Hi Jiabao, Please see the reply inline.
> The MySQL connector is currently in the flink-connector-jdbc repository > and is not a standalone connector. > Is it too unique to use "mysql" as the configuration option prefix? If the intended behavior makes sense to all the supported JDBC drivers, we can make this a JDBC connector configuration. Also, I would like to ask about the difference in behavior between AUTO and > ALWAYS. > It seems that we cannot guarantee the pushing down of all filters to the > external system under the ALWAYS > mode because not all filters in Flink SQL are supported by the external > system. > Should we throw an error when encountering a filter that cannot be pushed > down in the ALWAYS mode? The idea of AUTO is to do efficiency-aware pushdowns. The source will query the external system (MySQL, Oracle, SQL Server, etc) first to retrieve the information of the table. With that information, the source will decide whether to further push a filter to the external system based on the efficiency. E.g. only push the indexed fields. In contrast, ALWAYS will just always push the supported filters to the external system, regardless of the efficiency. In case there are filters that are not supported, according to the current contract of SupportsFilterPushdown, these unsupported filters should just be returned by the *SupportsFilterPushdown.applyFilters()* method as remaining filters. Therefore, there is no need to throw exceptions here. This is likely the desired behavior for most users, IMO. If there are cases that users really want to get alerted when a filter cannot be pushed to the external system, we can add another value like "ENFORCED_ALWAYS", which behaves like ALWAYS, but throws exceptions when a filter cannot be applied to the external system. But personally I don't see much value in doing this. Thanks, Jiangjie (Becket) Qin On Mon, Dec 18, 2023 at 3:54 PM Jiabao Sun <jiabao....@xtransfer.cn.invalid> wrote: > Hi Becket, > > The MySQL connector is currently in the flink-connector-jdbc repository > and is not a standalone connector. > Is it too unique to use "mysql" as the configuration option prefix? > > Also, I would like to ask about the difference in behavior between AUTO > and ALWAYS. > It seems that we cannot guarantee the pushing down of all filters to the > external system under the ALWAYS > mode because not all filters in Flink SQL are supported by the external > system. > Should we throw an error when encountering a filter that cannot be pushed > down in the ALWAYS mode? > > Thanks, > Jiabao > > > 2023年12月18日 15:34，Becket Qin <becket....@gmail.com> 写道： > > > > Hi JIabao, > > > > Thanks for updating the FLIP. Maybe I did not explain it clearly enough. > My > > point is that given there are various good flavors of behaviors handling > > filters pushed down, we should not have a common config of > > "ignore.filter.pushdown", because the behavior is not *common*. > > > > It looks like the original motivation of this FLIP is just for MySql. > Let's > > focus on what is the best solution for MySql connector here first. After > > that, if people think the best behavior for MySql happens to be a common > > one, we can then discuss whether that is worth being added to the base > > implementation of source. For MySQL, if we are going to introduce a > config > > to MySql, why not have something like "mysql.filter.handling.policy" with > > value of AUTO / NEVER / ALWAYS? Isn't that better than > > "ignore.filter.pushdown"? > > > > Thanks, > > > > Jiangjie (Becket) Qin > > > > > > > > On Sun, Dec 17, 2023 at 11:30 PM Jiabao Sun <jiabao....@xtransfer.cn > .invalid> > > wrote: > > > >> Hi Becket, > >> > >> The FLIP document has been updated as well. > >> Please take a look when you have time. > >> > >> Thanks, > >> Jiabao > >> > >> > >>> 2023年12月17日 22:54，Jiabao Sun <jiabao....@xtransfer.cn.INVALID> 写道： > >>> > >>> Thanks Becket, > >>> > >>> I apologize for not being able to continue with this proposal due to > >> being too busy during this period. > >>> > >>> The viewpoints you shared about the design of Flink Source make sense > to > >> me > >>> The native configuration ‘ignore.filter.pushdown’ is good to me. > >>> Having a unified name or naming style can indeed prevent confusion for > >> users regarding > >>> the inconsistent naming of this configuration across different > >> connectors. > >>> > >>> Currently, there are not many external connectors that support filter > >> pushdown. > >>> I propose that we first introduce it in flink-connector-jdbc and > >> flink-connector-mongodb. > >>> Do you think this is feasible? > >>> > >>> Best, > >>> Jiabao > >>> > >>> > >>>> 2023年11月16日 17:45，Becket Qin <becket....@gmail.com> 写道： > >>>> > >>>> Hi Jiabao, > >>>> > >>>> Arguments like "because Spark has it so Flink should also have it" > does > >> not > >>>> make sense. Different projects have different API flavors and styles. > >> What > >>>> is really important is the rationale and the design principle behind > the > >>>> API. They should conform to the convention of the project. > >>>> > >>>> First of all, Spark Source API itself has a few issues and they ended > up > >>>> introduce DataSource V2 in Spark 3.0, which added the decorative > >> interfaces > >>>> like SupportsPushdownXXX. Some of the configurations predating > >> DataSource > >>>> V2 may still be there. > >>>> > >>>> For the Spark configurations you mentioned, they are all the > >> configurations > >>>> for FileScanBuilder, which is equivalent to FileSource in Flink. > >> Currently, > >>>> regardless of the format (ORC, Parquet, Avro, etc), the FileSource > >> pushes > >>>> back all the filters to ensure correctness. The actual filters that > got > >>>> applied to the specific format might still be different. This > >>>> implementation is the same in FileScanBuilder.pushFilters() for > Spark. I > >>>> don't know why Spark got separate configurations for each format. > Maybe > >> it > >>>> is because the filters are actually implemented differently for > >> different > >>>> format. > >>>> > >>>> At least for the current implementation in FileScanBuilder, these > >>>> configurations can be merged to one configuration like > >>>> `apply.filters.to.format.enabled`. Note that this config, as well as > the > >>>> separate configs you mentioned, are just visible and used by the > >>>> FileScanBuilder. It determines whether the filters should be passed > >> down to > >>>> the format of the FileScanBuilder instance. Regardless of the value of > >>>> these configs, FileScanBuilder.pushFilters() will always be called, > and > >>>> FileScanBuilder (as well as FileSource in Flink) will always push back > >> all > >>>> the filters to the framework. > >>>> > >>>> A MySql source can have a very different way to handle this. For > >> example, A > >>>> MySql source A config in this case might be "my.apply.filters" with > >> three > >>>> different values: > >>>> - AUTO: The Source will issue a DESC Table request to understand > >> whether a > >>>> filter can be applied efficiently. And decide which filters can be > >> applied > >>>> and which cannot based on that. > >>>> - NEVER: Never apply filtering. It will always do a full table read > and > >>>> let Flink do the filtering. > >>>> - ALWAYS: Always apply the filtering to the MySql server. > >>>> > >>>> In the above examples of FileSource and MySql Source, I don't think it > >> is a > >>>> good idea to shoehorn the behaviors into a naive config of > >>>> `ignore.filter.pushdown`. That is why I don't think this is a common > >> config. > >>>> > >>>> To recap, like I said, I do agree that in some cases, we may want to > >> behave > >>>> differently when filters are pushed down to the sources, even if a > >> source > >>>> implements SupportsFilterPushDown, but I don't think there is a > suitable > >>>> common config for this. The behavior is very likely source specific. > >>>> > >>>> Thanks, > >>>> > >>>> Jiangjie (Becket) Qin > >>>> > >>>> > >>>> > >>>> On Thu, Nov 16, 2023 at 3:41 PM Jiabao Sun <jiabao....@xtransfer.cn > >> .invalid> > >>>> wrote: > >>>> > >>>>> Thanks Becket, > >>>>> > >>>>> I still believe that adding a configuration at the source level to > >> disable > >>>>> filter pushdown is needed. This demand exists in spark as well[1]. > >>>>> > >>>>> In Spark, most sources that support filter pushdown provide their own > >>>>> corresponding configuration options to enable or disable filter > >> pushdown. > >>>>> For PRs[2-4] that support filter pushdown capability, they also > provide > >>>>> configuration options to disable this capability. > >>>>> > >>>>> I believe this configuration is applicable to most scenarios, and > >> there is > >>>>> no need to dwell on why this configuration option was not introduced > >>>>> earlier than the SupportsFilterPushDown interface. > >>>>> > >>>>> spark.sql.parquet.filterPushdown > >>>>> spark.sql.orc.filterPushdown > >>>>> spark.sql.csv.filterPushdown.enabled > >>>>> spark.sql.json.filterPushdown.enabled > >>>>> spark.sql.avro.filterPushdown.enabled > >>>>> JDBC Option: pushDownPredicate > >>>>> > >>>>> We can see that the lack of consistency is caused by each connector > >>>>> introducing different configuration options for the same behavior. > >>>>> This is one of the motivations for advocating the introduction of a > >>>>> unified configuration name. > >>>>> > >>>>> [1] https://issues.apache.org/jira/browse/SPARK-24288 > >>>>> [2] https://github.com/apache/spark/pull/27366 > >>>>> [3]https://github.com/apache/spark/pull/26973 > >>>>> [4] https://github.com/apache/spark/pull/29145 > >>>>> > >>>>> Best, > >>>>> Jiabao > >>>>> > >>>>>> 2023年11月16日 08:10，Becket Qin <becket....@gmail.com> 写道： > >>>>>> > >>>>>> Hi Jiabao, > >>>>>> > >>>>>> While we can always fix the formality of the config, a more > >> fundamental > >>>>>> issue here is whether this configuration is common enough. > Personally > >> I > >>>>> am > >>>>>> still not convinced it is. > >>>>>> > >>>>>> Remember we don't have a common implementation for > >> SupportsFilterPushdown > >>>>>> itself. Why does a potential behavior of the > >>>>>> SupportsFilterPushdown.applyFilters() method deserve a common > >>>>>> configuration? A common implementation should always come first, > then > >> its > >>>>>> configuration becomes a common configuration as a natural result. > But > >>>>> here > >>>>>> we are trying to add an impl to a configuration just to fix its > >>>>> formality. > >>>>>> > >>>>>> I agree that there might be a few Source implementations that may > >> want to > >>>>>> avoid additional burdens on the remote system in some circumstances. > >> And > >>>>>> these circumstances are very specific: > >>>>>> 1. The source talks to a remote service that can help perform the > >> actual > >>>>>> filtering. > >>>>>> 2. The filtering done by the remote service is inefficient for some > >>>>> reason > >>>>>> (e.g. missing index) > >>>>>> 3. The external service does not want to perform the inefficient > >>>>> filtering > >>>>>> for some reason (e.g. it is a shared service with others) > >>>>>> > >>>>>> There are multiple approaches to address the issue. Pushing back the > >>>>>> filters is just one way of achieving this. So here we are talking > >> about a > >>>>>> config for one of the possible solutions to a scenario with all the > >> above > >>>>>> situations. I don't think there is enough justification for the > >> config to > >>>>>> be common. > >>>>>> > >>>>>> There is always this trade-off between the proliferation of public > >>>>>> interfaces and the API standardization. As an extreme example, we > can > >>>>> make > >>>>>> our public API a union of all the configs potentially used in all > the > >>>>> cases > >>>>>> in the name of standardization. Apparently this won't work. So there > >> must > >>>>>> be a bar here and this bar might be somewhat subjective. For this > >> FLIP, > >>>>>> personally I don't think the config meets my bar for the reason > stated > >>>>>> above. > >>>>>> > >>>>>> Therefore, my suggestion remains the same. Keep the config as a > Source > >>>>>> implementation specific configuration. > >>>>>> > >>>>>> Thanks, > >>>>>> > >>>>>> Jiangjie (Becket) Qin > >>>>>> > >>>>>> > >>>>>> > >>>>>> On Thu, Nov 16, 2023 at 12:36 AM Jiabao Sun < > jiabao....@xtransfer.cn > >>>>> .invalid> > >>>>>> wrote: > >>>>>> > >>>>>>> Thanks Becket for the feedback, > >>>>>>> > >>>>>>> Regarding concerns about common configurations, I think we can > >> introduce > >>>>>>> FiltersApplier to unify the behavior of various connectors. > >>>>>>> > >>>>>>> public static class FiltersApplier { > >>>>>>> > >>>>>>> private final ReadableConfig config; > >>>>>>> private final Function<List<ResolvedExpression>, Result> action; > >>>>>>> > >>>>>>> private FiltersApplier( > >>>>>>> ReadableConfig config, > >>>>>>> Function<List<ResolvedExpression>, Result> action) { > >>>>>>> this.config = config; > >>>>>>> this.action = action; > >>>>>>> } > >>>>>>> > >>>>>>> public Result applyFilters(List<ResolvedExpression> filters) { > >>>>>>> if (config.get(ENABLE_FILTER_PUSH_DOWN)) { > >>>>>>> return action.apply(filters); > >>>>>>> } else { > >>>>>>> return Result.of(Collections.emptyList(), filters); > >>>>>>> } > >>>>>>> } > >>>>>>> > >>>>>>> public static FiltersApplier of( > >>>>>>> ReadableConfig config, > >>>>>>> Function<List<ResolvedExpression>, Result> action) { > >>>>>>> return new FiltersApplier(config, action); > >>>>>>> } > >>>>>>> } > >>>>>>> > >>>>>>> For connectors implementation: > >>>>>>> > >>>>>>> @Override > >>>>>>> public Result applyFilters(List<ResolvedExpression> filters) { > >>>>>>> return FiltersApplier.of(config, > >>>>>>> f -> Result.of(new ArrayList<>(filters), > >>>>>>> Collections.emptyList())); > >>>>>>> } > >>>>>>> > >>>>>>> As for the name, whether it is "source.filter-push-down.enabled" or > >>>>>>> "source.ignore-pushed-down-filters.enabled", I think both are okay. > >>>>>>> > >>>>>>> Do you think this change is feasible? > >>>>>>> > >>>>>>> > >>>>>>> Best, > >>>>>>> Jiabao > >>>>>>> > >>>>>>> > >>>>>>>> 2023年11月15日 23:44，Becket Qin <becket....@gmail.com> 写道： > >>>>>>>> > >>>>>>>> Hi Jiabao, > >>>>>>>> > >>>>>>>> Yes, I still have concerns. > >>>>>>>> > >>>>>>>> The FLIP violates the following two principles regarding > >> configuration: > >>>>>>>> > >>>>>>>> 1.* A config of a class should never negate the semantic of a > >>>>> decorative > >>>>>>>> interface implemented by that class. * > >>>>>>>> A decorative interface is a public contract with other components, > >>>>> while > >>>>>>> a > >>>>>>>> config is only internal to the class itself. The configurations > for > >> the > >>>>>>>> Sources are not (and should never be) visible or understood to > >>>>>>>> other components (e.g. optimizer). A configuration of a Source > only > >>>>>>>> controls the behavior of that Source, provided it is not violating > >> the > >>>>>>> API > >>>>>>>> contract / semantic defined by the decorative interface. So when a > >>>>> Source > >>>>>>>> implementation implements SupportsFilterPushdown, this is a clear > >>>>> public > >>>>>>>> contract with Flink that filters should be pushed down to that > >> Source. > >>>>>>>> Therefore, for the same source, there should not be a > configuration > >>>>>>>> "source.filter-push-down.enabled" which stops the filters from > being > >>>>>>> pushed > >>>>>>>> down to that Source. However, that specific source implementation > >> can > >>>>>>> have > >>>>>>>> its own config to control its internal behavior, e.g. > >>>>>>>> "ignore-pushed-down-filters.enabled" which may push back all the > >> pushed > >>>>>>>> down filters back to the Flink optimizer. > >>>>>>>> > >>>>>>>> 2. When we are talking about "common configs", in fact we are > >> talking > >>>>>>> about > >>>>>>>> "configs for common (abstract) implementation classes". With that > >> as a > >>>>>>>> context, *a common config should always be backed by a common > >>>>>>>> implementation class, so that consistent behavior can be > >> guaranteed. * > >>>>>>>> The LookupOptions you mentioned are configurations defined for > >> classes > >>>>>>>> DefaultLookupCache / PeriodicCacheReloadTrigger / > >>>>>>> TimedCacheReloadTrigger. > >>>>>>>> These configs are considered as "common" only because the > >>>>> implementation > >>>>>>>> classes using them are common building blocks for lookup table > >>>>>>>> implementations. It would not make sense to have a dangling config > >> in > >>>>> the > >>>>>>>> LookupOptions without the underlying common implementation class, > >> but > >>>>>>> only > >>>>>>>> relies on a specific source to implement the stated behavior. > >>>>>>>> As a bad example, there is this outlier config "max-retries" in > >>>>>>>> LookupOptions, which I don't think should be here. This is because > >> the > >>>>>>>> retry behavior can be very implementation specific. For example, > >> there > >>>>>>> can > >>>>>>>> be many different flavors of retry related configurations, > >>>>> retry-backoff, > >>>>>>>> retry-timeout, retry-async, etc. Why only max-retry is put here? > >> should > >>>>>>> all > >>>>>>>> of them be put here? If we put all such kinds of configs in the > >> common > >>>>>>>> configs for "standardization and unification", the number of > "common > >>>>>>>> configs" can easily go crazy. And I don't see material benefits of > >>>>> doing > >>>>>>>> that. So here I don't think the configuration "max-retry" should > be > >> in > >>>>>>>> LookupOptions, because it is not backed by any common > implementation > >>>>>>>> classes. If max-retry is implemented in the HBase source, it > should > >>>>> stay > >>>>>>>> there. For the same reason, the config proposed in this FLIP > >> (probably > >>>>>>> with > >>>>>>>> a name less confusing for the first reason mentioned above) > should > >>>>> stay > >>>>>>> in > >>>>>>>> the specific Source implementation. > >>>>>>>> > >>>>>>>> For the two reasons above, I am -1 to what the FLIP currently > >> proposes. > >>>>>>>> > >>>>>>>> I think the right way to address the motivation here is still to > >> have a > >>>>>>>> config like "ignore-pushed-down-filters.enabled" for the specific > >>>>> source > >>>>>>>> implementation. Please let me know if this solves the problem you > >> are > >>>>>>>> facing. > >>>>>>>> > >>>>>>>> Thanks, > >>>>>>>> > >>>>>>>> Jiangjie (Becket) Qin > >>>>>>>> > >>>>>>>> > >>>>>>>> On Wed, Nov 15, 2023 at 11:52 AM Jiabao Sun < > >> jiabao....@xtransfer.cn > >>>>>>> .invalid> > >>>>>>>> wrote: > >>>>>>>> > >>>>>>>>> Hi Becket, > >>>>>>>>> > >>>>>>>>> The purpose of introducing this configuration is that not all > >> filter > >>>>>>>>> pushdowns can improve overall performance. > >>>>>>>>> If the filter can hit the external index, then pushdown is > >> definitely > >>>>>>>>> worth it, as it can not only improve query time but also decrease > >>>>>>> network > >>>>>>>>> overhead. > >>>>>>>>> However, for filters that do not hit the external index, it may > >>>>>>> increase a > >>>>>>>>> lot of performance overhead on the external system. > >>>>>>>>> > >>>>>>>>> Undeniably, if the connector can make accurate decisions for good > >> and > >>>>>>> bad > >>>>>>>>> filters, we may not need to introduce this configuration option > to > >>>>>>> disable > >>>>>>>>> pushing down filters to the external system. > >>>>>>>>> However, it is currently not easy to achieve. > >>>>>>>>> > >>>>>>>>> IMO, supporting filter pushdown does not mean that always filter > >>>>>>> pushdown > >>>>>>>>> is better. > >>>>>>>>> In the absence of automatic decision-making, I think we should > >> leave > >>>>>>> this > >>>>>>>>> decision to users. > >>>>>>>>> > >>>>>>>>> The newly introduced configuration option is similar to > >> LookupOptions, > >>>>>>>>> providing unified naming and default values to avoid confusion > >> caused > >>>>> by > >>>>>>>>> inconsistent naming in different connectors for users. > >>>>>>>>> Setting the default value to true allows it to maintain > >> compatibility > >>>>>>> with > >>>>>>>>> the default behavior of "always pushdown". > >>>>>>>>> > >>>>>>>>> Do you have any other concerns about this proposal? Please let me > >>>>> know. > >>>>>>>>> > >>>>>>>>> Thanks, > >>>>>>>>> Jiabao > >>>>>>>>> > >>>>>>>>> > >>>>>>>>>> 2023年10月31日 17:29，Jiabao Sun <jiabao....@xtransfer.cn.INVALID> > >> 写道： > >>>>>>>>>> > >>>>>>>>>> Hi Becket, > >>>>>>>>>> > >>>>>>>>>> Actually, for FileSystemSource, it is not always desired, only > OCR > >>>>> file > >>>>>>>>> formats support filter pushdown. > >>>>>>>>>> > >>>>>>>>>> We can disable predicate pushdown for FileSystemSource by > setting > >>>>>>>>> 'table.optimizer.source.predicate-pushdown-enabled' to false. > >>>>>>>>>> I think we can also disable filter pushdown at a more granular > >> level > >>>>>>>>> through fine-grained configuration. > >>>>>>>>>> > >>>>>>>>>> > >>>>>>>>>> Best, > >>>>>>>>>> Jiabao > >>>>>>>>>> > >>>>>>>>>> > >>>>>>>>>>> 2023年10月31日 16:50，Becket Qin <becket....@gmail.com> 写道： > >>>>>>>>>>> > >>>>>>>>>>> Hi Jiabao, > >>>>>>>>>>> > >>>>>>>>>>> Thanks for the explanation. Maybe it's easier to explain with > an > >>>>>>>>> example. > >>>>>>>>>>> > >>>>>>>>>>> Let's take FileSystemTableSource as an example. Currently it > >>>>>>> implements > >>>>>>>>>>> SupportsFilterPushDown interface. With your proposal, does it > >> have > >>>>> to > >>>>>>>>>>> support `source.filter-push-down.enabled` as well? But this > >>>>>>>>> configuration > >>>>>>>>>>> does not quite make sense for the FileSystemTableSource because > >>>>> filter > >>>>>>>>>>> pushdown is always desired. However, because this configuration > >> is a > >>>>>>>>> part > >>>>>>>>>>> of the SupportsFilterPushDown interface (which sounds confusing > >> to > >>>>>>> begin > >>>>>>>>>>> with), the FileSystemTableSource can only do one of the > >> following: > >>>>>>>>>>> > >>>>>>>>>>> 1. Ignore the user configuration to always apply the pushed > down > >>>>>>>>> filters - > >>>>>>>>>>> this is an apparent anti-pattern because a configuration should > >>>>> always > >>>>>>>>> do > >>>>>>>>>>> what it says. > >>>>>>>>>>> 2. Throw an exception telling users that this configuration is > >> not > >>>>>>>>>>> applicable to the FileSystemTableSource. > >>>>>>>>>>> 3. Implement this configuration to push back the pushed down > >>>>> filters, > >>>>>>>>> even > >>>>>>>>>>> though this is never desired. > >>>>>>>>>>> > >>>>>>>>>>> None of the above options looks awkward. I am curious what your > >>>>>>>>> solution is > >>>>>>>>>>> here? > >>>>>>>>>>> > >>>>>>>>>>> Thanks, > >>>>>>>>>>> > >>>>>>>>>>> Jiangjie (Becket) Qin > >>>>>>>>>>> > >>>>>>>>>>> On Tue, Oct 31, 2023 at 3:11 PM Jiabao Sun < > >> jiabao....@xtransfer.cn > >>>>>>>>> .invalid> > >>>>>>>>>>> wrote: > >>>>>>>>>>> > >>>>>>>>>>>> Thanks Becket for the further explanation. > >>>>>>>>>>>> > >>>>>>>>>>>> Perhaps I didn't explain it clearly. > >>>>>>>>>>>> > >>>>>>>>>>>> 1. If a source does not implement the SupportsFilterPushDown > >>>>>>> interface, > >>>>>>>>>>>> the newly added configurations do not need to be added to > either > >>>>> the > >>>>>>>>>>>> requiredOptions or optionalOptions. > >>>>>>>>>>>> Similar to LookupOptions, if a source does not implement > >>>>>>>>>>>> LookupTableSource, there is no need to add LookupOptions to > >> either > >>>>>>>>>>>> requiredOptions or optionalOptions. > >>>>>>>>>>>> > >>>>>>>>>>>> 2. "And these configs are specific to those sources, instead > of > >>>>>>> common > >>>>>>>>>>>> configs." > >>>>>>>>>>>> The newly introduced configurations define standardized names > >> and > >>>>>>>>> default > >>>>>>>>>>>> values. > >>>>>>>>>>>> They still belong to the configuration at the individual > source > >>>>>>> level. > >>>>>>>>>>>> The purpose is to avoid scattered configuration items when > >>>>> different > >>>>>>>>>>>> sources implement the same logic. > >>>>>>>>>>>> Whether a source should accept these configurations is > >> determined > >>>>> by > >>>>>>>>> the > >>>>>>>>>>>> source's Factory. > >>>>>>>>>>>> > >>>>>>>>>>>> Best, > >>>>>>>>>>>> Jiabao > >>>>>>>>>>>> > >>>>>>>>>>>> > >>>>>>>>>>>>> 2023年10月31日 13:47，Becket Qin <becket....@gmail.com> 写道： > >>>>>>>>>>>>> > >>>>>>>>>>>>> Hi Jiabao, > >>>>>>>>>>>>> > >>>>>>>>>>>>> Please see the replies inline. > >>>>>>>>>>>>> > >>>>>>>>>>>>> Introducing common configurations does not mean that all > >> sources > >>>>>>> must > >>>>>>>>>>>>>> accept these configuration options. > >>>>>>>>>>>>>> The configuration options supported by a source are > >> determined by > >>>>>>> the > >>>>>>>>>>>>>> requiredOptions and optionalOptions in the Factory > interface. > >>>>>>>>>>>>> > >>>>>>>>>>>>> This is not true. Both required and optional options are > >>>>> SUPPORTED. > >>>>>>>>> That > >>>>>>>>>>>>> means they are implemented and if one specifies an optional > >> config > >>>>>>> it > >>>>>>>>>>>> will > >>>>>>>>>>>>> still take effect. An OptionalConfig is "Optional" because > this > >>>>>>>>>>>>> configuration has a default value. Hence, it is OK that users > >> do > >>>>> not > >>>>>>>>>>>>> specify their own value. In another word, it is "optional" > for > >> the > >>>>>>> end > >>>>>>>>>>>>> users to set the config, but the implementation and support > for > >>>>> that > >>>>>>>>>>>> config > >>>>>>>>>>>>> is NOT optional. In case a source does not support a common > >>>>> config, > >>>>>>> an > >>>>>>>>>>>>> exception must be thrown when the config is provided by the > end > >>>>>>> users. > >>>>>>>>>>>>> However, the config we are talking about in this FLIP is a > >> common > >>>>>>>>> config > >>>>>>>>>>>>> optional to implement, meaning that sometimes the claimed > >> behavior > >>>>>>>>> won't > >>>>>>>>>>>> be > >>>>>>>>>>>>> there even if users specify that config. > >>>>>>>>>>>>> > >>>>>>>>>>>>> Similar to sources that do not implement the > LookupTableSource > >>>>>>>>> interface, > >>>>>>>>>>>>>> sources that do not implement the SupportsFilterPushDown > >>>>> interface > >>>>>>>>> also > >>>>>>>>>>>> do > >>>>>>>>>>>>>> not need to accept newly introduced options. > >>>>>>>>>>>>> > >>>>>>>>>>>>> First of all, filter pushdown is a behavior of the query > >>>>> optimizer, > >>>>>>>>> not > >>>>>>>>>>>> the > >>>>>>>>>>>>> behavior of Sources. The Sources tells the optimizer that it > >> has > >>>>> the > >>>>>>>>>>>>> ability to accept pushed down filters by implementing the > >>>>>>>>>>>>> SupportsFilterPushDown interface. And this is the only > contract > >>>>>>>>> between > >>>>>>>>>>>> the > >>>>>>>>>>>>> Source and Optimizer regarding whether filters should be > pushed > >>>>>>> down. > >>>>>>>>> As > >>>>>>>>>>>>> long as a specific source implements this decorative > interface, > >>>>>>> filter > >>>>>>>>>>>>> pushdown should always take place, i.e. > >>>>>>>>>>>>> *SupportsFilterPushDown.applyFilters()* will be called. There > >>>>> should > >>>>>>>>> be > >>>>>>>>>>>> no > >>>>>>>>>>>>> other config to disable that call. However, Sources can > decide > >> how > >>>>>>> to > >>>>>>>>>>>>> behave based on their own configurations after > >> *applyFilters()* is > >>>>>>>>>>>> called. > >>>>>>>>>>>>> And these configs are specific to those sources, instead of > >> common > >>>>>>>>>>>> configs. > >>>>>>>>>>>>> Please see the examples I mentioned in the previous email. > >>>>>>>>>>>>> > >>>>>>>>>>>>> Thanks, > >>>>>>>>>>>>> > >>>>>>>>>>>>> Jiangjie (Becket) Qin > >>>>>>>>>>>>> > >>>>>>>>>>>>> On Tue, Oct 31, 2023 at 10:27 AM Jiabao Sun < > >>>>>>> jiabao....@xtransfer.cn > >>>>>>>>>>>> .invalid> > >>>>>>>>>>>>> wrote: > >>>>>>>>>>>>> > >>>>>>>>>>>>>> Hi Becket, > >>>>>>>>>>>>>> > >>>>>>>>>>>>>> Sorry, there was a typo in the second point. Let me correct > >> it: > >>>>>>>>>>>>>> > >>>>>>>>>>>>>> Introducing common configurations does not mean that all > >> sources > >>>>>>> must > >>>>>>>>>>>>>> accept these configuration options. > >>>>>>>>>>>>>> The configuration options supported by a source are > >> determined by > >>>>>>> the > >>>>>>>>>>>>>> requiredOptions and optionalOptions in the Factory > interface. > >>>>>>>>>>>>>> > >>>>>>>>>>>>>> Similar to sources that do not implement the > LookupTableSource > >>>>>>>>>>>> interface, > >>>>>>>>>>>>>> sources that do not implement the SupportsFilterPushDown > >>>>> interface > >>>>>>>>> also > >>>>>>>>>>>> do > >>>>>>>>>>>>>> not need to accept newly introduced options. > >>>>>>>>>>>>>> > >>>>>>>>>>>>>> Best, > >>>>>>>>>>>>>> Jiabao > >>>>>>>>>>>>>> > >>>>>>>>>>>>>> > >>>>>>>>>>>>>>> 2023年10月31日 10:13，Jiabao Sun <jiabao....@xtransfer.cn > >> .INVALID> > >>>>>>> 写道： > >>>>>>>>>>>>>>> > >>>>>>>>>>>>>>> Thanks Becket for the feedback. > >>>>>>>>>>>>>>> > >>>>>>>>>>>>>>> 1. Currently, the SupportsFilterPushDown#applyFilters > method > >>>>>>>>> returns a > >>>>>>>>>>>>>> result that includes acceptedFilters and remainingFilters. > The > >>>>>>> source > >>>>>>>>>>>> can > >>>>>>>>>>>>>> decide to push down some filters or not accept any of them. > >>>>>>>>>>>>>>> 2. Introducing common configuration options does not mean > >> that a > >>>>>>>>> source > >>>>>>>>>>>>>> that supports the SupportsFilterPushDown capability must > >> accept > >>>>>>> this > >>>>>>>>>>>>>> configuration. Similar to LookupOptions, only sources that > >>>>>>> implement > >>>>>>>>> the > >>>>>>>>>>>>>> LookupTableSource interface are necessary to accept these > >>>>>>>>> configuration > >>>>>>>>>>>>>> options. > >>>>>>>>>>>>>>> > >>>>>>>>>>>>>>> Best, > >>>>>>>>>>>>>>> Jiabao > >>>>>>>>>>>>>>> > >>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>> 2023年10月31日 07:49，Becket Qin <becket....@gmail.com> 写道： > >>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>> Hi Jiabao and Ruanhang, > >>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>> Adding a configuration of source.filter-push-down.enabled > >> as a > >>>>>>>>> common > >>>>>>>>>>>>>>>> source configuration seems problematic. > >>>>>>>>>>>>>>>> 1. The config name is misleading. filter pushdown should > >> only > >>>>> be > >>>>>>>>>>>>>> determined > >>>>>>>>>>>>>>>> by whether the SupportsFilterPushdown interface is > >> implemented > >>>>> or > >>>>>>>>> not. > >>>>>>>>>>>>>>>> 2. The behavior of this configuration is only applicable > to > >>>>> some > >>>>>>>>>>>> source > >>>>>>>>>>>>>>>> implementations. Why is it a common configuration? > >>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>> Here's my suggestion for design principles: > >>>>>>>>>>>>>>>> 1. Only add source impl specific configuration to > >> corresponding > >>>>>>>>>>>> sources. > >>>>>>>>>>>>>>>> 2. The configuration name should not overrule existing > >> common > >>>>>>>>>>>> contracts. > >>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>> For example, in the case of MySql source. There are > several > >>>>>>>>> options: > >>>>>>>>>>>>>>>> 1. Have a configuration of > >>>>>>> `*mysql.avoid.remote.full.table.scan`*. > >>>>>>>>> If > >>>>>>>>>>>>>> this > >>>>>>>>>>>>>>>> configuration is set, and a filter pushdown does not hit > an > >>>>>>> index, > >>>>>>>>> the > >>>>>>>>>>>>>>>> MySql source impl would not further pushdown the filter to > >>>>> MySql > >>>>>>>>>>>>>> servers. > >>>>>>>>>>>>>>>> Note that this assumes the MySql source can retrieve the > >> index > >>>>>>>>>>>>>> information > >>>>>>>>>>>>>>>> from the MySql servers. > >>>>>>>>>>>>>>>> 2. If the MySql index information is not available to the > >> MySql > >>>>>>>>>>>> source, > >>>>>>>>>>>>>> the > >>>>>>>>>>>>>>>> configuration could be something like > >>>>>>>>>>>>>> *`mysql.pushback.pushed.down.filters`*. > >>>>>>>>>>>>>>>> Once set to true, MySql source would just add all the > >> filters > >>>>> to > >>>>>>>>> the > >>>>>>>>>>>>>>>> RemainingFilters in the Result returned by > >>>>>>>>>>>>>>>> *SupportsFilterPushdown.applyFilters().* > >>>>>>>>>>>>>>>> 3. An alternative to option 2 is to have a ` > >>>>>>>>>>>>>>>> *mysql.apply.predicates.after.scan*`. When it is set to > >> true, > >>>>>>> MySql > >>>>>>>>>>>>>> source > >>>>>>>>>>>>>>>> will not push the filter down to the MySql servers, but > >> apply > >>>>> the > >>>>>>>>>>>>>> filters > >>>>>>>>>>>>>>>> inside the MySql source itself. > >>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>> As you may see, the above configurations do not disable > >> filter > >>>>>>>>>>>> pushdown > >>>>>>>>>>>>>>>> itself. They just allow various implementations of filter > >>>>>>> pushdown. > >>>>>>>>>>>> And > >>>>>>>>>>>>>> the > >>>>>>>>>>>>>>>> configuration name does not give any illusion that filter > >>>>>>> pushdown > >>>>>>>>> is > >>>>>>>>>>>>>>>> disabled. > >>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>> Thanks, > >>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>> Jiangjie (Becket) Qin > >>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>> On Mon, Oct 30, 2023 at 11:58 PM Jiabao Sun < > >>>>>>>>> jiabao....@xtransfer.cn > >>>>>>>>>>>>>> .invalid> > >>>>>>>>>>>>>>>> wrote: > >>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>> Thanks Hang for the suggestion. > >>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>> I think the configuration of TableSource is not closely > >>>>> related > >>>>>>> to > >>>>>>>>>>>>>>>>> SourceReader, > >>>>>>>>>>>>>>>>> so I prefer to introduce a independent configuration > class > >>>>>>>>>>>>>>>>> TableSourceOptions in the flink-table-common module, > >> similar > >>>>> to > >>>>>>>>>>>>>>>>> LookupOptions. > >>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>> For the second point, I suggest adding Java doc to the > >>>>>>>>>>>>>> SupportsXXXPushDown > >>>>>>>>>>>>>>>>> interfaces, providing detailed information on these > options > >>>>> that > >>>>>>>>>>>> needs > >>>>>>>>>>>>>> to > >>>>>>>>>>>>>>>>> be supported. > >>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>> I have made updates in the FLIP document. > >>>>>>>>>>>>>>>>> Please help check it again. > >>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>> Best, > >>>>>>>>>>>>>>>>> Jiabao > >>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>> 2023年10月30日 17:23，Hang Ruan <ruanhang1...@gmail.com> > 写道： > >>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>> Thanks for the improvements, Jiabao. > >>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>> There are some details that I am not sure about. > >>>>>>>>>>>>>>>>>> 1. The new option `source.filter-push-down.enabled` will > >> be > >>>>>>>>> added to > >>>>>>>>>>>>>>>>> which > >>>>>>>>>>>>>>>>>> class? I think it should be `SourceReaderOptions`. > >>>>>>>>>>>>>>>>>> 2. How are the connector developers able to know and > >> follow > >>>>> the > >>>>>>>>>>>> FLIP? > >>>>>>>>>>>>>> Do > >>>>>>>>>>>>>>>>> we > >>>>>>>>>>>>>>>>>> need an abstract base class or provide a default method? > >>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>> Best, > >>>>>>>>>>>>>>>>>> Hang > >>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>> Jiabao Sun <jiabao....@xtransfer.cn.invalid> > >> 于2023年10月30日周一 > >>>>>>>>>>>> 14:45写道： > >>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>> Hi, all, > >>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>> Thanks for the lively discussion. > >>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>> Based on the discussion, I have made some adjustments > to > >> the > >>>>>>>>> FLIP > >>>>>>>>>>>>>>>>> document: > >>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>> 1. The name of the newly added option has been changed > to > >>>>>>>>>>>>>>>>>>> "source.filter-push-down.enabled". > >>>>>>>>>>>>>>>>>>> 2. Considering compatibility with older versions, the > >> newly > >>>>>>>>> added > >>>>>>>>>>>>>>>>>>> "source.filter-push-down.enabled" option needs to > respect > >>>>> the > >>>>>>>>>>>>>>>>> optimizer's > >>>>>>>>>>>>>>>>>>> "table.optimizer.source.predicate-pushdown-enabled" > >> option. > >>>>>>>>>>>>>>>>>>> But there is a consideration to remove the old option > in > >>>>> Flink > >>>>>>>>> 2.0. > >>>>>>>>>>>>>>>>>>> 3. We can provide more options to disable other source > >>>>>>> abilities > >>>>>>>>>>>> with > >>>>>>>>>>>>>>>>> side > >>>>>>>>>>>>>>>>>>> effects, such as “source.aggregate.enabled” and > >>>>>>>>>>>>>>>>> “source.projection.enabled" > >>>>>>>>>>>>>>>>>>> This is not urgent and can be continuously introduced. > >>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>> Looking forward to your feedback again. > >>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>> Best, > >>>>>>>>>>>>>>>>>>> Jiabao > >>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>> 2023年10月29日 08:45，Becket Qin <becket....@gmail.com> > 写道： > >>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>> Thanks for digging into the git history, Jark. I agree > >> it > >>>>>>> makes > >>>>>>>>>>>>>> sense > >>>>>>>>>>>>>>>>> to > >>>>>>>>>>>>>>>>>>>> deprecate this API in 2.0. > >>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>> Cheers, > >>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>> Jiangjie (Becket) Qin > >>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>> On Fri, Oct 27, 2023 at 5:47 PM Jark Wu < > >> imj...@gmail.com> > >>>>>>>>> wrote: > >>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>> Hi Becket, > >>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>> I checked the history of " > >>>>>>>>>>>>>>>>>>>>> *table.optimizer.source.predicate-pushdown-enabled*", > >>>>>>>>>>>>>>>>>>>>> it seems it was introduced since the legacy > >>>>>>>>> FilterableTableSource > >>>>>>>>>>>>>>>>>>>>> interface > >>>>>>>>>>>>>>>>>>>>> which might be an experiential feature at that time. > I > >>>>> don't > >>>>>>>>> see > >>>>>>>>>>>>>> the > >>>>>>>>>>>>>>>>>>>>> necessity > >>>>>>>>>>>>>>>>>>>>> of this option at the moment. Maybe we can deprecate > >> this > >>>>>>>>> option > >>>>>>>>>>>>>> and > >>>>>>>>>>>>>>>>>>> drop > >>>>>>>>>>>>>>>>>>>>> it > >>>>>>>>>>>>>>>>>>>>> in Flink 2.0[1] if it is not necessary anymore. This > >> may > >>>>>>> help > >>>>>>>>> to > >>>>>>>>>>>>>>>>>>>>> simplify this discussion. > >>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>> Best, > >>>>>>>>>>>>>>>>>>>>> Jark > >>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>> [1]: > https://issues.apache.org/jira/browse/FLINK-32383 > >>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>> On Thu, 26 Oct 2023 at 10:14, Becket Qin < > >>>>>>>>> becket....@gmail.com> > >>>>>>>>>>>>>>>>> wrote: > >>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>> Thanks for the proposal, Jiabao. My two cents below: > >>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>> 1. If I understand correctly, the motivation of the > >> FLIP > >>>>> is > >>>>>>>>>>>>>> mainly to > >>>>>>>>>>>>>>>>>>>>>> make predicate pushdown optional on SOME of the > >> Sources. > >>>>> If > >>>>>>>>> so, > >>>>>>>>>>>>>>>>>>> intuitively > >>>>>>>>>>>>>>>>>>>>>> the configuration should be Source specific instead > of > >>>>>>>>> general. > >>>>>>>>>>>>>>>>>>> Otherwise, > >>>>>>>>>>>>>>>>>>>>>> we will end up with general configurations that may > >> not > >>>>>>> take > >>>>>>>>>>>>>> effect > >>>>>>>>>>>>>>>>> for > >>>>>>>>>>>>>>>>>>>>>> some of the Source implementations. This violates > the > >>>>> basic > >>>>>>>>> rule > >>>>>>>>>>>>>> of a > >>>>>>>>>>>>>>>>>>>>>> configuration - it does what it says, regardless of > >> the > >>>>>>>>>>>>>>>>> implementation. > >>>>>>>>>>>>>>>>>>>>>> While configuration standardization is usually a > good > >>>>>>> thing, > >>>>>>>>> it > >>>>>>>>>>>>>>>>> should > >>>>>>>>>>>>>>>>>>> not > >>>>>>>>>>>>>>>>>>>>>> break the basic rules. > >>>>>>>>>>>>>>>>>>>>>> If we really want to have this general > configuration, > >> for > >>>>>>> the > >>>>>>>>>>>>>> sources > >>>>>>>>>>>>>>>>>>>>>> this configuration does not apply, they should throw > >> an > >>>>>>>>>>>> exception > >>>>>>>>>>>>>> to > >>>>>>>>>>>>>>>>>>> make > >>>>>>>>>>>>>>>>>>>>>> it clear that this configuration is not supported. > >>>>> However, > >>>>>>>>> that > >>>>>>>>>>>>>>>>> seems > >>>>>>>>>>>>>>>>>>> ugly. > >>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>> 2. I think the actual motivation of this FLIP is > about > >>>>>>> "how a > >>>>>>>>>>>>>> source > >>>>>>>>>>>>>>>>>>>>>> should implement predicate pushdown efficiently", > not > >>>>>>>>> "whether > >>>>>>>>>>>>>>>>>>> predicate > >>>>>>>>>>>>>>>>>>>>>> pushdown should be applied to the source." For > >> example, > >>>>> if > >>>>>>> a > >>>>>>>>>>>>>> source > >>>>>>>>>>>>>>>>>>> wants > >>>>>>>>>>>>>>>>>>>>>> to avoid additional computing load in the external > >>>>> system, > >>>>>>> it > >>>>>>>>>>>> can > >>>>>>>>>>>>>>>>>>> always > >>>>>>>>>>>>>>>>>>>>>> read the entire record and apply the predicates by > >>>>> itself. > >>>>>>>>>>>>>> However, > >>>>>>>>>>>>>>>>>>> from > >>>>>>>>>>>>>>>>>>>>>> the Flink perspective, the predicate pushdown is > >> applied, > >>>>>>> it > >>>>>>>>> is > >>>>>>>>>>>>>> just > >>>>>>>>>>>>>>>>>>>>>> implemented differently by the source. So the design > >>>>>>>>> principle > >>>>>>>>>>>>>> here > >>>>>>>>>>>>>>>>> is > >>>>>>>>>>>>>>>>>>> that > >>>>>>>>>>>>>>>>>>>>>> Flink only cares about whether a source supports > >>>>> predicate > >>>>>>>>>>>>>> pushdown > >>>>>>>>>>>>>>>>> or > >>>>>>>>>>>>>>>>>>> not, > >>>>>>>>>>>>>>>>>>>>>> it does not care about the implementation > efficiency / > >>>>> side > >>>>>>>>>>>>>> effect of > >>>>>>>>>>>>>>>>>>> the > >>>>>>>>>>>>>>>>>>>>>> predicates pushdown. It is the Source > implementation's > >>>>>>>>>>>>>> responsibility > >>>>>>>>>>>>>>>>>>> to > >>>>>>>>>>>>>>>>>>>>>> ensure the predicates pushdown is implemented > >> efficiently > >>>>>>> and > >>>>>>>>>>>> does > >>>>>>>>>>>>>>>>> not > >>>>>>>>>>>>>>>>>>>>>> impose excessive pressure on the external system. > And > >> it > >>>>> is > >>>>>>>>> OK > >>>>>>>>>>>> to > >>>>>>>>>>>>>>>>> have > >>>>>>>>>>>>>>>>>>>>>> additional configurations to achieve this goal. > >>>>> Obviously, > >>>>>>>>> such > >>>>>>>>>>>>>>>>>>>>>> configurations will be source specific in this case. > >>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>> 3. Regarding the existing configurations of > >>>>>>>>>>>>>>>>>>> *table.optimizer.source.predicate-pushdown-enabled. > >>>>>>>>>>>>>>>>>>>>>> *I am not sure why we need it. Supposedly, if a > source > >>>>>>>>>>>> implements > >>>>>>>>>>>>>> a > >>>>>>>>>>>>>>>>>>>>>> SupportsXXXPushDown interface, the optimizer should > >> push > >>>>>>> the > >>>>>>>>>>>>>>>>>>> corresponding > >>>>>>>>>>>>>>>>>>>>>> predicates to the Source. I am not sure in which > case > >>>>> this > >>>>>>>>>>>>>>>>>>> configuration > >>>>>>>>>>>>>>>>>>>>>> would be used. Any ideas @Jark Wu <imj...@gmail.com > >? > >>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>> Thanks, > >>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>> Jiangjie (Becket) Qin > >>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>> On Wed, Oct 25, 2023 at 11:55 PM Jiabao Sun > >>>>>>>>>>>>>>>>>>>>>> <jiabao....@xtransfer.cn.invalid> wrote: > >>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>> Thanks Jane for the detailed explanation. > >>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>> I think that for users, we should respect > conventions > >>>>> over > >>>>>>>>>>>>>>>>>>>>>>> configurations. > >>>>>>>>>>>>>>>>>>>>>>> Conventions can be default values explicitly > >> specified > >>>>> in > >>>>>>>>>>>>>>>>>>>>>>> configurations, or they can be behaviors that > follow > >>>>>>>>> previous > >>>>>>>>>>>>>>>>>>> versions. > >>>>>>>>>>>>>>>>>>>>>>> If the same code has different behaviors in > different > >>>>>>>>> versions, > >>>>>>>>>>>>>> it > >>>>>>>>>>>>>>>>>>> would > >>>>>>>>>>>>>>>>>>>>>>> be a very bad thing. > >>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>> I agree that for regular users, it is not necessary > >> to > >>>>>>>>>>>> understand > >>>>>>>>>>>>>>>>> all > >>>>>>>>>>>>>>>>>>>>>>> the configurations related to Flink. > >>>>>>>>>>>>>>>>>>>>>>> By following conventions, they can have a good > >>>>> experience. > >>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>> Let's get back to the practical situation and > >> consider > >>>>> it. > >>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>> Case 1: > >>>>>>>>>>>>>>>>>>>>>>> The user is not familiar with the purpose of the > >>>>>>>>>>>>>>>>>>>>>>> table.optimizer.source.predicate-pushdown-enabled > >>>>>>>>> configuration > >>>>>>>>>>>>>> but > >>>>>>>>>>>>>>>>>>> follows > >>>>>>>>>>>>>>>>>>>>>>> the convention of allowing predicate pushdown to > the > >>>>>>> source > >>>>>>>>> by > >>>>>>>>>>>>>>>>>>> default. > >>>>>>>>>>>>>>>>>>>>>>> Just understanding the > >> source.predicate-pushdown-enabled > >>>>>>>>>>>>>>>>> configuration > >>>>>>>>>>>>>>>>>>>>>>> and performing fine-grained toggle control will > work > >>>>> well. > >>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>> Case 2: > >>>>>>>>>>>>>>>>>>>>>>> The user understands the meaning of the > >>>>>>>>>>>>>>>>>>>>>>> table.optimizer.source.predicate-pushdown-enabled > >>>>>>>>> configuration > >>>>>>>>>>>>>> and > >>>>>>>>>>>>>>>>>>> has set > >>>>>>>>>>>>>>>>>>>>>>> its value to false. > >>>>>>>>>>>>>>>>>>>>>>> We have reason to believe that the user understands > >> the > >>>>>>>>> meaning > >>>>>>>>>>>>>> of > >>>>>>>>>>>>>>>>> the > >>>>>>>>>>>>>>>>>>>>>>> predicate pushdown configuration and the intention > >> is to > >>>>>>>>>>>> disable > >>>>>>>>>>>>>>>>>>> predicate > >>>>>>>>>>>>>>>>>>>>>>> pushdown (rather than whether or not to allow it). > >>>>>>>>>>>>>>>>>>>>>>> The previous choice of globally disabling it is > >> likely > >>>>>>>>> because > >>>>>>>>>>>> it > >>>>>>>>>>>>>>>>>>>>>>> couldn't be disabled on individual sources. > >>>>>>>>>>>>>>>>>>>>>>> From this perspective, if we provide more > >> fine-grained > >>>>>>>>>>>>>> configuration > >>>>>>>>>>>>>>>>>>>>>>> support and provide detailed explanations of the > >>>>>>>>> configuration > >>>>>>>>>>>>>>>>>>> behaviors in > >>>>>>>>>>>>>>>>>>>>>>> the documentation, > >>>>>>>>>>>>>>>>>>>>>>> users can clearly understand the differences > between > >>>>> these > >>>>>>>>> two > >>>>>>>>>>>>>>>>>>>>>>> configurations and use them correctly. > >>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>> Also, I don't agree that > >>>>>>>>>>>>>>>>>>>>>>> table.optimizer.source.predicate-pushdown-enabled = > >> true > >>>>>>> and > >>>>>>>>>>>>>>>>>>>>>>> source.predicate-pushdown-enabled = false means > that > >> the > >>>>>>>>> local > >>>>>>>>>>>>>>>>>>>>>>> configuration overrides the global configuration. > >>>>>>>>>>>>>>>>>>>>>>> On the contrary, both configurations are > functioning > >>>>>>>>> correctly. > >>>>>>>>>>>>>>>>>>>>>>> The optimizer allows predicate pushdown to all > >> sources, > >>>>>>> but > >>>>>>>>>>>> some > >>>>>>>>>>>>>>>>>>> sources > >>>>>>>>>>>>>>>>>>>>>>> can reject the filters pushed down by the > optimizer. > >>>>>>>>>>>>>>>>>>>>>>> This is natural, just like different components at > >>>>>>> different > >>>>>>>>>>>>>> levels > >>>>>>>>>>>>>>>>>>> are > >>>>>>>>>>>>>>>>>>>>>>> responsible for different tasks. > >>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>> The more serious issue is that if > >>>>>>>>>>>>>>>>> "source.predicate-pushdown-enabled" > >>>>>>>>>>>>>>>>>>>>>>> does not respect > >>>>>>>>>>>>>>>>> "table.optimizer.source.predicate-pushdown-enabled”, > >>>>>>>>>>>>>>>>>>>>>>> the > >> "table.optimizer.source.predicate-pushdown-enabled" > >>>>>>>>>>>>>>>>> configuration > >>>>>>>>>>>>>>>>>>>>>>> will be invalidated. > >>>>>>>>>>>>>>>>>>>>>>> This means that regardless of whether > >>>>>>>>>>>>>>>>>>>>>>> "table.optimizer.source.predicate-pushdown-enabled" > >> is > >>>>> set > >>>>>>>>> to > >>>>>>>>>>>>>> true > >>>>>>>>>>>>>>>>> or > >>>>>>>>>>>>>>>>>>>>>>> false, it will have no effect. > >>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>> Best, > >>>>>>>>>>>>>>>>>>>>>>> Jiabao > >>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>> 2023年10月25日 22:24，Jane Chan < > qingyue....@gmail.com> > >>>>> 写道： > >>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>> Hi Jiabao, > >>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>> Thanks for the in-depth clarification. Here are my > >>>>> cents > >>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>> However, > >>>>>>>>> "table.optimizer.source.predicate-pushdown-enabled" > >>>>>>>>>>>> and > >>>>>>>>>>>>>>>>>>>>>>>>> "scan.filter-push-down.enabled" are > configurations > >> for > >>>>>>>>>>>>>> different > >>>>>>>>>>>>>>>>>>>>>>>>> components(optimizer and source operator). > >>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>> We cannot assume that every user would be > >> interested in > >>>>>>>>>>>>>>>>> understanding > >>>>>>>>>>>>>>>>>>>>>>> the > >>>>>>>>>>>>>>>>>>>>>>>> internal components of Flink, such as the > optimizer > >> or > >>>>>>>>>>>>>> connectors, > >>>>>>>>>>>>>>>>>>> and > >>>>>>>>>>>>>>>>>>>>>>> the > >>>>>>>>>>>>>>>>>>>>>>>> specific configurations associated with each > >> component. > >>>>>>>>>>>> Instead, > >>>>>>>>>>>>>>>>>>> users > >>>>>>>>>>>>>>>>>>>>>>>> might be more concerned about knowing which > >>>>> configuration > >>>>>>>>>>>>>> enables > >>>>>>>>>>>>>>>>> or > >>>>>>>>>>>>>>>>>>>>>>>> disables the filter push-down feature for all > source > >>>>>>>>>>>> connectors, > >>>>>>>>>>>>>>>>> and > >>>>>>>>>>>>>>>>>>>>>>> which > >>>>>>>>>>>>>>>>>>>>>>>> parameter provides the flexibility to override > this > >>>>>>>>> behavior > >>>>>>>>>>>>>> for a > >>>>>>>>>>>>>>>>>>>>>>> single > >>>>>>>>>>>>>>>>>>>>>>>> source if needed. > >>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>> So, from this perspective, I am inclined to divide > >>>>> these > >>>>>>>>> two > >>>>>>>>>>>>>>>>>>> parameters > >>>>>>>>>>>>>>>>>>>>>>>> based on the scope of their impact from the user's > >>>>>>>>> perspective > >>>>>>>>>>>>>>>>> (i.e. > >>>>>>>>>>>>>>>>>>>>>>>> global-level or operator-level), rather than > >>>>> categorizing > >>>>>>>>> them > >>>>>>>>>>>>>>>>> based > >>>>>>>>>>>>>>>>>>>>>>> on the > >>>>>>>>>>>>>>>>>>>>>>>> component hierarchy from a developer's point of > >> view. > >>>>>>>>>>>> Therefore, > >>>>>>>>>>>>>>>>>>> based > >>>>>>>>>>>>>>>>>>>>>>> on > >>>>>>>>>>>>>>>>>>>>>>>> this premise, it is intuitive and natural for > users > >> to > >>>>>>>>>>>>>>>>>>>>>>>> understand fine-grained configuration options can > >>>>>>> override > >>>>>>>>>>>>>> global > >>>>>>>>>>>>>>>>>>>>>>>> configurations. > >>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>> Additionally, if "scan.filter-push-down.enabled" > >>>>> doesn't > >>>>>>>>>>>>>> respect to > >>>>>>>>>>>>>>>>>>>>>>>>> > "table.optimizer.source.predicate-pushdown-enabled" > >>>>> and > >>>>>>>>> the > >>>>>>>>>>>>>>>>> default > >>>>>>>>>>>>>>>>>>>>>>> value > >>>>>>>>>>>>>>>>>>>>>>>>> of "scan.filter-push-down.enabled" is defined as > >> true, > >>>>>>>>>>>>>>>>>>>>>>>>> it means that just modifying > >>>>>>>>>>>>>>>>>>>>>>>>> > >> "table.optimizer.source.predicate-pushdown-enabled" as > >>>>>>>>> false > >>>>>>>>>>>>>> will > >>>>>>>>>>>>>>>>>>>>>>> have no > >>>>>>>>>>>>>>>>>>>>>>>>> effect, and filter pushdown will still be > >> performed. > >>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>> If we define the default value of > >>>>>>>>>>>>>> "scan.filter-push-down.enabled" > >>>>>>>>>>>>>>>>> as > >>>>>>>>>>>>>>>>>>>>>>>>> false, it would introduce a difference in > behavior > >>>>>>>>> compared > >>>>>>>>>>>> to > >>>>>>>>>>>>>> the > >>>>>>>>>>>>>>>>>>>>>>> previous > >>>>>>>>>>>>>>>>>>>>>>>>> version. > >>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>> <1>If I understand correctly, > >>>>>>>>> "scan.filter-push-down.enabled" > >>>>>>>>>>>>>> is a > >>>>>>>>>>>>>>>>>>>>>>>> connector option, which means the only way to > >> configure > >>>>>>> it > >>>>>>>>> is > >>>>>>>>>>>> to > >>>>>>>>>>>>>>>>>>>>>>> explicitly > >>>>>>>>>>>>>>>>>>>>>>>> specify it in DDL (no matter whether disable or > >>>>> enable), > >>>>>>>>> and > >>>>>>>>>>>> the > >>>>>>>>>>>>>>>>> SET > >>>>>>>>>>>>>>>>>>>>>>>> command is not applicable, so I think it's natural > >> to > >>>>>>> still > >>>>>>>>>>>>>> respect > >>>>>>>>>>>>>>>>>>>>>>> user's > >>>>>>>>>>>>>>>>>>>>>>>> specification here. Otherwise, users might be more > >>>>>>> confused > >>>>>>>>>>>>>> about > >>>>>>>>>>>>>>>>> why > >>>>>>>>>>>>>>>>>>>>>>> the > >>>>>>>>>>>>>>>>>>>>>>>> DDL does not work as expected, and the reason is > >> just > >>>>>>>>> because > >>>>>>>>>>>>>> some > >>>>>>>>>>>>>>>>>>>>>>> other > >>>>>>>>>>>>>>>>>>>>>>>> "optimizer" configuration is set to a different > >> value. > >>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>> <2> From the implementation side, I am inclined to > >> keep > >>>>>>> the > >>>>>>>>>>>>>>>>>>> parameter's > >>>>>>>>>>>>>>>>>>>>>>>> priority consistent for all conditions. > >>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>> Let "global" denote > >>>>>>>>>>>>>>>>>>>>>>> > "table.optimizer.source.predicate-pushdown-enabled", > >>>>>>>>>>>>>>>>>>>>>>>> and let "per-source" denote > >>>>>>> "scan.filter-push-down.enabled" > >>>>>>>>>>>> for > >>>>>>>>>>>>>>>>>>>>>>> specific > >>>>>>>>>>>>>>>>>>>>>>>> source T, the following Truth table (based on the > >>>>>>> current > >>>>>>>>>>>>>> design) > >>>>>>>>>>>>>>>>>>>>>>>> indicates the inconsistent behavior for > "per-source > >>>>>>>>> override > >>>>>>>>>>>>>>>>> global". > >>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>> .------------.---------------.------------------- > >>>>>>>>>>>>>>>>>>>>>>>> ----.-------------------------------------. > >>>>>>>>>>>>>>>>>>>>>>>> | global | per-source | push-down for T | > >> per-source > >>>>>>>>>>>> override > >>>>>>>>>>>>>>>>>>> global > >>>>>>>>>>>>>>>>>>>>>>> | > >>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>> > >>>>>>>>>>>> > >>>>>>>>> > >>>>>>> > >>>>> > >> > :-----------+--------------+-----------------------+------------------------------------: > >>>>>>>>>>>>>>>>>>>>>>>> | true | false | false > >>>>>>> | Y > >>>>>>>>>>>>>>>>>>>>>>>> | > >>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>> > >>>>>>>>>>>> > >>>>>>>>> > >>>>>>> > >>>>> > >> > :-----------+--------------+-----------------------+------------------------------------: > >>>>>>>>>>>>>>>>>>>>>>>> | false | true | false > >>>>>>> | N > >>>>>>>>>>>>>>>>>>>>>>>> | > >>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>> > >>>>>>>>>>>> > >>>>>>>>> > >>>>>>> > >>>>> > >> > .------------.---------------.-----------------------.-------------------------------------. > >>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>> Best, > >>>>>>>>>>>>>>>>>>>>>>>> Jane > >>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>> On Wed, Oct 25, 2023 at 6:22 PM Jiabao Sun < > >>>>>>>>>>>>>>>>> jiabao....@xtransfer.cn > >>>>>>>>>>>>>>>>>>>>>>> .invalid> > >>>>>>>>>>>>>>>>>>>>>>>> wrote: > >>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>> Thanks Benchao for the feedback. > >>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>> I understand that the configuration of global > >>>>>>> parallelism > >>>>>>>>> and > >>>>>>>>>>>>>> task > >>>>>>>>>>>>>>>>>>>>>>>>> parallelism is at different granularities but > with > >> the > >>>>>>>>> same > >>>>>>>>>>>>>>>>>>>>>>> configuration. > >>>>>>>>>>>>>>>>>>>>>>>>> However, > >>>>>>>>> "table.optimizer.source.predicate-pushdown-enabled" > >>>>>>>>>>>>>> and > >>>>>>>>>>>>>>>>>>>>>>>>> "scan.filter-push-down.enabled" are > configurations > >> for > >>>>>>>>>>>>>> different > >>>>>>>>>>>>>>>>>>>>>>>>> components(optimizer and source operator). > >>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>> From a user's perspective, there are two > scenarios: > >>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>> 1. Disabling all filter pushdown > >>>>>>>>>>>>>>>>>>>>>>>>> In this case, setting > >>>>>>>>>>>>>>>>>>>>>>> "table.optimizer.source.predicate-pushdown-enabled" > >>>>>>>>>>>>>>>>>>>>>>>>> to false is sufficient to meet the requirement. > >>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>> 2. Disabling filter pushdown for specific sources > >>>>>>>>>>>>>>>>>>>>>>>>> In this scenario, there is no need to adjust the > >> value > >>>>>>> of > >>>>>>>>>>>>>>>>>>>>>>>>> > >> "table.optimizer.source.predicate-pushdown-enabled". > >>>>>>>>>>>>>>>>>>>>>>>>> Instead, the focus should be on the configuration > >> of > >>>>>>>>>>>>>>>>>>>>>>>>> "scan.filter-push-down.enabled" to meet the > >>>>> requirement. > >>>>>>>>>>>>>>>>>>>>>>>>> In this case, users do not need to set > >>>>>>>>>>>>>>>>>>>>>>>>> > >> "table.optimizer.source.predicate-pushdown-enabled" to > >>>>>>>>> false > >>>>>>>>>>>>>> and > >>>>>>>>>>>>>>>>>>>>>>> manually > >>>>>>>>>>>>>>>>>>>>>>>>> enable filter pushdown for specific sources. > >>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>> Additionally, if "scan.filter-push-down.enabled" > >>>>> doesn't > >>>>>>>>>>>>>> respect > >>>>>>>>>>>>>>>>> to > >>>>>>>>>>>>>>>>>>>>>>>>> > "table.optimizer.source.predicate-pushdown-enabled" > >>>>> and > >>>>>>>>> the > >>>>>>>>>>>>>>>>> default > >>>>>>>>>>>>>>>>>>>>>>> value > >>>>>>>>>>>>>>>>>>>>>>>>> of "scan.filter-push-down.enabled" is defined as > >> true, > >>>>>>>>>>>>>>>>>>>>>>>>> it means that just modifying > >>>>>>>>>>>>>>>>>>>>>>>>> > >> "table.optimizer.source.predicate-pushdown-enabled" as > >>>>>>>>> false > >>>>>>>>>>>>>> will > >>>>>>>>>>>>>>>>>>>>>>> have no > >>>>>>>>>>>>>>>>>>>>>>>>> effect, and filter pushdown will still be > >> performed. > >>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>> If we define the default value of > >>>>>>>>>>>>>> "scan.filter-push-down.enabled" > >>>>>>>>>>>>>>>>> as > >>>>>>>>>>>>>>>>>>>>>>>>> false, it would introduce a difference in > behavior > >>>>>>>>> compared > >>>>>>>>>>>> to > >>>>>>>>>>>>>> the > >>>>>>>>>>>>>>>>>>>>>>> previous > >>>>>>>>>>>>>>>>>>>>>>>>> version. > >>>>>>>>>>>>>>>>>>>>>>>>> The same SQL query that could successfully push > >> down > >>>>>>>>> filters > >>>>>>>>>>>> in > >>>>>>>>>>>>>>>>> the > >>>>>>>>>>>>>>>>>>>>>>> old > >>>>>>>>>>>>>>>>>>>>>>>>> version but would no longer do so after the > >> upgrade. > >>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>> Best, > >>>>>>>>>>>>>>>>>>>>>>>>> Jiabao > >>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>> 2023年10月25日 17:10，Benchao Li < > >> libenc...@apache.org> > >>>>>>> 写道： > >>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>> Thanks Jiabao for the detailed explanations, > that > >>>>>>> helps a > >>>>>>>>>>>>>> lot, I > >>>>>>>>>>>>>>>>>>>>>>>>>> understand your rationale now. > >>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>> Correct me if I'm wrong. Your perspective is > from > >>>>>>>>>>>> "developer", > >>>>>>>>>>>>>>>>>>> which > >>>>>>>>>>>>>>>>>>>>>>>>>> means there is an optimizer and connector > >> component, > >>>>>>> and > >>>>>>>>> if > >>>>>>>>>>>> we > >>>>>>>>>>>>>>>>> want > >>>>>>>>>>>>>>>>>>>>>>> to > >>>>>>>>>>>>>>>>>>>>>>>>>> enable this feature (pushing filters down into > >>>>>>>>> connectors), > >>>>>>>>>>>>>> you > >>>>>>>>>>>>>>>>>>> must > >>>>>>>>>>>>>>>>>>>>>>>>>> enable it firstly in optimizer, and only then > >>>>> connector > >>>>>>>>> has > >>>>>>>>>>>>>> the > >>>>>>>>>>>>>>>>>>>>>>> chance > >>>>>>>>>>>>>>>>>>>>>>>>>> to decide to use it or not. > >>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>> My perspective is from "user" that (Why a user > >> should > >>>>>>>>> care > >>>>>>>>>>>>>> about > >>>>>>>>>>>>>>>>>>> the > >>>>>>>>>>>>>>>>>>>>>>>>>> difference of optimizer/connector) , this is a > >>>>> feature, > >>>>>>>>> and > >>>>>>>>>>>>>> has > >>>>>>>>>>>>>>>>> two > >>>>>>>>>>>>>>>>>>>>>>>>>> way to control it, one way is to config it > >> job-level, > >>>>>>> the > >>>>>>>>>>>>>> other > >>>>>>>>>>>>>>>>> one > >>>>>>>>>>>>>>>>>>>>>>> is > >>>>>>>>>>>>>>>>>>>>>>>>>> in table properties. What a user expects is that > >> they > >>>>>>> can > >>>>>>>>>>>>>>>>> control a > >>>>>>>>>>>>>>>>>>>>>>>>>> feature in a tiered way, that setting it per > job, > >> and > >>>>>>>>> then > >>>>>>>>>>>>>>>>>>>>>>>>>> fine-grained tune it per table. > >>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>> This is some kind of similar to other concepts, > >> such > >>>>> as > >>>>>>>>>>>>>>>>>>> parallelism, > >>>>>>>>>>>>>>>>>>>>>>>>>> users can set a job level default parallelism, > and > >>>>> then > >>>>>>>>>>>>>>>>>>> fine-grained > >>>>>>>>>>>>>>>>>>>>>>>>>> tune it per operator. There may be more such > >> debate > >>>>> in > >>>>>>>>> the > >>>>>>>>>>>>>> future > >>>>>>>>>>>>>>>>>>>>>>>>>> e.g., we can have a job level config about > adding > >>>>>>> key-by > >>>>>>>>>>>>>> before > >>>>>>>>>>>>>>>>>>>>>>> lookup > >>>>>>>>>>>>>>>>>>>>>>>>>> join, and also a hint/table property way to > >>>>>>> fine-grained > >>>>>>>>>>>>>> control > >>>>>>>>>>>>>>>>> it > >>>>>>>>>>>>>>>>>>>>>>>>>> per lookup operator. Hence we'd better find a > >> unified > >>>>>>> way > >>>>>>>>>>>> for > >>>>>>>>>>>>>> all > >>>>>>>>>>>>>>>>>>>>>>>>>> those similar kind of features. > >>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>> Jiabao Sun <jiabao....@xtransfer.cn.invalid> > >>>>>>>>> 于2023年10月25日周三 > >>>>>>>>>>>>>>>>>>> 15:27写道： > >>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks Jane for further explanation. > >>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>> These two configurations correspond to > different > >>>>>>> levels. > >>>>>>>>>>>>>>>>>>>>>>>>> "scan.filter-push-down.enabled" does not make > >>>>>>>>>>>>>>>>>>>>>>>>> "table.optimizer.source.predicate" invalid. > >>>>>>>>>>>>>>>>>>>>>>>>>>> The planner will still push down predicates to > >> all > >>>>>>>>> sources. > >>>>>>>>>>>>>>>>>>>>>>>>>>> Whether filter pushdown is allowed or not is > >>>>>>> determined > >>>>>>>>> by > >>>>>>>>>>>>>> the > >>>>>>>>>>>>>>>>>>>>>>> specific > >>>>>>>>>>>>>>>>>>>>>>>>> source's "scan.filter-push-down.enabled" > >>>>> configuration. > >>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>> However, "table.optimizer.source.predicate" > does > >>>>>>>>> directly > >>>>>>>>>>>>>> affect > >>>>>>>>>>>>>>>>>>>>>>>>> "scan.filter-push-down.enabled”. > >>>>>>>>>>>>>>>>>>>>>>>>>>> When the planner disables predicate pushdown, > the > >>>>>>>>>>>>>> source-level > >>>>>>>>>>>>>>>>>>>>>>> filter > >>>>>>>>>>>>>>>>>>>>>>>>> pushdown will also not be executed, even if the > >> source > >>>>>>>>> allows > >>>>>>>>>>>>>>>>> filter > >>>>>>>>>>>>>>>>>>>>>>>>> pushdown. > >>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>> Whatever, in point 1 and 2, our expectation is > >>>>>>>>> consistent. > >>>>>>>>>>>>>>>>>>>>>>>>>>> For the 3rd point, I still think that the > >>>>>>> planner-level > >>>>>>>>>>>>>>>>>>>>>>> configuration > >>>>>>>>>>>>>>>>>>>>>>>>> takes precedence over the source-level > >> configuration. > >>>>>>>>>>>>>>>>>>>>>>>>>>> It may seem counterintuitive when we globally > >>>>> disable > >>>>>>>>>>>>>> predicate > >>>>>>>>>>>>>>>>>>>>>>>>> pushdown but allow filter pushdown at the source > >>>>> level. > >>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>> Best, > >>>>>>>>>>>>>>>>>>>>>>>>>>> Jiabao > >>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> 2023年10月25日 14:35，Jane Chan < > >> qingyue....@gmail.com > >>>>>> > >>>>>>>>> 写道： > >>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Jiabao, > >>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks for clarifying this. While by > >>>>>>>>>>>>>>>>>>> "scan.filter-push-down.enabled > >>>>>>>>>>>>>>>>>>>>>>>>> takes a > >>>>>>>>>>>>>>>>>>>>>>>>>>>> higher priority" I meant that this value > should > >> be > >>>>>>>>>>>> respected > >>>>>>>>>>>>>>>>>>>>>>> whenever > >>>>>>>>>>>>>>>>>>>>>>>>> it is > >>>>>>>>>>>>>>>>>>>>>>>>>>>> set explicitly. > >>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> The conclusion that > >>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> 2. "table.optimizer.source.predicate" = "true" > >> and > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> "scan.filter-push-down.enabled" = "false" > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Allow the planner to perform predicate > >> pushdown, > >>>>> but > >>>>>>>>>>>>>>>>> individual > >>>>>>>>>>>>>>>>>>>>>>>>> sources do > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> not enable filter pushdown. > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> This indicates that the option > >>>>>>>>>>>>>> "scan.filter-push-down.enabled = > >>>>>>>>>>>>>>>>>>>>>>> false" > >>>>>>>>>>>>>>>>>>>>>>>>> for > >>>>>>>>>>>>>>>>>>>>>>>>>>>> an individual source connector does indeed > >> override > >>>>>>> the > >>>>>>>>>>>>>>>>>>>>>>> global-level > >>>>>>>>>>>>>>>>>>>>>>>>>>>> planner settings to make a difference. And > thus > >>>>> "has > >>>>>>> a > >>>>>>>>>>>>>> higher > >>>>>>>>>>>>>>>>>>>>>>>>> priority". > >>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> While for > >>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> 3. "table.optimizer.source.predicate" = > "false" > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Predicate pushdown is not allowed for the > >> planner. > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Regardless of the value of the > >>>>>>>>>>>>>> "scan.filter-push-down.enabled" > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> configuration, filter pushdown is disabled. > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> In this scenario, the behavior remains > >> consistent > >>>>>>> with > >>>>>>>>>>>> the > >>>>>>>>>>>>>> old > >>>>>>>>>>>>>>>>>>>>>>>>> version as > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> well. > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> I still think "scan.filter-push-down.enabled" > >>>>> should > >>>>>>>>> also > >>>>>>>>>>>> be > >>>>>>>>>>>>>>>>>>>>>>> respected > >>>>>>>>>>>>>>>>>>>>>>>>> if > >>>>>>>>>>>>>>>>>>>>>>>>>>>> it is enabled for individual connectors. WDYT? > >>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> Best, > >>>>>>>>>>>>>>>>>>>>>>>>>>>> Jane > >>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Oct 25, 2023 at 1:27 PM Jiabao Sun < > >>>>>>>>>>>>>>>>>>>>>>> jiabao....@xtransfer.cn > >>>>>>>>>>>>>>>>>>>>>>>>> .invalid> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote: > >>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks Benchao for the feedback. > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> For the current proposal, we recommend > keeping > >> the > >>>>>>>>>>>> default > >>>>>>>>>>>>>>>>> value > >>>>>>>>>>>>>>>>>>>>>>> of > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> "table.optimizer.source.predicate" as true, > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> and setting the the default value of newly > >>>>>>> introduced > >>>>>>>>>>>>>> option > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> "scan.filter-push-down.enabled" to true as > >> well. > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> The main purpose of doing this is to maintain > >>>>>>>>> consistency > >>>>>>>>>>>>>> with > >>>>>>>>>>>>>>>>>>>>>>>>> previous > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> versions, as whether to perform > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> filter pushdown in the old version solely > >> depends > >>>>> on > >>>>>>>>> the > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> "table.optimizer.source.predicate" option. > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> That means by default, as long as a > TableSource > >>>>>>>>>>>> implements > >>>>>>>>>>>>>> the > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> SupportsFilterPushDown interface, filter > >> pushdown > >>>>> is > >>>>>>>>>>>>>> allowed. > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> And it seems that we don't have much benefit > in > >>>>>>>>> changing > >>>>>>>>>>>>>> the > >>>>>>>>>>>>>>>>>>>>>>> default > >>>>>>>>>>>>>>>>>>>>>>>>> value > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> of "table.optimizer.source.predicate" to > false. > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Regarding the priority of these two > >>>>> configurations, > >>>>>>> I > >>>>>>>>>>>>>> believe > >>>>>>>>>>>>>>>>>>> that > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> "table.optimizer.source.predicate" > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> takes precedence over > >>>>>>> "scan.filter-push-down.enabled" > >>>>>>>>> and > >>>>>>>>>>>>>> it > >>>>>>>>>>>>>>>>>>>>>>> exhibits > >>>>>>>>>>>>>>>>>>>>>>>>> the > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> following behavior. > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1. "table.optimizer.source.predicate" = > "true" > >> and > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> "scan.filter-push-down.enabled" = "true" > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> This is the default behavior, allowing filter > >>>>>>> pushdown > >>>>>>>>>>>> for > >>>>>>>>>>>>>>>>>>>>>>> sources. > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2. "table.optimizer.source.predicate" = > "true" > >> and > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> "scan.filter-push-down.enabled" = "false" > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Allow the planner to perform predicate > >> pushdown, > >>>>> but > >>>>>>>>>>>>>>>>> individual > >>>>>>>>>>>>>>>>>>>>>>>>> sources do > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> not enable filter pushdown. > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 3. "table.optimizer.source.predicate" = > "false" > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Predicate pushdown is not allowed for the > >> planner. > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Regardless of the value of the > >>>>>>>>>>>>>> "scan.filter-push-down.enabled" > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> configuration, filter pushdown is disabled. > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> In this scenario, the behavior remains > >> consistent > >>>>>>> with > >>>>>>>>>>>> the > >>>>>>>>>>>>>> old > >>>>>>>>>>>>>>>>>>>>>>>>> version as > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> well. > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> From an implementation perspective, setting > the > >>>>>>>>> priority > >>>>>>>>>>>> of > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> "scan.filter-push-down.enabled" higher than > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> "table.optimizer.source.predicate" is > >> difficult to > >>>>>>>>>>>> achieve > >>>>>>>>>>>>>>>>> now. > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Because the PushFilterIntoSourceScanRuleBase > at > >>>>> the > >>>>>>>>>>>> planner > >>>>>>>>>>>>>>>>>>> level > >>>>>>>>>>>>>>>>>>>>>>>>> takes > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> precedence over the source-level > >>>>> FilterPushDownSpec. > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Only when the > PushFilterIntoSourceScanRuleBase > >> is > >>>>>>>>>>>> enabled, > >>>>>>>>>>>>>>>>> will > >>>>>>>>>>>>>>>>>>>>>>> the > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Source-level filter pushdown be performed. > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Additionally, in my opinion, there doesn't > >> seem to > >>>>>>> be > >>>>>>>>>>>> much > >>>>>>>>>>>>>>>>>>>>>>> benefit in > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> setting a higher priority for > >>>>>>>>>>>>>> "scan.filter-push-down.enabled". > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> It may instead affect compatibility and > >> increase > >>>>>>>>>>>>>>>>> implementation > >>>>>>>>>>>>>>>>>>>>>>>>> complexity. > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> WDYT? > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Best, > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Jiabao > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2023年10月25日 11:56，Benchao Li < > >>>>> libenc...@apache.org > >>>>>>>> > >>>>>>>>> 写道： > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I agree with Jane that fine-grained > >>>>> configurations > >>>>>>>>>>>> should > >>>>>>>>>>>>>>>>> have > >>>>>>>>>>>>>>>>>>>>>>> higher > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> priority than job level configurations. > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> For current proposal, we can achieve that: > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> - Set "table.optimizer.source.predicate" = > >> "true" > >>>>>>> to > >>>>>>>>>>>>>> enable > >>>>>>>>>>>>>>>>> by > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> default, and set > >>>>> ""scan.filter-push-down.enabled" = > >>>>>>>>>>>>>> "false" > >>>>>>>>>>>>>>>>> to > >>>>>>>>>>>>>>>>>>>>>>>>> disable > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> it per table source > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> - Set "table.optimizer.source.predicate" = > >>>>> "false" > >>>>>>> to > >>>>>>>>>>>>>> disable > >>>>>>>>>>>>>>>>>>> by > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> default, and set > >>>>> ""scan.filter-push-down.enabled" = > >>>>>>>>>>>>>> "true" to > >>>>>>>>>>>>>>>>>>>>>>> enable > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> it per table source > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Jane Chan <qingyue....@gmail.com> > >> 于2023年10月24日周二 > >>>>>>>>>>>> 23:55写道： > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I believe that the configuration > >>>>>>>>>>>>>>>>>>>>>>> "table.optimizer.source.predicate" > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> has a > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> higher priority at the planner level than > >> the > >>>>>>>>>>>>>> configuration > >>>>>>>>>>>>>>>>>>> at > >>>>>>>>>>>>>>>>>>>>>>> the > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> source > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> level, > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> and it seems easy to implement now. > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Correct me if I'm wrong, but I think the > >>>>>>>>> fine-grained > >>>>>>>>>>>>>>>>>>>>>>> configuration > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "scan.filter-push-down.enabled" should > have a > >>>>>>> higher > >>>>>>>>>>>>>>>>> priority > >>>>>>>>>>>>>>>>>>>>>>>>> because > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> the > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> default value of > >>>>>>> "table.optimizer.source.predicate" > >>>>>>>>> is > >>>>>>>>>>>>>> true. > >>>>>>>>>>>>>>>>>>> As > >>>>>>>>>>>>>>>>>>>>>>> a > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> result, > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> turning off filter push-down for a specific > >>>>> source > >>>>>>>>> will > >>>>>>>>>>>>>> not > >>>>>>>>>>>>>>>>>>> take > >>>>>>>>>>>>>>>>>>>>>>>>> effect > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> unless the default value of > >>>>>>>>>>>>>>>>> "table.optimizer.source.predicate" > >>>>>>>>>>>>>>>>>>>>>>> is > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> changed > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to false, or, alternatively, let users > >> manually > >>>>>>> set > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "table.optimizer.source.predicate" to false > >>>>> first > >>>>>>>>> and > >>>>>>>>>>>>>> then > >>>>>>>>>>>>>>>>>>>>>>>>> selectively > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> enable filter push-down for the desired > >> sources, > >>>>>>>>> which > >>>>>>>>>>>> is > >>>>>>>>>>>>>>>>> less > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> intuitive. > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> WDYT? > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Best, > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Jane > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Tue, Oct 24, 2023 at 6:05 PM Jiabao Sun > < > >>>>>>>>>>>>>>>>>>>>>>> jiabao....@xtransfer.cn > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> .invalid> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote: > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks Jane, > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I believe that the configuration > >>>>>>>>>>>>>>>>>>>>>>> "table.optimizer.source.predicate" > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> has a > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> higher priority at the planner level than > >> the > >>>>>>>>>>>>>> configuration > >>>>>>>>>>>>>>>>>>> at > >>>>>>>>>>>>>>>>>>>>>>> the > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> source > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> level, > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> and it seems easy to implement now. > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Best, > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Jiabao > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2023年10月24日 17:36，Jane Chan < > >>>>>>>>> qingyue....@gmail.com> > >>>>>>>>>>>>>> 写道： > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Jiabao, > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks for driving this discussion. I > have > >> a > >>>>>>> small > >>>>>>>>>>>>>>>>> question > >>>>>>>>>>>>>>>>>>>>>>> that > >>>>>>>>>>>>>>>>>>>>>>>>> will > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "scan.filter-push-down.enabled" take > >>>>> precedence > >>>>>>>>> over > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "table.optimizer.source.predicate" when > the > >>>>> two > >>>>>>>>>>>>>> parameters > >>>>>>>>>>>>>>>>>>>>>>> might > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> conflict > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> each other? > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Best, > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Jane > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Tue, Oct 24, 2023 at 5:05 PM Jiabao > Sun > >> < > >>>>>>>>>>>>>>>>>>>>>>>>> jiabao....@xtransfer.cn > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> .invalid> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote: > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks Jark, > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> If we only add configuration without > >> adding > >>>>> the > >>>>>>>>>>>>>>>>>>>>>>>>> enableFilterPushDown > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> method in the SupportsFilterPushDown > >>>>> interface, > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> each connector would have to handle the > >> same > >>>>>>>>> logic > >>>>>>>>>>>> in > >>>>>>>>>>>>>> the > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> applyFilters > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> method to determine whether filter > >> pushdown > >>>>> is > >>>>>>>>>>>> needed. > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This would increase complexity and > violate > >>>>> the > >>>>>>>>>>>>>> original > >>>>>>>>>>>>>>>>>>>>>>> behavior > >>>>>>>>>>>>>>>>>>>>>>>>> of > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> the > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> applyFilters method. > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On the contrary, we only need to pass > the > >>>>>>>>>>>>>> configuration > >>>>>>>>>>>>>>>>>>>>>>>>> parameter in > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> the > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> newly added enableFilterPushDown method > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to decide whether to perform predicate > >>>>>>> pushdown. > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I think this approach would be clearer > and > >>>>>>>>> simpler. > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> WDYT? > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Best, > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Jiabao > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2023年10月24日 16:58，Jark Wu < > >> imj...@gmail.com > >>>>>> > >>>>>>>>> 写道： > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi JIabao, > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I think the current interface can > already > >>>>>>>>> satisfy > >>>>>>>>>>>>>> your > >>>>>>>>>>>>>>>>>>>>>>>>> requirements. > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> The connector can reject all the > filters > >> by > >>>>>>>>>>>> returning > >>>>>>>>>>>>>>>>> the > >>>>>>>>>>>>>>>>>>>>>>> input > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> filters > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> as `Result#remainingFilters`. > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> So maybe we don't need to introduce a > new > >>>>>>>>> method to > >>>>>>>>>>>>>>>>>>> disable > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> pushdown, but just introduce an option > >> for > >>>>> the > >>>>>>>>>>>>>> specific > >>>>>>>>>>>>>>>>>>>>>>>>> connector. > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Best, > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Jark > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Tue, 24 Oct 2023 at 16:38, Leonard > Xu > >> < > >>>>>>>>>>>>>>>>>>> xbjt...@gmail.com > >>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>> wrote: > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks @Jiabao for kicking off this > >>>>>>> discussion. > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Could you add a section to explain the > >>>>>>>>> difference > >>>>>>>>>>>>>>>>> between > >>>>>>>>>>>>>>>>>>>>>>>>> proposed > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> connector level config > >>>>>>>>>>>>>> `scan.filter-push-down.enabled` > >>>>>>>>>>>>>>>>>>> and > >>>>>>>>>>>>>>>>>>>>>>>>> existing > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> query > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> level config > >>>>>>>>>>>>>>>>>>>>>>>>> > >> `table.optimizer.source.predicate-pushdown-enabled` ? > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Best, > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Leonard > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2023年10月24日 下午4:18，Jiabao Sun < > >>>>>>>>>>>>>>>>> jiabao....@xtransfer.cn > >>>>>>>>>>>>>>>>>>>>>>>>> .INVALID> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 写道： > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Devs, > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I would like to start a discussion on > >>>>>>>>> FLIP-377: > >>>>>>>>>>>>>>>>> support > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> configuration > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> disable filter pushdown for Table/SQL > >>>>>>>>> Sources[1]. > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Currently, Flink Table/SQL does not > >> expose > >>>>>>>>>>>>>>>>> fine-grained > >>>>>>>>>>>>>>>>>>>>>>>>> control > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> for > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> users to enable or disable filter > >> pushdown. > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> However, filter pushdown has some > side > >>>>>>>>> effects, > >>>>>>>>>>>>>> such > >>>>>>>>>>>>>>>>> as > >>>>>>>>>>>>>>>>>>>>>>>>> additional > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> computational pressure on external > >> systems. > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Moreover, Improper queries can lead > to > >>>>>>> issues > >>>>>>>>>>>> such > >>>>>>>>>>>>>> as > >>>>>>>>>>>>>>>>>>> full > >>>>>>>>>>>>>>>>>>>>>>>>> table > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> scans, > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> which in turn can impact the stability > >> of > >>>>>>>>> external > >>>>>>>>>>>>>>>>>>> systems. > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Suppose we have an SQL query with two > >>>>>>> sources: > >>>>>>>>>>>>>> Kafka > >>>>>>>>>>>>>>>>>>> and a > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> database. > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> The database is sensitive to > pressure, > >> and > >>>>>>> we > >>>>>>>>>>>> want > >>>>>>>>>>>>>> to > >>>>>>>>>>>>>>>>>>>>>>>>> configure > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> it to > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> not perform filter pushdown to the > >> database > >>>>>>>>>>>> source. > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> However, we still want to perform > >> filter > >>>>>>>>> pushdown > >>>>>>>>>>>>>> to > >>>>>>>>>>>>>>>>> the > >>>>>>>>>>>>>>>>>>>>>>> Kafka > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> source > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> decrease network IO. > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I propose to support configuration to > >>>>>>> disable > >>>>>>>>>>>>>> filter > >>>>>>>>>>>>>>>>>>> push > >>>>>>>>>>>>>>>>>>>>>>>>> down for > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Table/SQL sources to let user decide > >>>>> whether > >>>>>>> to > >>>>>>>>>>>>>> perform > >>>>>>>>>>>>>>>>>>>>>>> filter > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> pushdown. > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Looking forward to your feedback. > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [1] > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>> > >>>>>>>>>>>> > >>>>>>>>> > >>>>>>> > >>>>> > >> > https://cwiki.apache.org/confluence/pages/viewpage.action?pageId=276105768 > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Best, > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Jiabao > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Best, > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Benchao Li > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>> -- > >>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>> Best, > >>>>>>>>>>>>>>>>>>>>>>>>>> Benchao Li > >>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>> > >>>>>>>>>>>>>> > >>>>>>>>>>>>>> > >>>>>>>>>>>>>> > >>>>>>>>>>>> > >>>>>>>>>>>> > >>>>>>>>>>>> > >>>>>>>>>> > >>>>>>>>> > >>>>>>>>> > >>>>>>> > >>>>>>> > >>>>> > >>>>> > >> > >> > >
