Hmm. We seem to be miscommunicating. My proposal is to implement your
proposal via outputFolderMap and some default mappings in flex-config.xml.
-Alex
On 6/2/17, 9:06 AM, "Josh Tynjala" <joshtynj...@gmail.com> wrote:
>Oh, I didn't realize that you wanted to add -outputFolderMap in addition
>to
>my proposal. That sounds good to me!
>
>- Josh
>
>On Fri, Jun 2, 2017 at 9:03 AM, Alex Harui <aha...@adobe.com.invalid>
>wrote:
>
>> Agreed. So I think with the defaults I propose we will implement what
>>you
>> propose and I can tweak it for my needs?
>>
>> -Alex
>>
>> On 6/2/17, 8:55 AM, "Josh Tynjala" <joshtynj...@gmail.com> wrote:
>>
>> >That's a perfectly valid solution for some people. I prefer to work
>>with
>> >unmodified SDKs so that I don't accidentally release any projects that
>> >break for other people because their SDKs are not modified like mine.
>> >
>> >- Josh
>> >
>> >On Fri, Jun 2, 2017 at 8:42 AM, Alex Harui <aha...@adobe.com.invalid>
>> >wrote:
>> >
>> >> I would modify my flex-config.xml, so I don't have to modify every
>> >>project.
>> >>
>> >> -Alex
>> >>
>> >> On 6/2/17, 8:38 AM, "Josh Tynjala" <joshtynj...@gmail.com> wrote:
>> >>
>> >> >If I need to set an option, then I might as well set -output or
>> >> >-js-output.
>> >> >I simply wouldn't use -outputFolderMap.
>> >> >
>> >> >- Josh
>> >> >
>> >> >On Fri, Jun 2, 2017 at 8:25 AM, Alex Harui
>><aha...@adobe.com.invalid>
>> >> >wrote:
>> >> >
>> >> >> OK, sorry, I did miss that. I thought you were the one who wanted
>> >>the
>> >> >> output in the same folder, but I was mistaken.
>> >> >>
>> >> >> Keep in mind that:
>> >> >>
>> >> >> 1) The SWF compiler (MXMLC for both the regular Flex SDK and
>>FlexJS)
>> >> >> defaults to putting the output in the same folder. So, if you
>>have:
>> >> >>
>> >> >> /projects/SomeProject/SomeProject.mxml
>> >> >>
>> >> >> By default, the SWF is:
>> >> >>
>> >> >> /projects/SomeProject/SomeProject.swf
>> >> >>
>> >> >> 2) I have another folder of projects that don't have src folders
>>at
>> >>all.
>> >> >> So before November 2016, when the default was as you propose it
>>to be
>> >> >> again, the problem was this. If I have two projects:
>> >> >>
>> >> >> /projects/SomeProject/SomeProject.mxml
>> >> >> /projects/SomeOtherProject/SomeOtherProject/mxml
>> >> >>
>> >> >> Compiling one overwrites the bin folder of the other in
>>projects/bin.
>> >> >>
>> >> >>
>> >> >> IMO, there is "no right answer", so I now think that we should
>>add a
>> >> >> configuration option like:
>> >> >>
>> >> >> -outputFolderMap=src/main/flex,bin
>> >> >> -outputFolderMap+=.,../bin
>> >> >>
>> >> >> Then folks can configure defaults any way they want. The "." is
>>the
>> >> >> special case for no matches with other patterns. You have
>>proposed
>> >>the
>> >> >> default to be
>> >> >>
>> >> >>
>> >> >> -outputFolderMap+=.,../bin
>> >> >>
>> >> >>
>> >> >> It is currently:
>> >> >>
>> >> >> -outputFolderMap+=.,bin
>> >> >>
>> >> >>
>> >> >> AIUI, Maven actually specifies the equivalent of:
>> >> >>
>> >> >> -outputFolderMap=src/main/flex,target
>> >> >>
>> >> >> So folks who want to leverage that somehow could do so.
>> >> >>
>> >> >>
>> >> >> Thoughts?
>> >> >> -Alex
>> >> >>
>> >> >>
>> >> >> On 6/2/17, 7:33 AM, "Josh Tynjala" <joshtynj...@gmail.com> wrote:
>> >> >>
>> >> >> >You seem to be missing the most important part of my proposal.
>>The
>> >> >> >compiler
>> >> >> >will put the "bin" directory in the parent of the main source
>> >>folder,
>> >> >> >regardless of whether it's named "src", "source", "alex-is-cool"
>>or
>> >> >>*any*
>> >> >> >name whatsoever. I put some pseudo-code to explain that in one
>>of my
>> >> >> >emails, but I guess you missed it. That's the main proposal. In
>> >> >>addition
>> >> >> >to
>> >> >> >that, "src/main/flex" would still be a special exception because
>> >>it's a
>> >> >> >more complex nested structure (otherwise, you'd get
>> >>"src/main/bin"). I
>> >> >> >hope
>> >> >> >that makes it clear!
>> >> >> >
>> >> >> >- Josh
>> >> >> >
>> >> >> >On Thu, Jun 1, 2017 at 10:39 PM, Alex Harui
>> >><aha...@adobe.com.invalid>
>> >> >> >wrote:
>> >> >> >
>> >> >> >> Maybe I don't understand your proposal. Currently I think you
>>can
>> >> >>say
>> >> >> >> that there are exceptions for "src" and "src/main/flex". AIUI,
>> >>your
>> >> >> >> proposal is that only "src/main/flex" would be handled
>> >>differently.
>> >> >> >>
>> >> >> >> -Alex
>> >> >> >>
>> >> >> >> On 6/1/17, 12:13 PM, "Josh Tynjala" <joshtynj...@gmail.com>
>> wrote:
>> >> >> >>
>> >> >> >> >Why would you need to stop and reconfigure all of those
>>projects?
>> >> >>With
>> >> >> >>the
>> >> >> >> >change that I suggested, all of your projects that use "src"
>> >>would
>> >> >> >> >continue
>> >> >> >> >to work just fine with no changes required.
>> >> >> >> >
>> >> >> >> >Yes, I'm perfectly happy making any changes after this
>>release.
>> >> >> >> >
>> >> >> >> >- Josh
>> >> >> >> >
>> >> >> >> >On Thu, Jun 1, 2017 at 12:05 PM, Alex Harui
>> >> >><aha...@adobe.com.invalid>
>> >> >> >> >wrote:
>> >> >> >> >
>> >> >> >> >> Believe me, I am not worried about perfection here.
>> >> >> >> >>
>> >> >> >> >> I am saying that if we make changes, we should allow the
>>set of
>> >> >> >>patterns
>> >> >> >> >> to be configurable so we don't have to change the compiler
>>to
>> >>add
>> >> >>new
>> >> >> >> >> patterns. I already have a large set of projects with only
>> >>"src"
>> >> >> >>and I
>> >> >> >> >> would prefer not to have to stop and reconfigure all of
>>those
>> >> >> >>projects.
>> >> >> >> >> When I have to debug into the compiling of a Flash Builder
>> >> >>project,
>> >> >> >>it
>> >> >> >> >> will save me time to not have to remember to add the output
>> >> >>folder.
>> >> >> >> >>
>> >> >> >> >> Having a config option would allow you to have what you want
>> >>and
>> >> >>for
>> >> >> >>me
>> >> >> >> >>to
>> >> >> >> >> have what I want. Can we agree to add a config option, but
>> >>maybe
>> >> >> >>after
>> >> >> >> >> this release?
>> >> >> >> >>
>> >> >> >> >> Thanks,
>> >> >> >> >> -Alex
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> On 6/1/17, 11:51 AM, "Josh Tynjala" <joshtynj...@gmail.com>
>> >> wrote:
>> >> >> >> >>
>> >> >> >> >> >If there are other nested source directory structures
>> >> >>recommended as
>> >> >> >> >> >standard practice by opinionated tools, similar to how
>>Maven
>> >>use
>> >> >> >> >> >"src/main/flex", then sure, let's add them as we become
>>aware
>> >>of
>> >> >> >>them.
>> >> >> >> >> >
>> >> >> >> >> >"srcx/main/flex" would indeed not be solved by my
>>recommended
>> >> >> >>change.
>> >> >> >> >> >However, "source", "srcx", or "whatever-i-want-to-call-it"
>> >>would
>> >> >> >>all be
>> >> >> >> >> >solved, and I think a single directory with a different
>>name
>> >>than
>> >> >> >> >>"src" is
>> >> >> >> >> >vastly more common than another nested directory structure
>> >>like
>> >> >> >> >> >"srcx/main/flex". At least from my experience looking at
>>real
>> >> >>world
>> >> >> >> >> >projects over the years. Let's not let perfection stop us
>>from
>> >> >> >>making
>> >> >> >> >>an
>> >> >> >> >> >improvement that will reduce the time users spend on
>>figuring
>> >>out
>> >> >> >>why
>> >> >> >> >> >something isn't working as expected and contributors spend
>> >> >> >>explaining
>> >> >> >> >>why
>> >> >> >> >> >"src" is a special case when it doesn't need to be.
>> >> >> >> >> >
>> >> >> >> >> >- Josh
>> >> >> >> >> >
>> >> >> >> >> >On Thu, Jun 1, 2017 at 11:11 AM, Alex Harui
>> >> >> >><aha...@adobe.com.invalid>
>> >> >> >> >> >wrote:
>> >> >> >> >> >
>> >> >> >> >> >> If we allow one exception, why not more than one?
>> >> >> >> >> >>
>> >> >> >> >> >> What if we add an "outputFolderExceptions" list and
>>default
>> >>it
>> >> >>to
>> >> >> >> >>just
>> >> >> >> >> >> contain "src/main/flex". Then I could add "src" in my
>>SDK
>> >> >> >>installs
>> >> >> >> >>to
>> >> >> >> >> >>get
>> >> >> >> >> >> what I want. Still not sure how it solves the original
>> >>problem
>> >> >> >> >>though.
>> >> >> >> >> >> If someone has a src/main/flex pattern and changes it to
>> >> >> >> >>srcx/main/flex
>> >> >> >> >> >> seems like they will still be surprised.
>> >> >> >> >> >>
>> >> >> >> >> >> -Alex
>> >> >> >> >> >>
>> >> >> >> >> >> On 6/1/17, 10:39 AM, "Josh Tynjala"
>><joshtynj...@gmail.com>
>> >> >> wrote:
>> >> >> >> >> >>
>> >> >> >> >> >> >If we do as I suggest, there would no longer be a list
>>of
>> >> >> >>patterns.
>> >> >> >> >>I
>> >> >> >> >> >>want
>> >> >> >> >> >> >to allow *any* folder name. That's what I mean by
>> >> >>generalizing.
>> >> >> >>Just
>> >> >> >> >> >> >automatically put the "bin" directory relative to the
>> >>parent
>> >> >> >> >>directory
>> >> >> >> >> >>of
>> >> >> >> >> >> >the main source file. (with one exception: Maven-style
>> >>project
>> >> >> >> >> >>structures
>> >> >> >> >> >> >with src/main/flex would still be a special case).
>> >> >> >> >> >> >
>> >> >> >> >> >> >Right now, if you compile like this...
>> >> >> >> >> >> >
>> >> >> >> >> >> >mxmlc src/MyProject.mxml
>> >> >> >> >> >> >
>> >> >> >> >> >> >...you get a "bin" directory in the same parent
>>directory
>> >>as
>> >> >> >>"src".
>> >> >> >> >> >> >
>> >> >> >> >> >> >I want to allow you to use ANY name instead of "src"
>>too,
>> >>like
>> >> >> >>this:
>> >> >> >> >> >> >
>> >> >> >> >> >> >mxmlc source/MyProject.mxml
>> >> >> >> >> >> >mxmlc whatever-i-want-to-call-it/MyProject.mxml
>> >> >> >> >> >> >
>> >> >> >> >> >> >... and still get a "bin" directory relative to
>>"source" or
>> >> >> >> >> >> >"whatever-i-want-to-call-it". Replace "source" or
>> >> >> >> >> >> >"whatever-i-want-to-call-it" with *any* folder name at
>> >>random,
>> >> >> >>and I
>> >> >> >> >> >>want
>> >> >> >> >> >> >it to just work.
>> >> >> >> >> >> >
>> >> >> >> >> >> >The compiler would do something similar to this
>> >>pseudo-code:
>> >> >> >> >> >> >
>> >> >> >> >> >> >File mainClass = new
>> >> >> >> >> >>
>> >> >> >> >>>File("/path/to/MyProject/whatever-i-want-to-call-it/
>> >> >> MyProject.mxml");
>> >> >> >> >> >> >File bin =
>> >>mainClass.getParent().getParent().resolve("bin");
>> >> >> >> >> >> >
>> >> >> >> >> >> >You'd get /path/to/MyProject/bin/
>> >> >> >> >> >> >
>> >> >> >> >> >> >- Josh
>> >> >> >> >> >> >
>> >> >> >> >> >> >
>> >> >> >> >> >> >On Thu, Jun 1, 2017 at 10:18 AM, Alex Harui
>> >> >> >> >><aha...@adobe.com.invalid>
>> >> >> >> >> >> >wrote:
>> >> >> >> >> >> >
>> >> >> >> >> >> >> I just want to optimize for a couple of common cases
>>in
>> >> >>order
>> >> >> >>to
>> >> >> >> >> >>save me
>> >> >> >> >> >> >> and maybe other folks some time. If for some reason I
>> >>need
>> >> >>to
>> >> >> >> >> >>compile a
>> >> >> >> >> >> >> Flash Builder project from the command-line or Ant or
>> >>Java
>> >> >> >> >>debugger,
>> >> >> >> >> >>I
>> >> >> >> >> >> >> don't have to remember to set the -output parameter.
>> >> >> >> >> >> >>
>> >> >> >> >> >> >> I used to get FB projects in JIRA and email and then
>> >>unpack
>> >> >> >>them
>> >> >> >> >>and
>> >> >> >> >> >> >> compile them outside of FB because then I can get the
>> >> >>debugger
>> >> >> >>on
>> >> >> >> >> >>them
>> >> >> >> >> >> >> more easily. All of our examples are set up so you
>>can
>> >> >>compile
>> >> >> >> >>them
>> >> >> >> >> >> >>from
>> >> >> >> >> >> >> the command line and not have to type the -output
>> >>parameter.
>> >> >> >>And
>> >> >> >> >>if
>> >> >> >> >> >>you
>> >> >> >> >> >> >> make a mistake typing the output folder name, it ends
>>up
>> >> >> >>creating
>> >> >> >> >>a
>> >> >> >> >> >>new
>> >> >> >> >> >> >> folder with that name.
>> >> >> >> >> >> >>
>> >> >> >> >> >> >> I'm not sure what you mean by generalizing. Are you
>> >> >>suggesting
>> >> >> >> >> >>allowing
>> >> >> >> >> >> >> folks to add more patterns to the set of folders where
>> >>the
>> >> >> >> >>compiler
>> >> >> >> >> >>will
>> >> >> >> >> >> >> chose the parent of the folder pattern? I'm not sure
>>how
>> >> >>that
>> >> >> >> >>solves
>> >> >> >> >> >> >>the
>> >> >> >> >> >> >> problem. Seems like you'd still be surprised if you
>>use
>> >> >> >>"source"
>> >> >> >> >>or
>> >> >> >> >> >> >> something that isn't in the default list so a warning
>> >>would
>> >> >> >>still
>> >> >> >> >> >>help,
>> >> >> >> >> >> >> but if that's what you want to do, seems like it
>>wouldn't
>> >> >>hurt.
>> >> >> >> >> >> >>
>> >> >> >> >> >> >> My 2 cents,
>> >> >> >> >> >> >> -Alex
>> >> >> >> >> >> >>
>> >> >> >> >> >> >>
>> >> >> >> >> >> >> On 6/1/17, 9:59 AM, "Josh Tynjala"
>> >><joshtynj...@gmail.com>
>> >> >> >>wrote:
>> >> >> >> >> >> >>
>> >> >> >> >> >> >> >I'm not sure that I understand why you mentioned
>> >>changing
>> >> >> >>Flash
>> >> >> >> >> >> >>Builder's
>> >> >> >> >> >> >> >default source path. That seems mostly tangential
>>here.
>> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >I'm saying that the compiler shouldn't care whether
>>it's
>> >> >>named
>> >> >> >> >> >>"src",
>> >> >> >> >> >> >> >"source", or "whatever-i-want-to-call-it". It should
>> >>simply
>> >> >> >> >>default
>> >> >> >> >> >>to
>> >> >> >> >> >> >> >putting "bin" in the parent of that folder. A warning
>> >>might
>> >> >> >>be a
>> >> >> >> >> >>good
>> >> >> >> >> >> >> >temporary workaround, but generalizing this behavior
>>is
>> >> >> >> >> >>significantly
>> >> >> >> >> >> >> >better, in my opinion.
>> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >- Josh
>> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >On Thu, Jun 1, 2017 at 9:26 AM, Alex Harui
>> >> >> >> >> >><aha...@adobe.com.invalid>
>> >> >> >> >> >> >> >wrote:
>> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> I think "src" is for Flash Builder. I don't know
>> >>what it
>> >> >> >>would
>> >> >> >> >> >>take
>> >> >> >> >> >> >>to
>> >> >> >> >> >> >> >> get FB to default to something else. I know I have
>> >>lots
>> >> >>of
>> >> >> >> >> >>projects
>> >> >> >> >> >> >> >>with
>> >> >> >> >> >> >> >> just a "src" folder.
>> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> I agree it is confusing. We could output a
>>warning or
>> >> >> >>error if
>> >> >> >> >> >>you
>> >> >> >> >> >> >> >> haven't specified -output, -js-output and don't
>>have
>> >> >>"src"
>> >> >> >>or
>> >> >> >> >> >> >> >> "src/main/flex" folders. Something like "Warning:
>> >>output
>> >> >> >> >>folder
>> >> >> >> >> >>not
>> >> >> >> >> >> >> >> specified and src or src/main/flex folders not
>> >>specified.
>> >> >> >> >>Output
>> >> >> >> >> >> >>will
>> >> >> >> >> >> >> >>be
>> >> >> >> >> >> >> >> in <name of output folder".
>> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> Would that help eliminate confusion? That's easy
>>for
>> >> >> >>someone
>> >> >> >> >>to
>> >> >> >> >> >>add
>> >> >> >> >> >> >>to
>> >> >> >> >> >> >> >> MXMLFlexJSPublisher.java.
>> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> Thoughts?
>> >> >> >> >> >> >> >> -Alex
>> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> On 6/1/17, 8:52 AM, "Josh Tynjala"
>> >> >><joshtynj...@gmail.com>
>> >> >> >> >>wrote:
>> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >I think I had some trouble trying to get -output
>>to
>> >> >>accept
>> >> >> >>a
>> >> >> >> >> >> >>directory
>> >> >> >> >> >> >> >>for
>> >> >> >> >> >> >> >> >a JS-only project, and that's when I figured out
>>that
>> >> >> >> >>-js-output
>> >> >> >> >> >> >> >>exists.
>> >> >> >> >> >> >> >> >Maybe I was doing something wrong at the time. Or
>> >>maybe
>> >> >>it
>> >> >> >> >>didn't
>> >> >> >> >> >> >>quite
>> >> >> >> >> >> >> >> >work properly yet.
>> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >Although, I still think it's confusing to those
>>who
>> >> >>don't
>> >> >> >> >>realize
>> >> >> >> >> >> >>that
>> >> >> >> >> >> >> >> >"src" and "src/main/flex" get special treatment
>>and
>> >>then
>> >> >> >>"bin"
>> >> >> >> >> >>ends
>> >> >> >> >> >> >>up
>> >> >> >> >> >> >> >> >somewhere else if they happen to choose a
>>different
>> >>name
>> >> >> >>for a
>> >> >> >> >> >>new
>> >> >> >> >> >> >> >> >project.
>> >> >> >> >> >> >> >> >Between me and Santanu, that's two people who had
>>to
>> >> >>waste
>> >> >> >> >>time
>> >> >> >> >> >>on
>> >> >> >> >> >> >> >> >figuring
>> >> >> >> >> >> >> >> >out why "bin" ended up somewhere we didn't
>>expect. I
>> >> >>could
>> >> >> >> >>live
>> >> >> >> >> >> >> >>without it
>> >> >> >> >> >> >> >> >being the current working directory if "bin" would
>> >> >>simply
>> >> >> >>go
>> >> >> >> >>into
>> >> >> >> >> >> >>the
>> >> >> >> >> >> >> >> >parent directory of the directory containing the
>>main
>> >> >> >>class by
>> >> >> >> >> >> >>default,
>> >> >> >> >> >> >> >> >regardless of whether it's named "src" or not. If
>> >> >> >> >> >>"src/main/flex" is
>> >> >> >> >> >> >> >>the
>> >> >> >> >> >> >> >> >only special case, that's better, in my opinion.
>> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >- Josh
>> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >On Thu, Jun 1, 2017 at 8:16 AM, Alex Harui
>> >> >> >> >> >> >><aha...@adobe.com.invalid>
>> >> >> >> >> >> >> >> >wrote:
>> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >> And if you just use -output and not -js-output
>>the
>> >>bin
>> >> >> >> >>folder
>> >> >> >> >> >> >>will be
>> >> >> >> >> >> >> >> >> where you specified -output, and if you specify
>> >> >> >> >> >> >> >> >> -output=somefolder\somefile.swf the output will
>>be
>> >>in
>> >> >> >> >> >> >> somefolder\bin.
>> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> The logic is trying to say:
>> >> >> >> >> >> >> >> >> 1) If you specify -output as a SWF, we will use
>>the
>> >> >> >>parent
>> >> >> >> >> >>folder
>> >> >> >> >> >> >>of
>> >> >> >> >> >> >> >>the
>> >> >> >> >> >> >> >> >> SWF
>> >> >> >> >> >> >> >> >> 2) If you specify -output as a folder, we will
>>use
>> >> >>that
>> >> >> >> >>folder
>> >> >> >> >> >> >> >> >> 3) If you specify -js-output, we will use that
>> >> >> >>regardless of
>> >> >> >> >> >>what
>> >> >> >> >> >> >>you
>> >> >> >> >> >> >> >> >>used
>> >> >> >> >> >> >> >> >> for -output
>> >> >> >> >> >> >> >> >> 4) If you didn't specify -output or -js-output
>>then
>> >> >> >> >> >> >> >> >> A) If you have a src folder or src/main/flex
>> >>folder
>> >> >>we
>> >> >> >> >>will
>> >> >> >> >> >>use
>> >> >> >> >> >> >>the
>> >> >> >> >> >> >> >> >> parent of src
>> >> >> >> >> >> >> >> >> B) Otherwise we will use the parent folder of
>>the
>> >> >>main
>> >> >> >> >>source
>> >> >> >> >> >> >>file.
>> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> I don't agree that CWD is the right default.
>>For
>> >>me,
>> >> >> >>I've
>> >> >> >> >> >>always
>> >> >> >> >> >> >> >>had a
>> >> >> >> >> >> >> >> >> folder full of test cases and am not always
>> >>changing
>> >> >> >> >>folders.
>> >> >> >> >> >>I
>> >> >> >> >> >> >> >>think
>> >> >> >> >> >> >> >> >>the
>> >> >> >> >> >> >> >> >> regular Flex MXMLC worked this way as well so I
>> >>didn't
>> >> >> >>want
>> >> >> >> >>to
>> >> >> >> >> >> >>change
>> >> >> >> >> >> >> >> >>that
>> >> >> >> >> >> >> >> >> pattern.
>> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> 4A is just a convenience for those who follow
>> >>certain
>> >> >> >>common
>> >> >> >> >> >> >> >>patterns so
>> >> >> >> >> >> >> >> >> they don't have to do as much typing on the
>>command
>> >> >>line.
>> >> >> >> >>It
>> >> >> >> >> >> >>might
>> >> >> >> >> >> >> >>also
>> >> >> >> >> >> >> >> >> "do the right thing" for Flash Builder users. I
>> >>think
>> >> >> >>Maven
>> >> >> >> >> >> >>always
>> >> >> >> >> >> >> >> >> specifies the output folder.
>> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> My 2 cents,
>> >> >> >> >> >> >> >> >> -Alex
>> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> On 6/1/17, 7:48 AM, "Josh Tynjala"
>> >> >> >><joshtynj...@gmail.com>
>> >> >> >> >> >>wrote:
>> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> >In that case, the SWF will use the -output
>>option:
>> >> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >> >mxmlc -output=path/to/MyProject.swf
>>-js-output=.
>> >> >> >> >> >> >>source/MyProject.as
>> >> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >> >- Josh
>> >> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >> >On Thu, Jun 1, 2017 at 7:30 AM, piotrz
>> >> >> >> >> >> >><piotrzarzyck...@gmail.com>
>> >> >> >> >> >> >> >> >>wrote:
>> >> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >> >> Ahh..Ok now it is clear. What about if we
>>have
>> >> >> >> >> >> >> >> >> >> -compiler.targets=JSFLEX,SWF -
>> >> >> >> >> >> >> >> >> >> So -js-output will be also the place where
>>SWF
>> >>file
>> >> >> >>will
>> >> >> >> >> >> >>landed?
>> >> >> >> >> >> >> >>- If
>> >> >> >> >> >> >> >> >> >>yes
>> >> >> >> >> >> >> >> >> >> in
>> >> >> >> >> >> >> >> >> >> that case this param could have different
>>name.
>> >> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> >> Thanks,
>> >> >> >> >> >> >> >> >> >> Piotr
>> >> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> >> -----
>> >> >> >> >> >> >> >> >> >> Apache Flex PMC
>> >> >> >> >> >> >> >> >> >> piotrzarzyck...@gmail.com
>> >> >> >> >> >> >> >> >> >> --
>> >> >> >> >> >> >> >> >> >> View this message in context:
>> >>http://apache-flex-
>> >> >> >> >> >> >> >> >> >>
>> >> >>development.2333347.n4.nabble.com/FlexJS-Why-FlexJS-
>> >> >> >> >> >> >> >> >> >>
>> >> >> >> >>compiler-statically-looks-for-src-folder-tp61991p61997.html
>> >> >> >> >> >> >> >> >> >> Sent from the Apache Flex Development mailing
>> >>list
>> >> >> >> >>archive
>> >> >> >> >> >>at
>> >> >> >> >> >> >> >> >> >>Nabble.com.
>> >> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >>
>> >> >> >> >> >> >>
>> >> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >>
>> >> >>
>> >>
>> >>
>>
>>
