The driver does lots of logging at INFO level, but some setup events are significant and should be at NOTICE or ERR level since they are problems that user should see.
Also never put tabs in log messages because they get mangled by syslog processing. Signed-off-by: Stephen Hemminger <stephen at networkplumber.org> --- lib/librte_pmd_ixgbe/ixgbe_ethdev.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c index fa335f4..7e75382 100644 --- a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c +++ b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c @@ -1054,8 +1054,8 @@ eth_ixgbevf_dev_init(struct rte_eth_dev *eth_dev) eth_dev->data->mac_addrs = NULL; return diag; } - PMD_INIT_LOG(INFO, "\tVF MAC address not assigned by Host PF"); - PMD_INIT_LOG(INFO, "\tAssign randomly generated MAC address " + PMD_INIT_LOG(NOTICE, "VF MAC address not assigned by Host PF"); + PMD_INIT_LOG(NOTICE, "Assign randomly generated MAC address " "%02x:%02x:%02x:%02x:%02x:%02x", perm_addr->addr_bytes[0], perm_addr->addr_bytes[1], @@ -1248,7 +1248,7 @@ ixgbe_vlan_hw_strip_disable(struct rte_eth_dev *dev, uint16_t queue) if (hw->mac.type == ixgbe_mac_82598EB) { /* No queue level support */ - PMD_INIT_LOG(INFO, "82598EB not support queue level hw strip"); + PMD_INIT_LOG(ERR, "82598EB not support queue level hw strip"); return; } else { @@ -1272,7 +1272,7 @@ ixgbe_vlan_hw_strip_enable(struct rte_eth_dev *dev, uint16_t queue) if (hw->mac.type == ixgbe_mac_82598EB) { /* No queue level supported */ - PMD_INIT_LOG(INFO, "82598EB not support queue level hw strip"); + PMD_INIT_LOG(ERR, "82598EB not support queue level hw strip"); return; } else { @@ -2951,12 +2951,12 @@ ixgbevf_dev_configure(struct rte_eth_dev *dev) */ #ifndef RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC if (!conf->rxmode.hw_strip_crc) { - PMD_INIT_LOG(INFO, "VF can't disable HW CRC Strip"); + PMD_INIT_LOG(NOTICE, "VF can't disable HW CRC Strip"); conf->rxmode.hw_strip_crc = 1; } #else if (conf->rxmode.hw_strip_crc) { - PMD_INIT_LOG(INFO, "VF can't enable HW CRC Strip"); + PMD_INIT_LOG(NOTICE, "VF can't enable HW CRC Strip"); conf->rxmode.hw_strip_crc = 0; } #endif -- 2.1.4