This discussion thread has been quiet for some time. It looks most people think sticking to a strict voting process is a good idea.
In addition to that, there are a few related details that are also discussed, I listed them below and personally I am +1 on all of them. 1. Stick to the current definition of major changes. 2. Committers have binding votes on FLIPs. 3. In general FLIPs should be completed in a reasonable amount of time, rather than lasting for many releases. 4. Always discuss FLIPs based on FLIP wiki page. Google docs can be used as handy tools to explain ideas, but FLIP ideas should always be documented as a FLIP wiki, regardless whether they are accepted or not. 5. FLIPs should be immutable. Changes to FLIPs need a new vote processes. 6. FLIPs should be concrete in terms of interfaces, semantic and behaviors, rather than conceptual. It'll be good to hear what do people think. If there is no further objection, I'd suggest to conclude this discussion in 72 hours and move to a lazy majority voting. (For decisions like this, maybe only votes from PMCs should be considered as binding?) Thanks, Jiangjie (Becket) Qin On Fri, Jun 28, 2019 at 10:33 AM Congxian Qiu <qcx978132...@gmail.com> wrote: > Thanks a lot for bringing this up, Aljoscha. > > +1 for sticking to the "lazy majority" vote process. > > In my opinion, after the "lazy majority" vote process, we will have a > community consensus about the accepted FLIP. > > Best, > Congxian > > > Becket Qin <becket....@gmail.com> 于2019年6月28日周五 上午10:06写道: > > > Thanks a lot for bringing this up, Aljoscha. > > > > Big +1 to the following: > > > > 1. Stick to a strict FLIP voting process. > > In practice, I rarely see a FLIP with a voting thread. In fact, the > search > > in mail archive > > < > > > http://apache-flink-mailing-list-archive.1008284.n3.nabble.com/template/NamlServlet.jtp?macro=search_page&node=1&query=subject%3AVOTE%2CFLIP&days=0 > > > > > gives > > only 3 FLIPs with voting thread, and unfortunately none of them has met > the > > lazy majority requirements, which needs 3 binding votes. However, we have > > 11 adopted-but-unreleased FLIPs and 16 released FLIPs. > > Even though we claimed *"These proposals are more serious than code > changes > > and more serious even than release votes.", *we did not really treat them > > seriously. The missing voting process effectively put the efforts of FLIP > > in vain. This leads to a few consequences: > > a) The conclusion of the FLIP is never really finalized. People may > change > > the FLIP at wish during the implementation. > > b) Some "adopted" FLIPs only have conceptual ideas instead of necessary > > concrete interfaces, which leaves a lot of problems in the implementation > > phase. > > c) New contributors are completely confused on how to contribute. The > > voting threads seems died, and magically someone else's code got checked > in > > without a passed FLIP. These "good citizens" may feel excluded and simply > > leave the chaos. > > d) API changes / user sensible behavior changes may be checked in without > > being carefully inspected. To fix them, hacky tricks has to be made in > > order to keep backwards compatibility. > > > > So a huge +1 to stick to the FLIP voting process. > > > > 2. Stick to the definition of major changes. Generally speaking any user > > sensible changes should go through a FLIP. > > - Some changes may be small from the size of patch perspective, but > the > > impact could be huge. Take metric as an example, imagine a cloud service > > provider who relies on a metric to do alerting or bill their customer. > Any > > change to such metrics will have huge impact on them. > > - Sometimes there might be no "interface" change per se, but the > > behavior of a method is slightly changed. Even that can be very annoying > to > > some users. So I think any user sensible changes should go through a > FLIP. > > > > 3. Generally speaking, make each FLIP completable in a reasonable amount > of > > time. Some large changes may need multiple FLIPs. > > - I agree with David that a long lasting FLIP can be problematic as it > > could become obsolete before the work is done. And might need to make > > changes to the original proposal multiple times. It might be a little > > difficult to have a standard to say what kind of FLIP is a long lasting > > FLIP. > > - Sometimes long lasting FLIP may be necessary, e.g. a big new module > / > > functionality, etc. Those FLIPs are rare and usually more independent. We > > may need to treat them case by case. > > > > 4. Take the votes from both committers and PMCs as binding. > > > > > > In addition, I'd like to propose the following: > > > > 1. Always discuss the FLIP based on a FLIP wiki page instead of a Google > > doc. It is perfectly fine to use google doc to explain stuff, but the > FLIP > > wiki page is the official source for the proposal. The discussion and > vote > > needs to be based on that. > > > > According to the process of FLIP > > < > > > https://cwiki.apache.org/confluence/display/FLINK/Flink+Improvement+Proposals#FlinkImprovementProposals-Process > > >, > > one should create a FLIP wiki page "before" starting a discussion ML > > thread. The discussion is supposed to be happen in ML but based on the > FLIP > > wiki. This process has some benefits: > > a) Since all the FLIP proposals must give necessary information such > as > > public interface change / behavior change / migration plan and such, the > > authors are enforced to think about them. > > b) Even if a FLIP is finally rejected, we have all the history of it. > > These are valuable assets of the project and would give a good reference > > for later contributors. > > > > However, in practice, what people usually do is to have a Google doc for > > discussion and only create a FLIP wiki page after that idea is accepted > by > > the community. There might be a few caveats in this: > > a) The Google docs may be organized in various ways and something > important > > might be missing. This sometimes harms the review efficiency as people > > might have to ask some basic questions. > > b) More importantly, the rejected proposals will be silently lost without > > any history - later contributors will not be able to know what happened > > before, and there is no guarantee that the google docs will always be > > accessible. > > c) From process perspective, one may be confused on whether a discussion > > thread on the FLIP wiki is still needed if people have agreed on the > google > > doc. (At least I always feel a little awkward after the google doc has > been > > agreed upon) > > > > 2. The public interface change proposal should be concrete in each FLIP, > > instead of conceptual. This avoids surprises in the implementation phase. > > > > 3. Adopted FLIP should mostly be "immutable". Any change to an adopted > FLIP > > requires a new voting process. For minor changes, a Lazy Approval process > > can be applied, i.e. announce the change in the voting ML thread, get at > > least one binding +1. In case of any -1, a new lazy majority vote is > > required. > > > > As someone deeply involved in Kafka and KIP process design and > execution, I > > saw how critical it is to the healthiness of such projects keeping going > > through tons of changes. I believe that the FLIP process could play a > more > > effective role to organize major changes and improve the overall > > contribution efficiency, code quality / stability of Flink. To achieve > > that, we really have to take the FLIP process seriously, follow it by > > ourselves and mentor the community to do the same. > > > > Thanks, > > > > Jiangjie (Becket) Qin > > > > On Thu, Jun 27, 2019 at 10:28 PM Stephan Ewen <se...@apache.org> wrote: > > > > > +1 to re-think the FLIP process a bit. > > > > > > I think more explicit approval is certainly a good idea. > > > Who can vote on FLIPs is a question to be answered, though. I think > PMCs > > > only would be a bit too strict. > > > > > > On Thu, Jun 27, 2019 at 11:38 AM Hequn Cheng <chenghe...@gmail.com> > > wrote: > > > > > > > Hi all, > > > > > > > > Thanks for raising the nice discussion @Aljoscha. > > > > > > > > +1 to sticking to the "lazy majority" voting process. > > > > It is good to get more people involved in the design discussion and > get > > > > enough binding votes. > > > > > > > > As for the scope of the FLIP, previous replies show a lot of good > > > thoughts. > > > > On the other hand, I think we can also define some scope that which > > > should > > > > *not* be a FLIP. > > > > Sometimes it is easier for us to list a blacklist. > > > > > > > > Best, Hequn > > > > > > > > On Thu, Jun 27, 2019 at 5:27 PM Biao Liu <mmyy1...@gmail.com> wrote: > > > > > > > > > Hi community, > > > > > > > > > > Thanks Aljoscha for bringing us this discussion. > > > > > > > > > > As Aljoscha said, "lazy majority" is always the voting rule of > FLIP. > > It > > > > > seems that people just ignored or didn't realized this rule. > > > > > My concern is that what we can do to make sure developers will obey > > the > > > > > rules. > > > > > I think Kurt has given a good suggestion. Since the community is > > > growing > > > > > bigger and bigger, maybe we need some volunteers to host the > progress > > > of > > > > > FLIP. Like start a discussion/voting in ML or update the sheet of > > FLIP > > > > > document [1]. > > > > > > > > > > 1. > > > > > > > > > > > > > > > > > > > > https://cwiki.apache.org/confluence/display/FLINK/Flink+Improvement+Proposals > > > > > > > > > > > > > > > > > > > > Dawid Wysakowicz <dwysakow...@apache.org> 于2019年6月27日周四 下午2:56写道: > > > > > > > > > > > Hi all, > > > > > > > > > > > > I do very much agree with the statement from Aljosha's initial > > > message, > > > > > > which is currently also expressed in the description page of a > > FLIP. > > > > > > > > > > > > These will stick around for quite a while after they’re > implemented > > > and > > > > > the PMC (and the committers) has the burden of maintaining them. I > > > think > > > > > that therefore FLIP votes are even move important than release > votes, > > > > > because they steer the long time direction of Flink. > > > > > > > > > > > > > > > > > > Therefore I think we should enforce following the lazy majority > > > > approach. > > > > > > I will probably just repeat what was already said, but I do think > > > this > > > > > > would make the decisions more visible, easier to reference in > case > > of > > > > > > related decisions, and also this would show if the community has > > > > capacity > > > > > > to implement the FLIP. Nowadays, even if a FLIP is "accepted" it > > > might > > > > be > > > > > > just stale because there are no committers that have the capacity > > to > > > > help > > > > > > with the changes. > > > > > > > > > > > > Another, maybe an orthogonal issue, is that we could maybe use > this > > > > > > process for agreeing on a scope of a release. I think it might > make > > > > sense > > > > > > to construct a release plan of an accepted FLIPs. This would > > enforce > > > > > better > > > > > > scoping of FLIPs, as they would have to fit into a single > release. > > In > > > > my > > > > > > opinion FLIPs that spawn multiple releases(thus even over > multiple > > > > years) > > > > > > are rarely relevant in the future anymore, as the project evolves > > and > > > > it > > > > > > usually makes sense to revisit the original proposal anyway. This > > > would > > > > > > have the benefits that: > > > > > > > > > > > > - we have a clear scope for a release rather than just a vague > > > list > > > > of > > > > > > features that we want to have. > > > > > > - the whole community is on the same page what a certain > feature > > > > means > > > > > > - the scope does not change drastically during the development > > > > period > > > > > > > > > > > > As for what should and what should not deserve a FLIP, I actually > > > quite > > > > > > like the definition in the FLIPs page[1]. I think it does make > > sense > > > to > > > > > > have a FLIP, and as a result a voting process, for any *public* > or > > > > major > > > > > > change. I agree with Gordon. Even if the change is trivial it > might > > > > > affect > > > > > > external systems/users and it is also a commitment from the > > > community. > > > > > > Therefore I think they deserve a vote. > > > > > > > > > > > > Lastly, I think Jark raised a valid point. We should have a clear > > > > > > understanding what binding votes in this case mean. I think it > > makes > > > > > sense > > > > > > to consider PMC's and committers' votes as binding for FLIPs > > voting. > > > > > > Otherwise we would lose the aspect of committing to help with > > getting > > > > the > > > > > > FLIP into the codebase. > > > > > > > > > > > > To sum up I would opt for enforcing the lazy majority. I would > > > suggest > > > > to > > > > > > consider constructing a release plan with a list of accepted > FLIPs. > > > > > > > > > > > > Best, > > > > > > > > > > > > Dawid > > > > > > > > > > > > > > > > > > [1] > > > > > > > > > > > > > > > > > > > > > https://cwiki.apache.org/confluence/display/FLINK/Flink+Improvement+Proposals#FlinkImprovementProposals-Whatisconsidereda%22majorchange%22thatneedsaFLIP > > > > > > ? > > > > > > On 27/06/2019 04:15, Jark Wu wrote: > > > > > > > > > > > > +1 for sticking to the lazy majority voting. > > > > > > > > > > > > A question from my side, the 3+1 votes are binding votes which > only > > > > > active > > > > > > (i.e. non-emeritus) committers and PMC members have? > > > > > > > > > > > > > > > > > > Best, > > > > > > Jark > > > > > > > > > > > > > > > > > > On Wed, 26 Jun 2019 at 19:07, Tzu-Li (Gordon) Tai < > > > tzuli...@apache.org > > > > > > > > > > <tzuli...@apache.org> > > > > > > wrote: > > > > > > > > > > > > > > > > > > +1 to enforcing lazy majority voting for future FLIPs, starting > > from > > > > > FLIPs > > > > > > that are still currently under discussion (by the time we've > agreed > > > on > > > > > the > > > > > > FLIP voting process). > > > > > > > > > > > > My two cents concerning "what should and shouldn't be a FLIP": > > > > > > > > > > > > I can understand Chesnay's argument about how some FLIPs, while > > > meeting > > > > > the > > > > > > criteria defined by the FLIP guidelines, feel to not be > > sufficiently > > > > > large > > > > > > to justify a FLIP. > > > > > > As a matter of fact, the FLIP guidelines explicitly mention that > > > > "Exposed > > > > > > Monitoring Information" is considered public interface; I guess > > that > > > > was > > > > > > why this FLIP came around in the first place. > > > > > > I was also hesitant in whether or not the recent FLIP about keyed > > > state > > > > > > snapshot binary format unification (FLIP-41) deserves to be a > FLIP, > > > > since > > > > > > the complexity of the change is rather small. > > > > > > > > > > > > However, with the fact that these changes indeed touch the > general > > > > public > > > > > > interface of Flink, the scope (including all potential 3rd party > > > > > projects) > > > > > > is strictly speaking hard to define. > > > > > > Outcomes of such changes, even if the complexity of the change is > > > > rather > > > > > > trivial, can still stick around for quite a while. > > > > > > In this case, IMO the value of proposing a FLIP for such a change > > is > > > > less > > > > > > about discussing design or implementation details, and more on > the > > > fact > > > > > > that said change requires an official vote for approval from the > > > > > community. > > > > > > > > > > > > Best, > > > > > > Gordon > > > > > > > > > > > > On Wed, Jun 26, 2019 at 5:50 PM Chesnay Schepler < > > ches...@apache.org > > > > > > > > < > > > > > ches...@apache.org> > > > > > > wrote: > > > > > > > > > > > > > > > > > > The FLIP guidelines disagree with your first point. > > > > > > > > > > > > The guidelines are a bit contradictory as at some places we say > > that > > > > > > FLIPs are for major features, and in other places say they are > for > > > any > > > > > > changes to the public API. > > > > > > This very point came up in the recent FLIP about standardizing > > > metrics. > > > > > > Metrics are somewhat part of the public API, and thus you can > > > interpret > > > > > > the guidelines to say that you need a FLIP. But in terms of > scope, > > I > > > > > > believed it to not be sufficiently large to justify a FLIP. > > > > > > > > > > > > Overall I'm very much in favor of sticking to the lazy majority > > > voting > > > > > > scheme and enforcing it, > > > > > > but I do think we have to reevaluate what changes require a FLIP > > and > > > > > > which don't. > > > > > > > > > > > > On 26/06/2019 11:37, Aljoscha Krettek wrote: > > > > > > > > > > > > Hi All, > > > > > > > > > > > > When we originally introduced the FLIP process (which is based on > > the > > > > > > > > > > > > KIP process from Kafka and refers to the Kafka bylaws for how > votes > > > > work) > > > > > > voting was set to be “lazy majority”. This means that a FLIP vote > > > > > > > > > > > > "requires > > > > > > > > > > > > 3 binding +1 votes and more binding +1 votes than -1 votes” > [1][2]. > > > > > > Currently, we treat FLIP votes more like “lazy Approval”, i.e. if > > > there > > > > > > > > > > > > are > > > > > > > > > > > > no -1 votes FLIP are often accepted, if there is a VOTE thread at > > > all. > > > > > > > > > > > > I propose that we stick to the original process or update our > FLIP > > > > > > > > > > > > document to a voting scheme that we agree on. I’m in favour of > > > sticking > > > > > > with “lazy majority”, for these reasons: > > > > > > > > > > > > 1. FLIPs should typically be used for deeper changes of Flink. > > These > > > > > > > > > > > > will stick around for quite a while after they’re implemented and > > the > > > > PMC > > > > > > (and the committers) has the burden of maintaining them. I think > > that > > > > > > therefore FLIP votes are even move important than release votes, > > > > because > > > > > > they steer the long time direction of Flink. > > > > > > > > > > > > 2. Requiring at least 3 +1 votes means that there is more work > > needed > > > > > > > > > > > > for getting a FLIP accepted. I think this is a good thing because > > it > > > > will > > > > > > require people to be more involved in the direction of the > project. > > > And > > > > > > > > > > > > if > > > > > > > > > > > > there are not enough +1 votes on a FLIP, this is a signal that > > there > > > is > > > > > > > > > > > > not > > > > > > > > > > > > enough interest in the feature or that there is not enough > > bandwidth > > > > for > > > > > > working on a feature. > > > > > > > > > > > > 3. This is more an “optics” thing, but I think having clear rules > > and > > > > > > > > > > > > sticking to them makes it easier for an international community > > (like > > > > the > > > > > > Apache Flink community) to work together and collaborate. If > there > > is > > > > > > preferential treatment for certain parts of the community that > > makes > > > it > > > > > > hard for other parts to participate and get into the community > and > > > > > > understand the workings of it. > > > > > > > > > > > > As a side note, I like the FLIP process because they are a place > > > where > > > > > > > > > > > > we can keep track of important decisions and they are a place > that > > we > > > > can > > > > > > point to when there is uncertainty about a certain feature in the > > > > future. > > > > > > For example FLIP-28 [3] (which is now discarded) would be a place > > > where > > > > > > > > > > > > we > > > > > > > > > > > > record the decision that we want Flink to be Scala free in the > long > > > > term. > > > > > > We could then point to this in the future. There are some > decisions > > > in > > > > > > Flink that are somewhat hidden in ML discussions or Jira issues, > > and > > > > > > therefore hard to find, for example the decision to eventually > > phase > > > > out > > > > > > the DataSet API, or the decision to drop the older Python APIs, > or > > > the > > > > > > semantics of savepoints and checkpoints. Some FLIPs might not be > > > about > > > > > > implementing a certain feature but just a general direction that > we > > > > want > > > > > > > > > > > > to > > > > > > > > > > > > take. I think we should have more of these. > > > > > > > > > > > > What do you think? > > > > > > > > > > > > Best, > > > > > > Aljoscha > > > > > > > > > > > > [1] > > > > > > > > > > > > > > > > > > > > > > > > > > > https://cwiki.apache.org/confluence/display/FLINK/Flink+Improvement+Proposals > > > > > > > > > > > > [2] > > > > > > > > > > > > > > > > > > > > > > > > > > > https://cwiki.apache.org/confluence/display/KAFKA/Bylaws#Bylaws-Approvals > > > > > > > > > > > > [3] > > > > > > > > > > > > > > > > > > > > > > > > > > > https://cwiki.apache.org/confluence/display/FLINK/FLIP-28%3A+Long-term+goal+of+making+flink-table+Scala-free > > > > > > > > > > > > > > > > > > > > > > > > > > >