rx and tx number of queue might be different if RX and TX are
configured in different mode. This allow to inform VF about
proper number of queues.
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski at intel.com>
---
lib/librte_ether/rte_ethdev.c | 12 ++++++------
lib/librte_ether/rte_ethdev.h | 3 ++-
lib/librte_pmd_e1000/igb_pf.c | 3 ++-
lib/librte_pmd_ixgbe/ixgbe_ethdev.c | 2 +-
lib/librte_pmd_ixgbe/ixgbe_pf.c | 9 +++++----
5 files changed, 16 insertions(+), 13 deletions(-)
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index 2e814db..4007054 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -520,7 +520,7 @@ rte_eth_dev_check_vf_rss_rxq_num(uint8_t port_id, uint16_t
nb_rx_q)
return -EINVAL;
}
- RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool = nb_rx_q;
+ RTE_ETH_DEV_SRIOV(dev).nb_rx_q_per_pool = nb_rx_q;
RTE_ETH_DEV_SRIOV(dev).def_pool_q_idx =
dev->pci_dev->max_vfs * nb_rx_q;
@@ -567,7 +567,7 @@ rte_eth_dev_check_mq_mode(uint8_t port_id, uint16_t
nb_rx_q, uint16_t nb_tx_q,
dev->data->dev_conf.rxmode.mq_mode);
case ETH_MQ_RX_VMDQ_RSS:
dev->data->dev_conf.rxmode.mq_mode = ETH_MQ_RX_VMDQ_RSS;
- if (nb_rx_q <= RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool)
+ if (nb_rx_q <= RTE_ETH_DEV_SRIOV(dev).nb_rx_q_per_pool)
if (rte_eth_dev_check_vf_rss_rxq_num(port_id,
nb_rx_q) != 0) {
PMD_DEBUG_TRACE("ethdev port_id=%d"
" SRIOV active, invalid queue"
@@ -580,8 +580,8 @@ rte_eth_dev_check_mq_mode(uint8_t port_id, uint16_t
nb_rx_q, uint16_t nb_tx_q,
default: /* ETH_MQ_RX_VMDQ_ONLY or ETH_MQ_RX_NONE */
/* if nothing mq mode configure, use default scheme */
dev->data->dev_conf.rxmode.mq_mode =
ETH_MQ_RX_VMDQ_ONLY;
- if (RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool > 1)
- RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool = 1;
+ if (RTE_ETH_DEV_SRIOV(dev).nb_rx_q_per_pool > 1)
+ RTE_ETH_DEV_SRIOV(dev).nb_rx_q_per_pool = 1;
break;
}
@@ -600,8 +600,8 @@ rte_eth_dev_check_mq_mode(uint8_t port_id, uint16_t
nb_rx_q, uint16_t nb_tx_q,
}
/* check valid queue number */
- if ((nb_rx_q > RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool) ||
- (nb_tx_q > RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool)) {
+ if ((nb_rx_q > RTE_ETH_DEV_SRIOV(dev).nb_tx_q_per_pool) ||
+ (nb_tx_q > RTE_ETH_DEV_SRIOV(dev).nb_tx_q_per_pool)) {
PMD_DEBUG_TRACE("ethdev port_id=%d SRIOV active, "
"queue number must less equal to %d\n",
port_id,
RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool);
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 84160c3..af86401 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -1544,7 +1544,8 @@ struct rte_eth_dev {
struct rte_eth_dev_sriov {
uint8_t active; /**< SRIOV is active with 16, 32 or 64
pools */
- uint8_t nb_q_per_pool; /**< rx queue number per pool */
+ uint8_t nb_rx_q_per_pool; /**< rx queue number per pool */
+ uint8_t nb_tx_q_per_pool; /**< tx queue number per pool */
uint16_t def_vmdq_idx; /**< Default pool num used for PF */
uint16_t def_pool_q_idx; /**< Default pool queue start reg index */
};
diff --git a/lib/librte_pmd_e1000/igb_pf.c b/lib/librte_pmd_e1000/igb_pf.c
index bc3816a..9d2f858 100644
--- a/lib/librte_pmd_e1000/igb_pf.c
+++ b/lib/librte_pmd_e1000/igb_pf.c
@@ -115,7 +115,8 @@ void igb_pf_host_init(struct rte_eth_dev *eth_dev)
rte_panic("Cannot allocate memory for private VF data\n");
RTE_ETH_DEV_SRIOV(eth_dev).active = ETH_8_POOLS;
- RTE_ETH_DEV_SRIOV(eth_dev).nb_q_per_pool = nb_queue;
+ RTE_ETH_DEV_SRIOV(eth_dev).nb_rx_q_per_pool = nb_queue;
+ RTE_ETH_DEV_SRIOV(eth_dev).nb_tx_q_per_pool = nb_queue;
RTE_ETH_DEV_SRIOV(eth_dev).def_vmdq_idx = vf_num;
RTE_ETH_DEV_SRIOV(eth_dev).def_pool_q_idx = (uint16_t)(vf_num *
nb_queue);
diff --git a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
index d6d408e..02b9cda 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
@@ -3564,7 +3564,7 @@ static int ixgbe_set_vf_rate_limit(struct rte_eth_dev
*dev, uint16_t vf,
struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
struct ixgbe_vf_info *vfinfo =
*(IXGBE_DEV_PRIVATE_TO_P_VFDATA(dev->data->dev_private));
- uint8_t nb_q_per_pool = RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool;
+ uint8_t nb_q_per_pool = RTE_ETH_DEV_SRIOV(dev).nb_tx_q_per_pool;
uint32_t queue_stride =
IXGBE_MAX_RX_QUEUE_NUM / RTE_ETH_DEV_SRIOV(dev).active;
uint32_t queue_idx = vf * queue_stride, idx = 0, vf_idx;
diff --git a/lib/librte_pmd_ixgbe/ixgbe_pf.c b/lib/librte_pmd_ixgbe/ixgbe_pf.c
index dbda9b5..4103e97 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_pf.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_pf.c
@@ -129,7 +129,8 @@ void ixgbe_pf_host_init(struct rte_eth_dev *eth_dev)
RTE_ETH_DEV_SRIOV(eth_dev).active = ETH_16_POOLS;
}
- RTE_ETH_DEV_SRIOV(eth_dev).nb_q_per_pool = nb_queue;
+ RTE_ETH_DEV_SRIOV(eth_dev).nb_rx_q_per_pool = nb_queue;
+ RTE_ETH_DEV_SRIOV(eth_dev).nb_tx_q_per_pool = nb_queue;
RTE_ETH_DEV_SRIOV(eth_dev).def_vmdq_idx = vf_num;
RTE_ETH_DEV_SRIOV(eth_dev).def_pool_q_idx = (uint16_t)(vf_num *
nb_queue);
@@ -497,7 +498,7 @@ ixgbe_get_vf_queues(struct rte_eth_dev *dev, uint32_t vf,
uint32_t *msgbuf)
{
struct ixgbe_vf_info *vfinfo =
*IXGBE_DEV_PRIVATE_TO_P_VFDATA(dev->data->dev_private);
- uint32_t default_q = vf * RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool;
+ uint32_t default_q = vf * RTE_ETH_DEV_SRIOV(dev).nb_tx_q_per_pool;
/* Verify if the PF supports the mbox APIs version or not */
switch (vfinfo[vf].api_version) {
@@ -509,8 +510,8 @@ ixgbe_get_vf_queues(struct rte_eth_dev *dev, uint32_t vf,
uint32_t *msgbuf)
}
/* Notify VF of Rx and Tx queue number */
- msgbuf[IXGBE_VF_RX_QUEUES] = RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool;
- msgbuf[IXGBE_VF_TX_QUEUES] = RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool;
+ msgbuf[IXGBE_VF_RX_QUEUES] = RTE_ETH_DEV_SRIOV(dev).nb_rx_q_per_pool;
+ msgbuf[IXGBE_VF_TX_QUEUES] = RTE_ETH_DEV_SRIOV(dev).nb_tx_q_per_pool;
/* Notify VF of default queue */
msgbuf[IXGBE_VF_DEF_QUEUE] = default_q;
--
1.9.1
