> -----Original Message-----
> From: Naga Harish K, S V <s.v.naga.haris...@intel.com>
> Sent: Monday, December 19, 2022 11:03 AM
> To: jer...@marvell.com; Carrillo, Erik G <erik.g.carri...@intel.com>; Gujjar,
> Abhinandan S <abhinandan.guj...@intel.com>
> Cc: dev@dpdk.org; Jayatheerthan, Jay <jay.jayatheert...@intel.com>
> Subject: [PATCH v3 4/4] eventdev/timer: change eventdev reconfig logic
>
> When rte_event_timer_adapter_create() is used for creating adapter instance,
> eventdev is reconfigured with additional
> ``rte_event_dev_config::nb_event_ports`` parameter.
>
> This eventdev reconfig logic is enhanced to increment the
> ``rte_event_dev_config::nb_single_link_event_port_queues``
> parameter if the adapter event port config is of type
> ``RTE_EVENT_PORT_CFG_SINGLE_LINK``.
>
> With this change the application is no longer need to configure the eventdev
> with ``rte_event_dev_config::nb_single_link_event_port_queues``
> parameter required for timer adapter when the adapter is created using above
> mentioned api.
>
> Signed-off-by: Naga Harish K S V <s.v.naga.haris...@intel.com>
> ---
> v2:
> * fix build error in documentation
> v3:
> * update doxygen
> ---
> ---
> doc/guides/prog_guide/event_timer_adapter.rst | 17 ++++++++++++++
> lib/eventdev/rte_event_timer_adapter.c | 23 +++++++++++--------
> lib/eventdev/rte_event_timer_adapter.h | 13 +++++++++++
> 3 files changed, 43 insertions(+), 10 deletions(-)
>
> diff --git a/doc/guides/prog_guide/event_timer_adapter.rst
> b/doc/guides/prog_guide/event_timer_adapter.rst
> index d7307a29bb..3dc7144798 100644
> --- a/doc/guides/prog_guide/event_timer_adapter.rst
> +++ b/doc/guides/prog_guide/event_timer_adapter.rst
> @@ -139,6 +139,23 @@ This function is passed a callback function that will
> be invoked if the adapter needs to create an event port, giving the
> application
> the opportunity to control how it is done.
>
> +Event device configuration for service based adapter
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +When rte_event_eth_rx_adapter_create() is used for creating adapter
This has reference to eth_rx adapter please update it.
With the changes you can add ACK.
> +instance, eventdev is reconfigured with additional
> +``rte_event_dev_config::nb_event_ports`` parameter.
> +This eventdev reconfig logic also increment the
> +``rte_event_dev_config::nb_single_link_event_port_queues``
> +parameter if the adapter event port config is of type
> +``RTE_EVENT_PORT_CFG_SINGLE_LINK``.
> +
> +So the application is no longer need to configure the event device with
> +``rte_event_dev_config::nb_event_ports`` and
> +``rte_event_dev_config::nb_single_link_event_port_queues``
> +parameters required for timer adapter when the adapter is created using
> +above mentioned api.
> +
> Adapter modes
> ^^^^^^^^^^^^^
> An event timer adapter can be configured in either periodic or non-periodic
> mode diff --git a/lib/eventdev/rte_event_timer_adapter.c
> b/lib/eventdev/rte_event_timer_adapter.c
> index a0f14bf861..5ed233db00 100644
> --- a/lib/eventdev/rte_event_timer_adapter.c
> +++ b/lib/eventdev/rte_event_timer_adapter.c
> @@ -88,7 +88,20 @@ default_port_conf_cb(uint16_t id, uint8_t
> event_dev_id, uint8_t *event_port_id,
> rte_event_dev_stop(dev_id);
>
> port_id = dev_conf.nb_event_ports;
> + if (conf_arg != NULL)
> + port_conf = conf_arg;
> + else {
> + port_conf = &def_port_conf;
> + ret = rte_event_port_default_conf_get(dev_id, port_id,
> + port_conf);
> + if (ret < 0)
> + return ret;
> + }
> +
> dev_conf.nb_event_ports += 1;
> + if (port_conf->event_port_cfg &
> RTE_EVENT_PORT_CFG_SINGLE_LINK)
> + dev_conf.nb_single_link_event_port_queues += 1;
> +
> ret = rte_event_dev_configure(dev_id, &dev_conf);
> if (ret < 0) {
> EVTIM_LOG_ERR("failed to configure event dev %u\n",
> dev_id); @@ -99,16 +112,6 @@ default_port_conf_cb(uint16_t id, uint8_t
> event_dev_id, uint8_t *event_port_id,
> return ret;
> }
>
> - if (conf_arg != NULL)
> - port_conf = conf_arg;
> - else {
> - port_conf = &def_port_conf;
> - ret = rte_event_port_default_conf_get(dev_id, port_id,
> - port_conf);
> - if (ret < 0)
> - return ret;
> - }
> -
> ret = rte_event_port_setup(dev_id, port_id, port_conf);
> if (ret < 0) {
> EVTIM_LOG_ERR("failed to setup event port %u on event dev
> %u\n", diff --git a/lib/eventdev/rte_event_timer_adapter.h
> b/lib/eventdev/rte_event_timer_adapter.h
> index cd10db19e4..4b757773db 100644
> --- a/lib/eventdev/rte_event_timer_adapter.h
> +++ b/lib/eventdev/rte_event_timer_adapter.h
> @@ -212,6 +212,19 @@ typedef int
> (*rte_event_timer_adapter_port_conf_cb_t)(uint16_t id,
> *
> * This function must be invoked first before any other function in the API.
> *
> + * When this API is used for creating adapter instance, eventdev is
> + * reconfigured with additional
> + ``rte_event_dev_config::nb_event_ports``
> + * parameter during service initialization. This eventdev reconfig
> + logic also
> + * increment the
> + ``rte_event_dev_config::nb_single_link_event_port_queues``
> + * parameter if the adapter event port config is of type
> + * ``RTE_EVENT_PORT_CFG_SINGLE_LINK``.
> + *
> + * So the application is no longer need to account for
> + * ``rte_event_dev_config::nb_event_ports`` and
> + * ``rte_event_dev_config::nb_single_link_event_port_queues``
> + * parameters required for Timer adapter in eventdev configure when
> + * the adapter is created with this api.
> + *
> * @param conf
> * The event timer adapter configuration structure.
> *
> --
> 2.25.1
