> -----Original Message----- > From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Jijiang Liu > Sent: Tuesday, December 02, 2014 3:06 PM > To: dev at dpdk.org > Subject: [dpdk-dev] [PATCH v5 0/3] i40e VXLAN TX checksum rework > > We have got some feedback about backward compatibility of VXLAN TX checksum > offload API with 1G/10G NIC after the i40e VXLAN > TX checksum codes were applied, so we have to rework the APIs on i40e, > including the changes of mbuf, i40e PMD and csum forward > engine. > > The main changes in mbuf are as follows, in place of removing > PKT_TX_VXLAN_CKSUM, we introduce 4 new flags: > PKT_TX_OUTER_IP_CKSUM, PKT_TX_OUTER_IPV4, PKT_TX_OUTER_IPV6 and > PKT_TX_UDP_TUNNEL_PKT. Replace the inner_l2_len > and the inner_l3_len field with the outer_l2_len and outer_l3_len field. > > Let's use a few examples to demonstrate how to use these new flags and > existing flags in rte_mbuf.h > Let say we have a tunnel packet: > eth_hdr_out/ipv4_hdr_out/udp_hdr_out/vxlan_hdr/ehtr_hdr_in/ipv4_hdr_in/tcp_hdr_in. > There > could be several scenarios: > > A) User requests HW offload for ipv4_hdr_out checksum. > He doesn't care is it a tunnelled packet or not. So he sets: > > mb->l2_len = eth_hdr_out; > mb->l3_len = ipv4_hdr_out; > mb->ol_flags |= PKT_TX_IPV4_CSUM; > > B) User is aware that it is a tunnelled packet and requests HW offload for > ipv4_hdr_in and tcp_hdr_in *only*. > He doesn't care about outer IP checksum offload. In that case, for FVL he > has 2 choices: > 1. Treat that packet as a 'proper' tunnelled packet, and fill all the > fields: > mb->l2_len = udp_hdr_out + vxlan_hdr +eth_hdr_in; > mb->l3_len = ipv4_hdr_in; > mb->outer_l2_len = eth_hdr_out; > mb->outer_l3_len = ipv4_hdr_out; > mb->ol_flags |= PKT_TX_UDP_TUNNEL_PKT | PKT_TX_IP_CKSUM | > PKT_TX_TCP_CKSUM; > > 2. As user doesn't care about outer IP hdr checksum, he can treat > everything before ipv4_hdr_in as L2 header. > So he knows, that it is a tunnelled packet, but makes HW to treat it as > ordinary (non-tunnelled) packet: > mb->l2_len = eth_hdr_out + ipv4_hdr_out + udp_hdr_out + vxlan_hdr + > ehtr_hdr_in; > mb->l3_len = ipv4_hdr_in; > mb->ol_flags |= PKT_TX_IP_CKSUM | PKT_TX_TCP_CKSUM; > > i40e PMD will support both B.1 and B.2, but ixgbe/igb/em PMD supports only > B.2. > if HW supports both - it will be up to user app which method to choose. > tespmd will support both methods, and it should be configurable by user which > approach to use (cmdline parameter). > So the user can try/test both methods and select an appropriate for him. > > C) User knows that is a tunnelled packet, and wants HW offload for all 3 > checksums: outer IP hdr checksum, inner IP checksum, inner > TCP checksum. > Then he has to setup all TX checksum fields: > mb->l2_len = udp_hdr_out + vxlan_hdr +eth_hdr_in;; > mb->l3_len = ipv4_hdr_in; > mb->outer_l2_len = eth_hdr_out; > mb->outer_l3_len = ipv4_hdr_out; > mb->ol_flags |= PKT_TX_OUT_IP_CKSUM | PKT_TX_UDP_TUNNEL_PKT | > PKT_TX_IP_CKSUM | PKT_TX_TCP_CKSUM; > > Change notes: > v2 changes: > remove PKT_TX_IP_CKSUM alias. > add PKT_TX_OUT_IP_CKSUM and PKT_TX_OUTER_IPV6 in rte_get_tx_ol_flag_name. > spliting mbuf changes into two patches. > fix MACLEN caculation issue in i40e driver > fix some issues in csumonly.c > change cover letter. > v3 changes: > fix MACLEN caculation issue in i40e driver when non-tunneling packet > v4 changes: > reorganize patches to avoid compilation to be broken between patches. > remove l4_tun_len from mbuf structure. > add PKT_TX_OUTER_IPV4 to indicate no IP checksum offload requirement for > tunneling packet. > change i40e PMD and csum engine due to above changes. > > v5 changes: > according to Konstantin's comments, optimize process_outer_cksums() in > order to avoid setting PKT_TX_OUTER_IPV4 flags for the > case when user didn't enable TESTPMD_TX_OFFLOAD_VXLAN_CKSUM > > Jijiang Liu (3): > Redefine PKT_TX_IPV4, PKT_TX_IPV6 and PKT_TX_VLAN_PKT; > Replace PKT_TX_VXLAN_CKSUM with PKT_TX_UDP_TUNNEL_PKT, and add 3 TX flags, > which are PKT_TX_OUTER_IP_CKSUM, > PKT_TX_OUTER_IPV4 and PKT_TX_OUTER_IPV6,and rework csum forward engine and > i40e pmd due to these changes; > Replace the inner_l2_len and the inner_l3_len field with the outer_l2_len > and outer_l3_len field, and rework csum forward engine > and i40e pmd due to these changes; > > app/test-pmd/csumonly.c | 69 ++++++++++++++++++++++---------------- > lib/librte_mbuf/rte_mbuf.c | 7 +++- > lib/librte_mbuf/rte_mbuf.h | 25 +++++++++---- > lib/librte_pmd_i40e/i40e_rxtx.c | 44 +++++++++++++------------ > 4 files changed, 86 insertions(+), 59 deletions(-) > > -- > 1.7.7.6
Acked-by: Konstantin Ananyev <konstantin.ananyev at intel.com>