Restart existing VPC router pair for a established VPC.
>>
>> When VPC routers come back up, the guest tier (isolated) network is missing.
>>
>>
>> If you deploy a new VPC, the same problem occurs.
>>
>>
>> We have confirmed that the same problem exists on a non-redundant VPC router
>> as well.
>>
>>
>> David is working on reproducing this in a bubble. We have reproduced this on
>> 2 hardware labs thus far.
>>
>>
>> - Si
>>
>> ________________________________
>> From: Remi Bergsma <[email protected]>
>> Sent: Saturday, June 18, 2016 2:58 AM
>> To: [email protected]
>> Subject: Re: 4.9/master Testing Coordination
>>
>> Hi Simon,
>>
>> Do you have the exact stept to reproduce?
>> To me it sounds like the issue is in either the ovsVifDriver or the VXLAN
>> stuff. Can you reproduce the scenario in the bubble (with its default
>> vlan/bridgeVifDriver)?
>>
>> If there is a clear scenario, I think we should write an integration test
>> (even if that shows it’s broken).
>>
>> Regards, Remi
>>
>>
>> On 17/06/16 22:47, "Simon Weller" <[email protected]> wrote:
>>
>>> Here's a quick run down on the configuration(s) we're testing:
>>>
>>>
>>> Centos 7.2
>>>
>>> Advanced Zone with VXLAN on KVM
>>>
>>> VPC functionality including Private GW, VPN, Static Routes, ACL Lists et al
>>>
>>> Redundant VPC VRs
>>>
>>> Ceph Primary Storage
>>>
>>> NFS and S3 secondary storage
>>>
>>> As Will mentioned, we've found an odd issue with VPCs that we're still
>>> debugging.
>>>
>>> Here's a summary of what we've found thus far:
>>> When a tier is added, the network interface for the tier network is never
>>> plugged by libvirt. You only get 2 interfaces (eth0 and eth1). eth2 is
>>> never plugged when you attempt to provision the first VM within the VPC and
>>> the VM creation fails. If you have existing VMs and you restart the router,
>>> you lose the eth2 interface in the libvirt configuration (confirmed with a
>>> virsh dumpxml).
>>> If you leave the VRs alone after the upgrade, VMs can be provisioned
>>> correctly (until you reboot the VRs).
>>>
>>> I did also run into the NIO SSL agent not connecting problem again. When I
>>> telnetted to 8250, the agent immediately came up without me having to
>>> restart it. So keep an eye out for that as well.
>>>
>>>
>>> - Si
>>>
>>> ________________________________
>>> From: [email protected] <[email protected]> on behalf of Will
>>> Stevens <[email protected]>
>>> Sent: Friday, June 17, 2016 3:02 PM
>>> To: [email protected]
>>> Subject: Re: 4.9/master Testing Coordination
>>>
>>> Syed is looking into a potential issue with Swift as secondary storage on
>>> master.
>>>
>>> ENA is looking into a potential problem when upgrading a VR which was
>>> working in 4.8.0, but after an upgrade to 4.9.0 and restarting the network
>>> there are only 2 nics instead of 3. If they spin a new VR from scratch it
>>> seems to work. I need to follow up with them to see if they have an
>>> updated status of their testing.
>>>
>>> *Will STEVENS*
>>> Lead Developer
>>>
>>> *CloudOps* *| *Cloud Solutions Experts
>>> 420 rue Guy *|* Montreal *|* Quebec *|* H3J 1S6
>>> w cloudops.com *|* tw @CloudOps_
>>>
>>> On Fri, Jun 17, 2016 at 4:00 PM, Will Stevens <[email protected]> wrote:
>>>
>>>> The following tests are running cleanly on KVM with Advanced networking
>>>> and 2 hosts.
>>>>
>>>> echo "Running tests with required_hardware=true"
>>>> nosetests --with-marvin --marvin-config=${marvinCfg} -s -a
>>>> tags=advanced,required_hardware=true \
>>>> smoke/test_password_server.py \
>>>> smoke/test_vpc_redundant.py \
>>>> smoke/test_routers_iptables_default_policy.py \
>>>> smoke/test_routers_network_ops.py \
>>>> smoke/test_vpc_router_nics.py \
>>>> smoke/test_router_dhcphosts.py \
>>>> smoke/test_loadbalance.py \
>>>> smoke/test_internal_lb.py \
>>>> smoke/test_ssvm.py \
>>>> smoke/test_vpc_vpn.py \
>>>> smoke/test_privategw_acl.py \
>>>> smoke/test_network.py
>>>>
>>>> echo "Running tests with required_hardware=false"
>>>> nosetests --with-marvin --marvin-config=${marvinCfg} -s -a
>>>> tags=advanced,required_hardware=false \
>>>> smoke/test_routers.py \
>>>> smoke/test_network_acl.py \
>>>> smoke/test_reset_vm_on_reboot.py \
>>>> smoke/test_vm_life_cycle.py \
>>>> smoke/test_service_offerings.py \
>>>> smoke/test_network.py \
>>>> component/test_vpc_offerings.py \
>>>> component/test_vpc_routers.py
>>>>
>>>> I need to do some more manual testing...
>>>>
>>>> *Will STEVENS*
>>>> Lead Developer
>>>>
>>>> *CloudOps* *| *Cloud Solutions Experts
>>>> 420 rue Guy *|* Montreal *|* Quebec *|* H3J 1S6
>>>> w cloudops.com *|* tw @CloudOps_
>>>>
>>>> On Fri, Jun 17, 2016 at 3:45 PM, Tutkowski, Mike <
>>>> [email protected]> wrote:
>>>>
>>>>> My testing has been performed using XenServer 6.5 and ESXi 5.5.
>>>>>
>>>>> I executed all of the tests in test/integration/plugins/solidfire.
>>>>>
>>>>> They all came back successful.
>>>>> ________________________________________
>>>>> From: John Burwell <[email protected]>
>>>>> Sent: Friday, June 17, 2016 12:56 PM
>>>>> To: [email protected]
>>>>> Subject: 4.9/master Testing Coordination
>>>>>
>>>>> All,
>>>>>
>>>>> It is a bit lo-fi, but if you are testing master in preparation for the
>>>>> 4.9 RC, could you please share information about the configurations you
>>>>> testing (e.g. hypervisors, storage backends, network configurations, etc)?
>>>>> Any test results could also be helpful. The hope is to reduce duplication
>>>>> of effort and understand how much of the system has been covered.
>>>>>
>>>>> Thanks,
>>>>> -John
>>>>> [email protected]
>>>>> www.shapeblue.com<http://www.shapeblue.com>
>> ShapeBlue - The CloudStack Company<http://www.shapeblue.com/>
>> www.shapeblue.com
>> Overview Apache CloudStack contains an authentication module providing
>> “single sign-on” functionality via the SAML data format. Under certain
>> conditions, a
>>
>>
>>
>>> ShapeBlue - The CloudStack Company<http://www.shapeblue.com/>
>>> www.shapeblue.com<http://www.shapeblue.com>
>>> Overview Apache CloudStack contains an authentication module providing
>>> "single sign-on" functionality via the SAML data format. Under certain
>>> conditions, a
>>>
>>>
>>>
>>>>> 53 Chandos Place, Covent Garden, London VA WC2N 4HSUK
>>>>> @shapeblue
>
>
