On Fri, May 15, 2015 at 10:08:27AM -0700, Stephen Hemminger wrote: > The ixgbe driver likes to be far to chatty in the system log > which is good for the original developer but not good for a production > product. All the normal messages should be changed from INFO to DEBUG. > > Signed-off-by: Stephen Hemminger <stephen at networkplumber.org>
For the most part, this looks fine. However, I'm unsure about changing the log level of the messages stating what the RX and TX burst functions in use are. I would view this as important information that should generally be displayed as the performance impacts of using a sub-optimal RX/TX code path are large. /Bruce > --- > lib/librte_pmd_ixgbe/ixgbe_ethdev.c | 14 +++++++------- > lib/librte_pmd_ixgbe/ixgbe_rxtx.c | 20 ++++++++++---------- > 2 files changed, 17 insertions(+), 17 deletions(-) > > diff --git a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c > b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c > index 7e75382..bb24a17 100644 > --- a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c > +++ b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c > @@ -568,7 +568,7 @@ ixgbe_dev_queue_stats_mapping_set(struct rte_eth_dev > *eth_dev, > (hw->mac.type != ixgbe_mac_X550EM_x)) > return -ENOSYS; > > - PMD_INIT_LOG(INFO, "Setting port %u, %s queue_id %d to stat index %d", > + PMD_INIT_LOG(DEBUG, "Setting port %u, %s queue_id %d to stat index %d", > eth_dev->data->port_id, is_rx ? "RX" : "TX", > queue_id, stat_idx); > > @@ -594,20 +594,20 @@ ixgbe_dev_queue_stats_mapping_set(struct rte_eth_dev > *eth_dev, > else > stat_mappings->rqsmr[n] |= qsmr_mask; > > - PMD_INIT_LOG(INFO, "Set port %u, %s queue_id %d to stat index %d", > + PMD_INIT_LOG(DEBUG, "Set port %u, %s queue_id %d to stat index %d", > eth_dev->data->port_id, is_rx ? "RX" : "TX", > queue_id, stat_idx); > - PMD_INIT_LOG(INFO, "%s[%d] = 0x%08x", is_rx ? "RQSMR" : "TQSM", n, > + PMD_INIT_LOG(DEBUG, "%s[%d] = 0x%08x", is_rx ? "RQSMR" : "TQSM", n, > is_rx ? stat_mappings->rqsmr[n] : stat_mappings->tqsm[n]); > > /* Now write the mapping in the appropriate register */ > if (is_rx) { > - PMD_INIT_LOG(INFO, "Write 0x%x to RX IXGBE stat mapping reg:%d", > + PMD_INIT_LOG(DEBUG, "Write 0x%x to RX IXGBE stat mapping > reg:%d", > stat_mappings->rqsmr[n], n); > IXGBE_WRITE_REG(hw, IXGBE_RQSMR(n), stat_mappings->rqsmr[n]); > } > else { > - PMD_INIT_LOG(INFO, "Write 0x%x to TX IXGBE stat mapping reg:%d", > + PMD_INIT_LOG(DEBUG, "Write 0x%x to TX IXGBE stat mapping > reg:%d", > stat_mappings->tqsm[n], n); > IXGBE_WRITE_REG(hw, IXGBE_TQSM(n), stat_mappings->tqsm[n]); > } > @@ -751,7 +751,7 @@ eth_ixgbe_dev_init(struct rte_eth_dev *eth_dev) > ixgbe_set_tx_function(eth_dev, txq); > } else { > /* Use default TX function if we get here */ > - PMD_INIT_LOG(INFO, "No TX queues configured yet. " > + PMD_INIT_LOG(DEBUG, "No TX queues configured yet. " > "Using default TX function."); > } > > @@ -2275,7 +2275,7 @@ ixgbe_dev_interrupt_get_status(struct rte_eth_dev *dev) > > /* read-on-clear nic registers here */ > eicr = IXGBE_READ_REG(hw, IXGBE_EICR); > - PMD_DRV_LOG(INFO, "eicr %x", eicr); > + PMD_DRV_LOG(DEBUG, "eicr %x", eicr); > > intr->flags = 0; > if (eicr & IXGBE_EICR_LSC) { > diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c > b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c > index 57c9430..08830bf 100644 > --- a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c > +++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c > @@ -1871,23 +1871,23 @@ ixgbe_set_tx_function(struct rte_eth_dev *dev, struct > ixgbe_tx_queue *txq) > /* Use a simple Tx queue (no offloads, no multi segs) if possible */ > if (((txq->txq_flags & IXGBE_SIMPLE_FLAGS) == IXGBE_SIMPLE_FLAGS) > && (txq->tx_rs_thresh >= RTE_PMD_IXGBE_TX_MAX_BURST)) { > - PMD_INIT_LOG(INFO, "Using simple tx code path"); > + PMD_INIT_LOG(DEBUG, "Using simple tx code path"); > #ifdef RTE_IXGBE_INC_VECTOR > if (txq->tx_rs_thresh <= RTE_IXGBE_TX_MAX_FREE_BUF_SZ && > (rte_eal_process_type() != RTE_PROC_PRIMARY || > ixgbe_txq_vec_setup(txq) == 0)) { > - PMD_INIT_LOG(INFO, "Vector tx enabled."); > + PMD_INIT_LOG(DEBUG, "Vector tx enabled."); > dev->tx_pkt_burst = ixgbe_xmit_pkts_vec; > } else > #endif > dev->tx_pkt_burst = ixgbe_xmit_pkts_simple; > } else { > - PMD_INIT_LOG(INFO, "Using full-featured tx code path"); > - PMD_INIT_LOG(INFO, > + PMD_INIT_LOG(DEBUG, "Using full-featured tx code path"); > + PMD_INIT_LOG(DEBUG, > " - txq_flags = %lx " > "[IXGBE_SIMPLE_FLAGS=%lx]", > (unsigned long)txq->txq_flags, > (unsigned long)IXGBE_SIMPLE_FLAGS); > - PMD_INIT_LOG(INFO, > + PMD_INIT_LOG(DEBUG, > " - tx_rs_thresh = %lu " > "[RTE_PMD_IXGBE_TX_MAX_BURST=%lu]", > (unsigned long)txq->tx_rs_thresh, > (unsigned long)RTE_PMD_IXGBE_TX_MAX_BURST); > @@ -3761,11 +3761,11 @@ void ixgbe_set_rx_function(struct rte_eth_dev *dev) > */ > if (dev->data->lro) { > if (adapter->rx_bulk_alloc_allowed) { > - PMD_INIT_LOG(INFO, "LRO is requested. Using a bulk " > + PMD_INIT_LOG(DEBUG, "LRO is requested. Using a bulk " > "allocation version"); > dev->rx_pkt_burst = ixgbe_recv_pkts_lro_bulk_alloc; > } else { > - PMD_INIT_LOG(INFO, "LRO is requested. Using a single " > + PMD_INIT_LOG(DEBUG, "LRO is requested. Using a single " > "allocation version"); > dev->rx_pkt_burst = ixgbe_recv_pkts_lro_single_alloc; > } > @@ -3781,7 +3781,7 @@ void ixgbe_set_rx_function(struct rte_eth_dev *dev) > > dev->rx_pkt_burst = ixgbe_recv_scattered_pkts_vec; > } else if (adapter->rx_bulk_alloc_allowed) { > - PMD_INIT_LOG(INFO, "Using a Scattered with bulk " > + PMD_INIT_LOG(DEBUG, "Using a Scattered with bulk " > "allocation callback (port=%d).", > dev->data->port_id); > dev->rx_pkt_burst = ixgbe_recv_pkts_lro_bulk_alloc; > @@ -3803,7 +3803,7 @@ void ixgbe_set_rx_function(struct rte_eth_dev *dev) > * - Single buffer allocation (the simplest one) > */ > } else if (adapter->rx_vec_allowed) { > - PMD_INIT_LOG(INFO, "Vector rx enabled, please make sure RX " > + PMD_INIT_LOG(DEBUG, "Vector rx enabled, please make sure RX " > "burst size no less than 32."); > > dev->rx_pkt_burst = ixgbe_recv_pkts_vec; > @@ -3961,7 +3961,7 @@ ixgbe_set_rsc(struct rte_eth_dev *dev) > > dev->data->lro = 1; > > - PMD_INIT_LOG(INFO, "enabling LRO mode"); > + PMD_INIT_LOG(DEBUG, "enabling LRO mode"); > > return 0; > } > -- > 2.1.4 >