> -----Original Message-----
> From: Jayatheerthan, Jay <jay.jayatheert...@intel.com>
> Sent: Wednesday, December 14, 2022 1:01 PM
> To: Naga Harish K, S V <s.v.naga.haris...@intel.com>; jer...@marvell.com;
> Carrillo, Erik G <erik.g.carri...@intel.com>; Gujjar, Abhinandan S
> <abhinandan.guj...@intel.com>
> Cc: dev@dpdk.org
> Subject: RE: [PATCH v2 1/4] eventdev/eth_rx: change eventdev reconfig
> logic
>
> > -----Original Message-----
> > From: Naga Harish K, S V <s.v.naga.haris...@intel.com>
> > Sent: Wednesday, December 14, 2022 12:35 PM
> > To: jer...@marvell.com; Carrillo, Erik G <erik.g.carri...@intel.com>;
> > Gujjar, Abhinandan S <abhinandan.guj...@intel.com>
> > Cc: dev@dpdk.org; Jayatheerthan, Jay <jay.jayatheert...@intel.com>
> > Subject: [PATCH v2 1/4] eventdev/eth_rx: change eventdev reconfig
> > logic
> >
> > When rte_event_eth_rx_adapter_create() or
> > rte_event_eth_rx_adapter_create_with_params() is used for creating
> > adapter instance, eventdev is reconfigured with additional
> > ``rte_event_dev_config::nb_event_ports`` parameter.
> >
> > This eventdev reconfig logic is enhanced to increment the
> > ``rte_event_dev_config::nb_single_link_event_port_queues``
> > parameter if the adapter event port config is of type
> > ``RTE_EVENT_PORT_CFG_SINGLE_LINK``.
> >
> > With this change the application no longer need to configure the
> > eventdev with
> > ``rte_event_dev_config::nb_single_link_event_port_queues``
> > parameter required for eth_rx adapter when the adapter is created
> > using above mentioned apis.
> >
> > Signed-off-by: Naga Harish K S V <s.v.naga.haris...@intel.com>
> > ---
> > v2:
> > * Fix build error
> > ---
> > ---
> > .../prog_guide/event_ethernet_rx_adapter.rst | 18
> ++++++++++++++++++
> > lib/eventdev/rte_event_eth_rx_adapter.c | 3 +++
> > 2 files changed, 21 insertions(+)
> >
> > diff --git a/doc/guides/prog_guide/event_ethernet_rx_adapter.rst
> > b/doc/guides/prog_guide/event_ethernet_rx_adapter.rst
> > index 116c0a27c6..8fc9be0a9d 100644
> > --- a/doc/guides/prog_guide/event_ethernet_rx_adapter.rst
> > +++ b/doc/guides/prog_guide/event_ethernet_rx_adapter.rst
> > @@ -71,6 +71,24 @@ set to true. The function is passed the event
> > device to be associated with the adapter and port configuration for
> > the adapter to setup an event port if the adapter needs to use a service
> function.
> >
> > +Event device configuration for service based adapter
> > +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > +
> > +When rte_event_eth_rx_adapter_create() or
> > +rte_event_eth_rx_adapter_create_with_params() is used for creating
> > +adapter instance, eventdev is reconfigured with additional
> > +``rte_event_dev_config::nb_event_ports`` parameter.
> > +This eventdev reconfig logic also increment the
> > +``rte_event_dev_config::nb_single_link_event_port_queues``
> > +parameter if the adapter event port config is of type
> > +``RTE_EVENT_PORT_CFG_SINGLE_LINK``.
> > +
> > +So the application is no longer need to configure the event device
> > +with ``rte_event_dev_config::nb_event_ports`` and
> > +``rte_event_dev_config::nb_single_link_event_port_queues``
> > +parameters required for eth_rx adapter when the adapter is created
> > +using above mentioned apis.
> > +
> > Adding Rx Queues to the Adapter Instance
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > diff --git a/lib/eventdev/rte_event_eth_rx_adapter.c
> > b/lib/eventdev/rte_event_eth_rx_adapter.c
> > index cf7bbd4d69..34aa87379e 100644
> > --- a/lib/eventdev/rte_event_eth_rx_adapter.c
> > +++ b/lib/eventdev/rte_event_eth_rx_adapter.c
> > @@ -1532,6 +1532,9 @@ rxa_default_conf_cb(uint8_t id, uint8_t dev_id,
> > rte_event_dev_stop(dev_id);
> > port_id = dev_conf.nb_event_ports;
> > dev_conf.nb_event_ports += 1;
> > + if (port_conf->event_port_cfg &
> RTE_EVENT_PORT_CFG_SINGLE_LINK)
> > + dev_conf.nb_single_link_event_port_queues += 1;
>
> Can add more comments in doxygen for nb_single_link_event_port_queues
> and nb_event_ports fields pointing out they are configured by application
> with worker necessity in mind. Adapter necessity is handled in adapter
> create now.
>
> This comment can be applied to other adapters as well.
>
The above details are covered in the programming guide already.
> > +
> > ret = rte_event_dev_configure(dev_id, &dev_conf);
> > if (ret) {
> > RTE_EDEV_LOG_ERR("failed to configure event dev %u\n",
> > --
> > 2.25.1
