Add new parameter "model" to choose dispatch or rtc worker model.
And in dispatch model, the node will affinity to worker core successively.
Note:
only support one RX node for remote model in current implementation.
./dpdk-l3fwd-graph -l 8,9,10,11 -n 4 -- -p 0x1 --config="(0,0,9)" -P
--model="dispatch"
Signed-off-by: Haiyue Wang <haiyue.w...@intel.com>
Signed-off-by: Cunming Liang <cunming.li...@intel.com>
Signed-off-by: Zhirun Yan <zhirun....@intel.com>
---
examples/l3fwd-graph/main.c | 237 +++++++++++++++++++++++++++++-------
1 file changed, 195 insertions(+), 42 deletions(-)
diff --git a/examples/l3fwd-graph/main.c b/examples/l3fwd-graph/main.c
index 5feeab4f0f..cfa78003f4 100644
--- a/examples/l3fwd-graph/main.c
+++ b/examples/l3fwd-graph/main.c
@@ -55,6 +55,9 @@
#define NB_SOCKETS 8
+/* Graph module */
+#define WORKER_MODEL_RTC "rtc"
+#define WORKER_MODEL_MCORE_DISPATCH "dispatch"
/* Static global variables used within this file. */
static uint16_t nb_rxd = RX_DESC_DEFAULT;
static uint16_t nb_txd = TX_DESC_DEFAULT;
@@ -88,6 +91,10 @@ struct lcore_rx_queue {
char node_name[RTE_NODE_NAMESIZE];
};
+struct model_conf {
+ enum rte_graph_worker_model model;
+};
+
/* Lcore conf */
struct lcore_conf {
uint16_t n_rx_queue;
@@ -153,6 +160,19 @@ static struct ipv4_l3fwd_lpm_route
ipv4_l3fwd_lpm_route_array[] = {
{RTE_IPV4(198, 18, 6, 0), 24, 6}, {RTE_IPV4(198, 18, 7, 0), 24, 7},
};
+static int
+check_worker_model_params(void)
+{
+ if (rte_graph_worker_model_get() == RTE_GRAPH_MODEL_MCORE_DISPATCH &&
+ nb_lcore_params > 1) {
+ printf("Exceeded max number of lcore params for remote model:
%hu\n",
+ nb_lcore_params);
+ return -1;
+ }
+
+ return 0;
+}
+
static int
check_lcore_params(void)
{
@@ -276,6 +296,7 @@ print_usage(const char *prgname)
" --eth-dest=X,MM:MM:MM:MM:MM:MM: Ethernet destination for "
"port X\n"
" --max-pkt-len PKTLEN: maximum packet length in decimal
(64-9600)\n"
+ " --model NAME: walking model name, dispatch or rtc(by
default)\n"
" --no-numa: Disable numa awareness\n"
" --per-port-pool: Use separate buffer pool per port\n"
" --pcap-enable: Enables pcap capture\n"
@@ -318,6 +339,20 @@ parse_max_pkt_len(const char *pktlen)
return len;
}
+static int
+parse_worker_model(const char *model)
+{
+ if (strcmp(model, WORKER_MODEL_MCORE_DISPATCH) == 0) {
+ rte_graph_worker_model_set(RTE_GRAPH_MODEL_MCORE_DISPATCH);
+ return RTE_GRAPH_MODEL_MCORE_DISPATCH;
+ } else if (strcmp(model, WORKER_MODEL_RTC) == 0)
+ return RTE_GRAPH_MODEL_RTC;
+
+ rte_exit(EXIT_FAILURE, "Invalid worker model: %s", model);
+
+ return RTE_GRAPH_MODEL_LIST_END;
+}
+
static int
parse_portmask(const char *portmask)
{
@@ -434,6 +469,8 @@ static const char short_options[] = "p:" /* portmask */
#define CMD_LINE_OPT_PCAP_ENABLE "pcap-enable"
#define CMD_LINE_OPT_NUM_PKT_CAP "pcap-num-cap"
#define CMD_LINE_OPT_PCAP_FILENAME "pcap-file-name"
+#define CMD_LINE_OPT_WORKER_MODEL "model"
+
enum {
/* Long options mapped to a short option */
@@ -449,6 +486,7 @@ enum {
CMD_LINE_OPT_PARSE_PCAP_ENABLE,
CMD_LINE_OPT_PARSE_NUM_PKT_CAP,
CMD_LINE_OPT_PCAP_FILENAME_CAP,
+ CMD_LINE_OPT_WORKER_MODEL_TYPE,
};
static const struct option lgopts[] = {
@@ -460,6 +498,7 @@ static const struct option lgopts[] = {
{CMD_LINE_OPT_PCAP_ENABLE, 0, 0, CMD_LINE_OPT_PARSE_PCAP_ENABLE},
{CMD_LINE_OPT_NUM_PKT_CAP, 1, 0, CMD_LINE_OPT_PARSE_NUM_PKT_CAP},
{CMD_LINE_OPT_PCAP_FILENAME, 1, 0, CMD_LINE_OPT_PCAP_FILENAME_CAP},
+ {CMD_LINE_OPT_WORKER_MODEL, 1, 0, CMD_LINE_OPT_WORKER_MODEL_TYPE},
{NULL, 0, 0, 0},
};
@@ -551,6 +590,11 @@ parse_args(int argc, char **argv)
printf("Pcap file name: %s\n", pcap_filename);
break;
+ case CMD_LINE_OPT_WORKER_MODEL_TYPE:
+ printf("Use new worker model: %s\n", optarg);
+ parse_worker_model(optarg);
+ break;
+
default:
print_usage(prgname);
return -1;
@@ -726,15 +770,15 @@ print_stats(void)
static int
graph_main_loop(void *conf)
{
+ struct model_conf *mconf = conf;
struct lcore_conf *qconf;
struct rte_graph *graph;
uint32_t lcore_id;
- RTE_SET_USED(conf);
-
lcore_id = rte_lcore_id();
qconf = &lcore_conf[lcore_id];
graph = qconf->graph;
+ rte_graph_worker_model_set(mconf->model);
if (!graph) {
RTE_LOG(INFO, L3FWD_GRAPH, "Lcore %u has nothing to do\n",
@@ -788,6 +832,141 @@ config_port_max_pkt_len(struct rte_eth_conf *conf,
return 0;
}
+static void
+graph_config_mcore_dispatch(struct rte_graph_param graph_conf)
+{
+ uint16_t nb_patterns = graph_conf.nb_node_patterns;
+ int worker_count = rte_lcore_count() - 1;
+ int main_lcore_id = rte_get_main_lcore();
+ int worker_lcore = main_lcore_id;
+ rte_graph_t main_graph_id = 0;
+ struct rte_node *node_tmp;
+ struct lcore_conf *qconf;
+ struct rte_graph *graph;
+ rte_graph_t graph_id;
+ rte_graph_off_t off;
+ int n_rx_node = 0;
+ rte_node_t count;
+ int i, j;
+ int ret;
+
+ for (j = 0; j < nb_lcore_params; j++) {
+ qconf = &lcore_conf[lcore_params[j].lcore_id];
+ /* Add rx node patterns of all lcore */
+ for (i = 0; i < qconf->n_rx_queue; i++) {
+ char *node_name = qconf->rx_queue_list[i].node_name;
+
+ graph_conf.node_patterns[nb_patterns + n_rx_node + i] =
node_name;
+ n_rx_node++;
+ ret =
rte_graph_model_dispatch_lcore_affinity_set(node_name,
+
lcore_params[j].lcore_id);
+ if (ret == 0)
+ printf("Set node %s affinity to lcore %u\n",
node_name,
+ lcore_params[j].lcore_id);
+ }
+ }
+
+ graph_conf.nb_node_patterns = nb_patterns + n_rx_node;
+ graph_conf.socket_id = rte_lcore_to_socket_id(main_lcore_id);
+
+ qconf = &lcore_conf[main_lcore_id];
+ snprintf(qconf->name, sizeof(qconf->name), "worker_%u",
+ main_lcore_id);
+
+ /* create main graph */
+ main_graph_id = rte_graph_create(qconf->name, &graph_conf);
+ if (main_graph_id == RTE_GRAPH_ID_INVALID)
+ rte_exit(EXIT_FAILURE,
+ "rte_graph_create(): main_graph_id invalid for lcore
%u\n",
+ main_lcore_id);
+
+ qconf->graph_id = main_graph_id;
+ qconf->graph = rte_graph_lookup(qconf->name);
+ /* >8 End of graph initialization. */
+ if (!qconf->graph)
+ rte_exit(EXIT_FAILURE,
+ "rte_graph_lookup(): graph %s not found\n",
+ qconf->name);
+
+ graph = qconf->graph;
+ rte_graph_foreach_node(count, off, graph, node_tmp) {
+ worker_lcore = rte_get_next_lcore(worker_lcore, true, 1);
+
+ /* Need to set the node Lcore affinity before clone graph for
each lcore */
+ if (node_tmp->lcore_id == RTE_MAX_LCORE) {
+ ret =
rte_graph_model_dispatch_lcore_affinity_set(node_tmp->name,
+
worker_lcore);
+ if (ret == 0)
+ printf("Set node %s affinity to lcore %u\n",
+ node_tmp->name, worker_lcore);
+ }
+ }
+
+ worker_lcore = main_lcore_id;
+ for (i = 0; i < worker_count; i++) {
+ worker_lcore = rte_get_next_lcore(worker_lcore, true, 1);
+
+ qconf = &lcore_conf[worker_lcore];
+ snprintf(qconf->name, sizeof(qconf->name), "cloned-%u",
worker_lcore);
+ graph_id = rte_graph_clone(main_graph_id, qconf->name);
+ ret = rte_graph_model_dispatch_core_bind(graph_id,
worker_lcore);
+ if (ret == 0)
+ printf("bind graph %d to lcore %u\n", graph_id,
worker_lcore);
+
+ /* full cloned graph name */
+ snprintf(qconf->name, sizeof(qconf->name), "%s",
+ rte_graph_id_to_name(graph_id));
+ qconf->graph_id = graph_id;
+ qconf->graph = rte_graph_lookup(qconf->name);
+ if (!qconf->graph)
+ rte_exit(EXIT_FAILURE,
+ "Failed to lookup graph %s\n",
+ qconf->name);
+ continue;
+ }
+}
+
+static void
+graph_config_rtc(struct rte_graph_param graph_conf)
+{
+ uint16_t nb_patterns = graph_conf.nb_node_patterns;
+ struct lcore_conf *qconf;
+ rte_graph_t graph_id;
+ uint32_t lcore_id;
+ rte_edge_t i;
+
+ for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
+ if (rte_lcore_is_enabled(lcore_id) == 0)
+ continue;
+
+ qconf = &lcore_conf[lcore_id];
+ /* Skip graph creation if no source exists */
+ if (!qconf->n_rx_queue)
+ continue;
+ /* Add rx node patterns of this lcore */
+ for (i = 0; i < qconf->n_rx_queue; i++) {
+ graph_conf.node_patterns[nb_patterns + i] =
+ qconf->rx_queue_list[i].node_name;
+ }
+ graph_conf.nb_node_patterns = nb_patterns + i;
+ graph_conf.socket_id = rte_lcore_to_socket_id(lcore_id);
+ snprintf(qconf->name, sizeof(qconf->name), "worker_%u",
+ lcore_id);
+ graph_id = rte_graph_create(qconf->name, &graph_conf);
+ if (graph_id == RTE_GRAPH_ID_INVALID)
+ rte_exit(EXIT_FAILURE,
+ "rte_graph_create(): graph_id invalid for
lcore %u\n",
+ lcore_id);
+ qconf->graph_id = graph_id;
+ qconf->graph = rte_graph_lookup(qconf->name);
+ /* >8 End of graph initialization. */
+ if (!qconf->graph)
+ rte_exit(EXIT_FAILURE,
+ "rte_graph_lookup(): graph %s not found\n",
+ qconf->name);
+ }
+}
+
int
main(int argc, char **argv)
{
@@ -808,10 +987,12 @@ main(int argc, char **argv)
uint16_t queueid, portid, i;
const char **node_patterns;
struct lcore_conf *qconf;
+ struct model_conf mconf;
uint16_t nb_graphs = 0;
uint16_t nb_patterns;
uint8_t rewrite_len;
uint32_t lcore_id;
+ uint16_t model;
int ret;
/* Init EAL */
@@ -840,6 +1021,9 @@ main(int argc, char **argv)
if (check_lcore_params() < 0)
rte_exit(EXIT_FAILURE, "check_lcore_params() failed\n");
+ if (check_worker_model_params() < 0)
+ rte_exit(EXIT_FAILURE, "check_worker_model_params() failed\n");
+
ret = init_lcore_rx_queues();
if (ret < 0)
rte_exit(EXIT_FAILURE, "init_lcore_rx_queues() failed\n");
@@ -1079,51 +1263,18 @@ main(int argc, char **argv)
memset(&graph_conf, 0, sizeof(graph_conf));
graph_conf.node_patterns = node_patterns;
+ graph_conf.nb_node_patterns = nb_patterns;
/* Pcap config */
graph_conf.pcap_enable = pcap_trace_enable;
graph_conf.num_pkt_to_capture = packet_to_capture;
graph_conf.pcap_filename = pcap_filename;
- for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
- rte_graph_t graph_id;
- rte_edge_t i;
-
- if (rte_lcore_is_enabled(lcore_id) == 0)
- continue;
-
- qconf = &lcore_conf[lcore_id];
-
- /* Skip graph creation if no source exists */
- if (!qconf->n_rx_queue)
- continue;
-
- /* Add rx node patterns of this lcore */
- for (i = 0; i < qconf->n_rx_queue; i++) {
- graph_conf.node_patterns[nb_patterns + i] =
- qconf->rx_queue_list[i].node_name;
- }
-
- graph_conf.nb_node_patterns = nb_patterns + i;
- graph_conf.socket_id = rte_lcore_to_socket_id(lcore_id);
-
- snprintf(qconf->name, sizeof(qconf->name), "worker_%u",
- lcore_id);
-
- graph_id = rte_graph_create(qconf->name, &graph_conf);
- if (graph_id == RTE_GRAPH_ID_INVALID)
- rte_exit(EXIT_FAILURE,
- "rte_graph_create(): graph_id invalid"
- " for lcore %u\n", lcore_id);
-
- qconf->graph_id = graph_id;
- qconf->graph = rte_graph_lookup(qconf->name);
- /* >8 End of graph initialization. */
- if (!qconf->graph)
- rte_exit(EXIT_FAILURE,
- "rte_graph_lookup(): graph %s not found\n",
- qconf->name);
- }
+ model = rte_graph_worker_model_get();
+ if (model == RTE_GRAPH_MODEL_MCORE_DISPATCH)
+ graph_config_mcore_dispatch(graph_conf);
+ else
+ graph_config_rtc(graph_conf);
memset(&rewrite_data, 0, sizeof(rewrite_data));
rewrite_len = sizeof(rewrite_data);
@@ -1174,8 +1325,10 @@ main(int argc, char **argv)
}
/* >8 End of adding route to ip4 graph infa. */
+ mconf.model = model;
/* Launch per-lcore init on every worker lcore */
- rte_eal_mp_remote_launch(graph_main_loop, NULL, SKIP_MAIN);
+ rte_eal_mp_remote_launch(graph_main_loop, &mconf,
+ SKIP_MAIN);
/* Accumulate and print stats on main until exit */
if (rte_graph_has_stats_feature())
--
2.37.2
