On systems that support LPLU in the firmware, the driver wouldn't be
aware of the LPLU speed change, and it wouldn't cache the new value when
the driver resumes. This patch emulates the same behavior by restoring
the previous autoneg settings to autoneg_advertised.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu at intel.com>
---
drivers/net/ixgbe/base/ixgbe_x550.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/net/ixgbe/base/ixgbe_x550.c
b/drivers/net/ixgbe/base/ixgbe_x550.c
index 57ecaac..3a4d725 100644
--- a/drivers/net/ixgbe/base/ixgbe_x550.c
+++ b/drivers/net/ixgbe/base/ixgbe_x550.c
@@ -2541,6 +2541,7 @@ s32 ixgbe_enter_lplu_t_x550em(struct ixgbe_hw *hw)
u16 autoneg_status, an_10g_cntl_reg, autoneg_reg, speed;
s32 status;
ixgbe_link_speed lcd_speed;
+ u32 save_autoneg;
/* If blocked by MNG FW, then don't restart AN */
if (ixgbe_check_reset_blocked(hw))
@@ -2616,9 +2617,14 @@ s32 ixgbe_enter_lplu_t_x550em(struct ixgbe_hw *hw)
if (status != IXGBE_SUCCESS)
return status;
+ save_autoneg = hw->phy.autoneg_advertised;
+
/* Setup link at least common link speed */
status = hw->mac.ops.setup_link(hw, lcd_speed, false);
+ /* restore autoneg from before setting lplu speed */
+ hw->phy.autoneg_advertised = save_autoneg;
+
return status;
}
--
1.9.3
