[dpdk-dev] [PATCH 11/37] ixgbe/base: fix UniPHY link configuration

[Wenzhuo Lu]

In UniPHY we have 2 IOSF targets that are UniPHY related. We can
write to PHY and PCS. In earlier times I've been told that there
were 2 separate PCS targets for IOSF commands and that's why I
implemented it with 2 defines and adding hw->bus.lan_id, but lately
I confirmed with HW that FW takes care of which PCS "slice" we are
talking to and is directing writes to correct one, so KX4_PCS1
target is dead now and we cannot use it.

Signed-off-by: Wenzhuo Lu <wenzhuo.lu at intel.com>
---
 drivers/net/ixgbe/base/ixgbe_type.h | 5 ++---
 drivers/net/ixgbe/base/ixgbe_x550.c | 4 ++--
 2 files changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ixgbe/base/ixgbe_type.h 
b/drivers/net/ixgbe/base/ixgbe_type.h
index 576bb24..de73172 100644
--- a/drivers/net/ixgbe/base/ixgbe_type.h
+++ b/drivers/net/ixgbe/base/ixgbe_type.h
@@ -3900,8 +3900,7 @@ struct ixgbe_hw {
 #define IXGBE_SB_IOSF_CTRL_BUSY_SHIFT          31
 #define IXGBE_SB_IOSF_CTRL_BUSY                (1 << 
IXGBE_SB_IOSF_CTRL_BUSY_SHIFT)
 #define IXGBE_SB_IOSF_TARGET_KR_PHY    0
-#define IXGBE_SB_IOSF_TARGET_KX4_UNIPHY        1
-#define IXGBE_SB_IOSF_TARGET_KX4_PCS0  2
-#define IXGBE_SB_IOSF_TARGET_KX4_PCS1  3
+#define IXGBE_SB_IOSF_TARGET_KX4_PHY   1
+#define IXGBE_SB_IOSF_TARGET_KX4_PCS   2

 #endif /* _IXGBE_TYPE_H_ */
diff --git a/drivers/net/ixgbe/base/ixgbe_x550.c 
b/drivers/net/ixgbe/base/ixgbe_x550.c
index 3a4d725..5eb0218 100644
--- a/drivers/net/ixgbe/base/ixgbe_x550.c
+++ b/drivers/net/ixgbe/base/ixgbe_x550.c
@@ -1572,7 +1572,7 @@ s32 ixgbe_setup_kx4_x550em(struct ixgbe_hw *hw)
        u32 reg_val;

        status = ixgbe_read_iosf_sb_reg_x550(hw, IXGBE_KX4_LINK_CNTL_1,
-               IXGBE_SB_IOSF_TARGET_KX4_PCS0 + hw->bus.lan_id, &reg_val);
+               IXGBE_SB_IOSF_TARGET_KX4_PCS, &reg_val);
        if (status)
                return status;

@@ -1592,7 +1592,7 @@ s32 ixgbe_setup_kx4_x550em(struct ixgbe_hw *hw)
        /* Restart auto-negotiation. */
        reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_RESTART;
        status = ixgbe_write_iosf_sb_reg_x550(hw, IXGBE_KX4_LINK_CNTL_1,
-               IXGBE_SB_IOSF_TARGET_KX4_PCS0 + hw->bus.lan_id, reg_val);
+               IXGBE_SB_IOSF_TARGET_KX4_PCS, reg_val);

        return status;
 }
-- 
1.9.3