Enrique, If CI is completely redone and we have unified checks on every PR for every change covering all repos, yes… tools could use snapshot for consumption.
However there isn’t such a thing as snapshot for other technologies like npm packages. Anything that has any UI dependency has to be in the same repository, as internal consumption is possible… just not possible externally without a proper SEMVER release (snapshot is not SEMVER). On Fri, May 10, 2024 at 7:05 AM Enrique Gonzalez Martinez < [email protected]> wrote: > Hi Gabriele > > El vie, 10 may 2024, 12:57, Gabriele Cardosi <[email protected]> > escribió: > > > Hi Enrique, > > I'm ignoring anything else, but regarding > > > > "The other topic you are talking is the build. The question was > summarized > > by Francisco.if we build the repos in order, does kie tool able to build > > properly with the snapshots built in the pipeline or does need additional > > steps ?" > > > > I think the core of the problem is the following: > > when we backender made a modification (e.g. in drools repo) we are > somehow > > responsible to fix eventual break downstream (e.g. kogito-runtimes, > > kogito-examples, etc), but we completely ignores the tooling, and we > won't > > probably be able to fix it. So, the tooling guys must rely on some > "stable" > > version, otherwise we could break their work on a daily basis. > > This is more or less the situation I found when I joined: the drools > built > > was separated from the drools-wb one, sometimes modification on drools > repo > > broke drools-wb, and then they decided to pipeline the twos, to have > > immediate recognition, and fix, of that (at that time, our drools-wb job > > was to build drools every morning and then start working on drools-wb: if > > something get broken in drools-wb, then we pinged drool devs to > understand > > reason and eventually make fix). > > The solutions I see for our situation are: > > > > 1. keep tooling depend on some stable release, preserving independence > > from backender changes > > 2. enforce/improve cooperation between backender and tooling guys, so > > that as soon as some breaking change is made by the former, the latter > > can > > immediately fix > > > > > This is not a special scenario for anyone. This happens as well for others > repo. If you break and pr does not pass u redo your PR. > I don't see anything special there. So if the only thing for tooling to set > a specific version of a snapshot it means we have a problem into our unit > testing. It is impossible for backenders to fix something we are not aware > it is broken because the pr checks are not in there. At some point you need > you rely on CI. We all have to live with that problem. But at least we > should have the pr checks in place. That should mitigate the problem about > breaking stuff in other places. > > > Still this not answers my question regarding the building. It just explains > why the build might break something in tooling because our pr cheks are not > in place. > > > > > Side notes: > > > > 1. About point 1, I do not think it breaks the "single product" rule, > > because at release time everything should be aligned > > 2. About point 2, I'm not sure it is so easy to do > > 3. IMO this is completely transparent regarding where the code lives, > > and "single CI" means a single build system that properly manages the > > code > > to build > > > > Sorry if all the above was already clear and obvious to everyone 😀 > > > > Best > > > > Gabriele > > > > > > > > > > > > Il giorno ven 10 mag 2024 alle ore 12:08 Enrique Gonzalez Martinez < > > [email protected]> ha scritto: > > > > > Hi Alex > > > > > > You are mixing stuff here Alex. > > > > > > PR checks are there for guarding that nothing breaks when somebody is > > > pushing code. If kie tools can break because is not there it means we > > have > > > a problem in there. Keep in mind i am not talking about the cause why > > they > > > are missing checks in our PR, it could be resources it could be > something > > > else. > > > > > > The other topic you are talking is the build. The question was > summarized > > > by Francisco.if we build the repos in order, does kie tool able to > build > > > properly with the snapshots built in the pipeline or does need > additional > > > steps ? > > > > > > > > > Publishing artifacts is a whole different topic from the build. > Regarding > > > sync multiple deployments from the multirepo build i guess it could be > a > > > problem, but also that is not the question here. > > > > > > > > > > > > El vie, 10 may 2024, 11:55, Alex Porcelli <[email protected]> escribió: > > > > > > > Tiago already provided a in-depth explanation of the issue in this > ML, > > > > that is summarized in the circular dependency thread [1] > > > > > > > > > > > > TL;DR: **Today** KIE-Tools is not part of any PR checks in the > runtime > > > > repositories (drools, optaplanner, runtimes and apps) - so a change > in > > > > those repos can break KIE Tools. If we were to continue to use > > > > SNAPSHOTs, we need unify to a single CI that would include all > > > > repositories - including KIE Tools. > > > > > > > > [1] - > https://lists.apache.org/thread/58xm7pqdyztf7qztmhvntf8wdmvfx7jx > > > > > > > > On Fri, May 10, 2024 at 5:15 AM Francisco Javier Tirado Sarti > > > > <[email protected]> wrote: > > > > > > > > > > Hi Tiago, > > > > > I would argue that, being all the repos part of the same release, > > > mutable > > > > > snapshot is perfectly acceptable. As it currently happens between > > > > Runtimes > > > > > repo and Drools repo (which have the Kie api) and Apps repo and > > > Runtimes > > > > > repo. I, as I believe Enrique (at least if what I understood from > his > > > > > e-mail) , do not understand why tooling should be different in that > > > > regard. > > > > > > > > > > On Fri, May 10, 2024 at 1:26 AM Tiago Bento <[email protected] > > > > > > wrote: > > > > > > > > > > > Zanini and Enrique, > > > > > > > > > > > > Not sure if I'm making it sound differently, but everything I'm > > > saying > > > > > > is also aiming towards a healthy CI. Not only for SonataFlow or > > > Tools, > > > > > > though. For all of Apache KIE. > > > > > > > > > > > > My main point is that mutable Maven SNAPSHOTs are harming us, > > giving > > > a > > > > > > false impression of synchronization between the repos. It's an > > "easy > > > > > > way out" we've been historically abusing, IMHO. > > > > > > > > > > > > One of the best advantages of having multiple repos is that they > > can > > > > > > be individually developed, tested, and managed. However, by using > > > > > > Maven SNAPSHOTs as the synchronization mechanism, we can't > > guarantee > > > > > > that, since repos become broken on any given day. More than that, > > > it's > > > > > > impossible to go "back in time" on our development branches, > since > > > the > > > > > > SNAPSHOT version will always point to latest. > > > > > > > > > > > > Please read this section from the guidelines of the SciJava > project > > > at > > > > > > https://github.com/scijava/pom-scijava-base/blob/main/README.md. > > > > > > > > > > > > "Reproducible builds. This rule means no SNAPSHOT dependencies, > no > > > > > > SNAPSHOT parents, and no SNAPSHOT plugin versions. A snapshot > > version > > > > > > is not immutable, which means that code which depends on a > snapshot > > > > > > may build today, but not build tomorrow, if the snapshot is later > > > > > > changed. The best way to avoid this conundrum is to never depend > on > > > > > > SNAPSHOT versions. Snapshot are best used for testing only; they > > can > > > > > > be used transiently, but their use should never make it onto the > > main > > > > > > integration branch (e.g., main or master) of a project. See also > > > Using > > > > > > snapshot couplings during development at > > > > > > > > > > > > > > > > > > > > > > https://imagej.net/develop/architecture#using-snapshot-couplings-during-development > > > > > > ." > > > > > > > > > > > > This summarizes very well the problem I'm trying to convey here. > Of > > > > > > course, their words are much more clear than all the > explanations I > > > > > > tried giving so far. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, May 9, 2024 at 9:43 AM ricardo zanini fernandes > > > > > > <[email protected]> wrote: > > > > > > > > > > > > > > Tiago, > > > > > > > > > > > > > > Again, this is a major problem in our current structure that we > > > > should > > > > > > use > > > > > > > another thread to discuss. For my proposal is to at least have > a > > > > health > > > > > > > cloud build platform. We can completely remove UI from our > images > > > in > > > > the > > > > > > > SonataFlow space and keep the consoles in kie-tools. Once we > > solve > > > > the > > > > > > deep > > > > > > > structural problem we have, we can evaluate it better. What we > > > can't > > > > do > > > > > > is > > > > > > > be behind and not release. > > > > > > > > > > > > > > The template image is pretty useful if you really want to test > > the > > > > DevUI > > > > > > in > > > > > > > the image. You can easily pull the container file and build the > > > image > > > > > > > during your integration tests and run the tests you need. We > can > > do > > > > the > > > > > > > same in the image. I don't see a waste of resources, but as a > > > > temporary > > > > > > > alternative until we figure out the deeper problem. > > > > > > > > > > > > > > At the moment, everything "tools" related is in a single repo > and > > > the > > > > > > other > > > > > > > components are scattered in many other repos. We have to decide > > if > > > we > > > > > > want > > > > > > > mono repos (infra-oriented) or context repos > (feature-oriented). > > We > > > > can't > > > > > > > have both otherwise the mono repos will start to drag others to > > it, > > > > as we > > > > > > > are seeing happening. > > > > > > > > > > > > > > So IMO, we need first to sit down together and have a new repo > > > > structure > > > > > > > design, perhaps based on components. We need to evaluate. > > > > > > > > > > > > > > For the time being, we need to move forward at least and I can > > live > > > > with > > > > > > > integration tests at the end of the line using final > > versions/built > > > > > > > versions of the DevUI if needed for SonataFlow. > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, May 9, 2024 at 10:32 AM ricardo zanini fernandes < > > > > > > > [email protected]> wrote: > > > > > > > > > > > > > > > Hi Enrique! > > > > > > > > > > > > > > > > The images are using SNAPSHOTS from apps/runtimes currently. > > > There > > > > was > > > > > > a > > > > > > > > decision in the past to build apps in the images from the > > > > > > main/versioned > > > > > > > > branch. We are changing this to use SNAPSHOT/versioned > > artifacts > > > > > > published > > > > > > > > in Maven. About kie-tools, I don't know either. > > > > > > > > > > > > > > > > We can use immutable snapshots (weekly, nightlies) instead. > I'm > > > not > > > > > > > > against it. But we do need those for integration tests or at > > > least > > > > a > > > > > > robust > > > > > > > > CI platform to do integration without snapshots. > > > > > > > > > > > > > > > > Cheers! > > > > > > > > > > > > > > > > On Thu, May 9, 2024 at 5:07 AM Enrique Gonzalez Martinez < > > > > > > > > [email protected]> wrote: > > > > > > > > > > > > > > > >> Hi Tiago, > > > > > > > >> > > > > > > > >> I think the discussion is related to the graph dependency > for > > > > now. So > > > > > > > >> I would keep that in mind. Anyway I am kinda surprised about > > > some > > > > > > > >> concepts like (mutable snapshots and using snapshot > published > > > > > > > >> timestamps like they are final). > > > > > > > >> > > > > > > > >> Now I think I understand where the problem lies now; so > > > basically > > > > if > > > > > > > >> we had the proper graph dependency project built based on > > proper > > > > > > > >> snapshots everything would build just ok. So my question is > > > pretty > > > > > > > >> simple, why is it not possible for kie tools or kogito > images > > to > > > > use > > > > > > > >> the maven snapshot concept and point out to the last > snapshot > > > > build > > > > > > > >> (either local or remote) like other maven projects work. Is > > > there > > > > any > > > > > > > >> limitation there ? > > > > > > > >> > > > > > > > >> El mié, 8 may 2024 a las 22:30, Tiago Bento (< > > > > [email protected]>) > > > > > > > >> escribió: > > > > > > > >> > > > > > > > > >> > Hi Zanini! Welcome back, hope you had a great time during > > your > > > > PTO. > > > > > > > >> > > > > > > > > >> > If I understand correctly, the way you see the integration > > > > between > > > > > > > >> > repos relies heavily on timestamped SNAPSHOTs. This way: > > > > > > > >> > 1. `kogito-images` would stop building `kogito-apps`, and > > > would > > > > rely > > > > > > > >> > on timestamped SNAPSHOTs being published from > > > > > > > >> > `drools/optaplanner/kogito-runtimes/kogito-apps`. > > > > > > > >> > 2. `kie-tools` would start publishing timestamped > SNAPSHOTs > > > for > > > > its > > > > > > UI > > > > > > > >> > components, so they would be consumed downstream by > > > > > > > >> > `kogito-serverless-operator`. > > > > > > > >> > > > > > > > > >> > If that's what you mean, let me elaborate on some of the > > > > > > consequences > > > > > > > >> > of this integration model, where we stop using the mutable > > > > > > > >> > 999-SNAPSHOT and start relying more on timestamped > SNAPSHOTs > > > for > > > > > > > >> > cross-repo synchronization: > > > > > > > >> > a. Cross-repo PRs would not be possible anymore, depending > > on > > > > which > > > > > > > >> > repos are involved in the ensemble. This would create > > > boundaries > > > > > > > >> > between certain groups of our repos, namely: > > > > > > > >> > drools/optaplanner/kogito-runtimes/kogito-apps --> > > > > kogito-images --> > > > > > > > >> > kie-tools, --> kogito-serverless-operator. So 4 > "independent > > > > > > > >> > clusters". > > > > > > > >> > b. kogito-images, kie-tools, and > kogito-serverless-operator, > > > > using > > > > > > > >> > timestamped SNAPSHOTs between themselves, would make the > > most > > > > > > upstream > > > > > > > >> > of the three (in this case, `kogito-images`), to be the > one > > > > defining > > > > > > > >> > what timestamped SNAPSHOT version we should use for its > > > upstream > > > > > > > >> > dependencies > > (drools/optaplanner/kogito-runtimes/kogito-apps). > > > > In > > > > > > more > > > > > > > >> > details: If `kogito-images` depends on > > > > > > > >> > `drools/optaplanner/kogito-runtimes/kogito-apps` using > > version > > > > > > > >> > 999-20240501, that's the version `kie-tools` and > > > > > > > >> > `kogito-serverless-operator` need to use as well, as the > > > > > > > >> > drools/optaplanner/kogito-runtimes/kogito-apps would come > > > > > > transitively > > > > > > > >> > from the `kogito-images` dependency these two repos would > > > have. > > > > > > This, > > > > > > > >> > IMHO, causes a lot of confusion, since the dates on the > > > > timestamped > > > > > > > >> > SNAPSHOT versions have implicit transitive dependencies to > > > other > > > > > > > >> > upstream projects that also have their own timestamped > > > SNAPSHOTs > > > > > > > >> > published. I.e., 999-20240501 of `kie-tools` won't be > > aligned > > > > with > > > > > > > >> > 999-2024051 of > > > `drools/optaplanner/kogito-runtimes/kogito-apps`. > > > > > > > >> > c. Updating dependencies across the board would be much > more > > > > > > > >> > difficult, as we would need to rely on a chain reaction > > > starting > > > > > > from > > > > > > > >> > the `drools/optaplanner/kogito-runtimes/kogito-apps` > cluster > > > > all the > > > > > > > >> > way down to `kogito-serverless-operator`, releasing > > > timestamped > > > > > > > >> > SNAPSHOTs and sending PRs for each "cluster" along the > way. > > > > > > > >> > > > > > > > > >> > I'm not sure this is the way we want to move forward, to > be > > > > honest, > > > > > > as > > > > > > > >> > these consequences need to be thoroughly examined by > people > > in > > > > the > > > > > > > >> > community, so that all the side-effects of this choice are > > > > clear to > > > > > > > >> > everyone. > > > > > > > >> > > > > > > > > >> > To conclude, having `kie-tools` building a "template > image" > > to > > > > > > verify > > > > > > > >> > that it will not break `kogito-serverless-operator` > > > downstream, > > > > and > > > > > > > >> > having `kogito-serverless-operator` building parts of > > > > `kie-tools` to > > > > > > > >> > incorporate the latest changes, IMHO, is: > > > > > > > >> > 1. Duplication of building logic. IMHO, we can't have > > > individual > > > > > > repos > > > > > > > >> > creating its own up- and downstream CI systems. > > > > > > > >> > 2. Conflicting with the timestamped SNAPSHOTs strategy for > > > > > > integrating > > > > > > > >> > repos, where boundaries are clearly defined. > > > > > > > >> > 3. Wasteful use of resources (same that is happening with > > > > > > > >> > `kogito-images` building `kogito-apps` right now). > > > > > > > >> > > > > > > > > >> > I'm sorry for bringing all this to this seemingly simple > > > > proposal, > > > > > > but > > > > > > > >> > I'm afraid taking steps without knowing where we're going > > > isn't > > > > the > > > > > > > >> > way to move forward. > > > > > > > >> > > > > > > > > >> > Please let me know if I misunderstood something. > > > > > > > >> > > > > > > > > >> > On Wed, May 8, 2024 at 3:15 PM ricardo zanini fernandes > > > > > > > >> > <[email protected]> wrote: > > > > > > > >> > > > > > > > > > >> > > Hi! > > > > > > > >> > > > > > > > > > >> > > Sorry for the late reply, I was on PTO. > > > > > > > >> > > > > > > > > > >> > > Replies inline. > > > > > > > >> > > > > > > > > > >> > > > The `kie-tools` CI is not prepared to build > > > > > > > >> > > `kogito-serverless-operator`, so the way > > > > > > `kogito-serverless-operator` > > > > > > > >> > > references the SonataFlow Quarkus Dev UI will be > important > > > to > > > > > > > >> > > establish the boundaries between both repos. To further > > > > develop > > > > > > the > > > > > > > >> > > SonataFlow Quarkus Dev UI and have its changes reflect > on > > > the > > > > > > > >> > > `kogito-swf-devmode` image, we need to come up with a > > > strategy > > > > > > that is > > > > > > > >> > > both safe, consistent, and enforces correctness. There's > > > also > > > > the > > > > > > fact > > > > > > > >> > > that currently `kie-tools` depends on timestamped > > SNAPSHOTs > > > of > > > > > > > >> > > Kogito/Drools, while `kogito-serverless-operator` uses > > > > > > 999-SNAPSHOT, > > > > > > > >> > > if I'm not mistaken. Can you elaborate a little bit more > > on > > > > how > > > > > > you > > > > > > > >> > > see this reference being done? Please consider > cross-repo > > > PRs > > > > for > > > > > > big > > > > > > > >> > > migrations like the Quarkus 3.8.4 that is currently > > > happening. > > > > > > > >> > > > > > > > > > >> > > This will make us discuss yet again the need of > snapshots > > > for > > > > the > > > > > > UI > > > > > > > >> > > components used by the images. The images must be the > end > > of > > > > the > > > > > > build > > > > > > > >> > > pipeline, where we aggregate every component we ship in > a > > > > single > > > > > > > >> instance > > > > > > > >> > > to release. Yet, they are a core part of the cloud > > platform, > > > > hence > > > > > > > >> part of > > > > > > > >> > > the Operator BDD, testing, integration, and delivering. > > > > > > Intermediate > > > > > > > >> repos > > > > > > > >> > > can't depend on them unless they are also responsible > for > > > > > > maintenance > > > > > > > >> and > > > > > > > >> > > release like what we're doing with the consoles. > > > > > > > >> > > > > > > > > > >> > > Also, the images can have a respin anytime we need a new > > > > component > > > > > > > >> bump. We > > > > > > > >> > > do this all the time to fix CVEs or bug fixes in a > > specific > > > > > > component > > > > > > > >> that > > > > > > > >> > > is part of the image. > > > > > > > >> > > > > > > > > > >> > > The devui can be developed and maintained within the > > > kie-tools > > > > > > repo > > > > > > > >> and > > > > > > > >> > > have tests that verify that component. The integration > > will > > > be > > > > > > made > > > > > > > >> on the > > > > > > > >> > > Images/Operator side once we grab a latest snapshot. > > > > > > Alternatively, > > > > > > > >> we can > > > > > > > >> > > do: > > > > > > > >> > > 1. The tools CI can fetch a template image, inject the > > > > component, > > > > > > and > > > > > > > >> run > > > > > > > >> > > the required tests > > > > > > > >> > > 2. The image/operator CI can fetch and build the UI > > > > components and > > > > > > > >> run the > > > > > > > >> > > integration tests > > > > > > > >> > > > > > > > > > >> > > > Also, regarding point "4. Review the PR GHA checks to > > run > > > > CLI > > > > > > tests > > > > > > > >> > > once there's a change in the cmd module" of the proposed > > > > EPIC, I > > > > > > think > > > > > > > >> > > we might run into problems, since the `cmd` module also > > > > depends > > > > > > on the > > > > > > > >> > > `api` and `workflowproj` modules of > > > > `kogito-serverless-operator.` > > > > > > I'm > > > > > > > >> > > afraid changes made to these two modules would also need > > to > > > > > > trigger a > > > > > > > >> > > build of the `cmd` module, and they can potentially > break > > > it. > > > > > > > >> > > > > > > > > > >> > > Sorry to not get into details there, but the new cmd > > module > > > > will > > > > > > be > > > > > > > >> part of > > > > > > > >> > > the Operator's workspace, any changes in any cross > > > > dependencies > > > > > > there > > > > > > > >> will > > > > > > > >> > > trigger the CI checks, as we are doing today in the > > builder > > > > and > > > > > > > >> > > workflowproj modules. It will be way easier to maintain > > the > > > > CLI. > > > > > > > >> > > > > > > > > > >> > > > These considerations alone, IMHO, expose one of the > > > biggest > > > > > > > >> challenges > > > > > > > >> > > we have in our community right now, which is that the > > > > definition > > > > > > and > > > > > > > >> > > implementation of the dependency graph between > > > > > > repos/modules/packages > > > > > > > >> > > is currently spread across many different "build > systems", > > > > like > > > > > > the > > > > > > > >> > > new proposed GHA jobs exclusive to the > > > > > > `kogito-serverless-operator` > > > > > > > >> > > repo, the Build Chain system we have for the > Drools/Kogito > > > > repos, > > > > > > the > > > > > > > >> > > `kie-tools` CI, and the many Jenkins jobs we have on > > > Apache's > > > > > > Jenkins. > > > > > > > >> > > There's also the fact that we have `kogito-images` > > > selectively > > > > > > > >> > > building parts of `kogito-apps` during its own build to > > > > include > > > > > > them > > > > > > > >> > > in the images it produces. > > > > > > > >> > > > > > > > > > >> > > I agree. We would need to sit together and solve this > as a > > > > team, > > > > > > > >> having a > > > > > > > >> > > nice integration across every repo. The kogito-images > > > building > > > > > > parts > > > > > > > >> of the > > > > > > > >> > > apps is something we currently working on, IIRC. The > apps > > > will > > > > > > deploy > > > > > > > >> a > > > > > > > >> > > snapshot as part of the nightlies and the images will be > > > > using it. > > > > > > > >> > > > > > > > > > >> > > > I just think it is important to highlight that this > > > proposal > > > > > > would > > > > > > > >> > > only address a LOCAL problem related exclusively to the > > > > SonataFlow > > > > > > > >> > > section of the Apache KIE community, while, at the same > > > time, > > > > not > > > > > > > >> > > contributing to reducing the segmentation of the Apache > > KIE > > > > > > community > > > > > > > >> > > as a whole. > > > > > > > >> > > > > > > > > > >> > > Yes, the proposal is to starting addressing the local > > Apache > > > > KIE > > > > > > > >> SonataFlow > > > > > > > >> > > Cloud platform first. But I agree that we need to > refactor > > > > our CI > > > > > > as a > > > > > > > >> > > whole, which is something we should start in a new > thread. > > > > > > > >> > > > > > > > > > >> > > Cheers! > > > > > > > >> > > > > > > > > > >> > > On Mon, Apr 22, 2024 at 10:02 PM Tiago Bento < > > > > > > [email protected]> > > > > > > > >> wrote: > > > > > > > >> > > > > > > > > > >> > > > Zanini and Alex, > > > > > > > >> > > > > > > > > > > >> > > > The task we agreed on for after releasing Apache KIE > 10 > > is > > > > > > > >> > > > > > > https://github.com/apache/incubator-kie-issues/issues/1040. > > > > It > > > > > > only > > > > > > > >> > > > describes deleting the temporary copies we'll have on > > KIE > > > > Tools > > > > > > and > > > > > > > >> > > > reverting things back to where they were, using the > > fixed > > > > 10.0.0 > > > > > > > >> > > > version. > > > > > > > >> > > > > > > > > > > >> > > > Moving `kn-plugin-workflow` and the > > > > > > `kogito-swf-{devmode,builder}` > > > > > > > >> > > > images to `kogito-serverless-operator` would be a new > > > move, > > > > > > which I > > > > > > > >> > > > understand is the scope of this proposal thread. > > > > > > > >> > > > > > > > > > > >> > > > Doing so, however, will make > > `kogito-serverless-operator` > > > > > > depend on > > > > > > > >> > > > `kie-tools`, since the SonataFlow Quarkus Dev UI is > > hosted > > > > there > > > > > > > >> now, > > > > > > > >> > > > and it is a dependency of the `kogito-swf-devmode` > > image. > > > > > > > >> > > > > > > > > > > >> > > > I'm saying this because I think we need to further > > discuss > > > > the > > > > > > > >> > > > consequences of this change... > > > > > > > >> > > > > > > > > > > >> > > > The `kie-tools` CI is not prepared to build > > > > > > > >> > > > `kogito-serverless-operator`, so the way > > > > > > > >> `kogito-serverless-operator` > > > > > > > >> > > > references the SonataFlow Quarkus Dev UI will be > > important > > > > to > > > > > > > >> > > > establish the boundaries between both repos. To > further > > > > develop > > > > > > the > > > > > > > >> > > > SonataFlow Quarkus Dev UI and have its changes reflect > > on > > > > the > > > > > > > >> > > > `kogito-swf-devmode` image, we need to come up with a > > > > strategy > > > > > > that > > > > > > > >> is > > > > > > > >> > > > both safe, consistent, and enforces correctness. > There's > > > > also > > > > > > the > > > > > > > >> fact > > > > > > > >> > > > that currently `kie-tools` depends on timestamped > > > SNAPSHOTs > > > > of > > > > > > > >> > > > Kogito/Drools, while `kogito-serverless-operator` uses > > > > > > 999-SNAPSHOT, > > > > > > > >> > > > if I'm not mistaken. Can you elaborate a little bit > more > > > on > > > > how > > > > > > you > > > > > > > >> > > > see this reference being done? Please consider > > cross-repo > > > > PRs > > > > > > for > > > > > > > >> big > > > > > > > >> > > > migrations like the Quarkus 3.8.4 that is currently > > > > happening. > > > > > > > >> > > > > > > > > > > >> > > > Also, regarding point "4. Review the PR GHA checks to > > run > > > > CLI > > > > > > tests > > > > > > > >> > > > once there's a change in the cmd module" of the > proposed > > > > EPIC, I > > > > > > > >> think > > > > > > > >> > > > we might run into problems, since the `cmd` module > also > > > > depends > > > > > > on > > > > > > > >> the > > > > > > > >> > > > `api` and `workflowproj` modules of > > > > > > `kogito-serverless-operator.` > > > > > > > >> I'm > > > > > > > >> > > > afraid changes made to these two modules would also > need > > > to > > > > > > trigger > > > > > > > >> a > > > > > > > >> > > > build of the `cmd` module, and they can potentially > > break > > > > it. > > > > > > > >> > > > > > > > > > > >> > > > These considerations alone, IMHO, expose one of the > > > biggest > > > > > > > >> challenges > > > > > > > >> > > > we have in our community right now, which is that the > > > > > > definition and > > > > > > > >> > > > implementation of the dependency graph between > > > > > > > >> repos/modules/packages > > > > > > > >> > > > is currently spread across many different "build > > systems", > > > > like > > > > > > the > > > > > > > >> > > > new proposed GHA jobs exclusive to the > > > > > > `kogito-serverless-operator` > > > > > > > >> > > > repo, the Build Chain system we have for the > > Drools/Kogito > > > > > > repos, > > > > > > > >> the > > > > > > > >> > > > `kie-tools` CI, and the many Jenkins jobs we have on > > > > Apache's > > > > > > > >> Jenkins. > > > > > > > >> > > > There's also the fact that we have `kogito-images` > > > > selectively > > > > > > > >> > > > building parts of `kogito-apps` during its own build > to > > > > include > > > > > > them > > > > > > > >> > > > in the images it produces. > > > > > > > >> > > > > > > > > > > >> > > > With all that said, I'm not opposed to moving the > > > > > > > >> `kn-workflow-plugin` > > > > > > > >> > > > package from `kie-tools` to the `cmd` module of > > > > > > > >> > > > `kogito-serverless-operator`. In fact, like I said in > > the > > > > past, > > > > > > I > > > > > > > >> > > > think it makes a lot of sense that they're part of the > > > same > > > > > > > >> > > > compilation unit, as they're very closely related, and > > > > should > > > > > > > >> > > > therefore be in sync at all times. > > > > > > > >> > > > > > > > > > > >> > > > I just think it is important to highlight that this > > > proposal > > > > > > would > > > > > > > >> > > > only address a LOCAL problem related exclusively to > the > > > > > > SonataFlow > > > > > > > >> > > > section of the Apache KIE community, while, at the > same > > > > time, > > > > > > not > > > > > > > >> > > > contributing to reducing the segmentation of the > Apache > > > KIE > > > > > > > >> community > > > > > > > >> > > > as a whole. > > > > > > > >> > > > > > > > > > > >> > > > Regards, > > > > > > > >> > > > > > > > > > > >> > > > Tiago Bento > > > > > > > >> > > > > > > > > > > >> > > > On Fri, Apr 19, 2024 at 4:08 PM ricardo zanini > fernandes > > > > > > > >> > > > <[email protected]> wrote: > > > > > > > >> > > > > > > > > > > > >> > > > > Alex, > > > > > > > >> > > > > > > > > > > > >> > > > > Yes, in the proposal we just barely outlined. I > create > > > the > > > > > > EPIC > > > > > > > >> to have > > > > > > > >> > > > > more details and start working on them as soon as we > > > > agree. > > > > > > > >> > > > > > > > > > > > >> > > > > On Fri, Apr 19, 2024 at 4:24 PM Alex Porcelli < > > > > > > [email protected]> > > > > > > > >> wrote: > > > > > > > >> > > > > > > > > > > > >> > > > > > Thank you for outlining the tasks post the 10.x > > > release. > > > > > > It's > > > > > > > >> > > > > > important to note that these are already included > in > > > the > > > > > > amended > > > > > > > >> > > > > > proposal [1], specifically in steps 9 and 10, > which > > > the > > > > > > > >> community has > > > > > > > >> > > > > > voted on. If there are concerns about the > execution > > of > > > > these > > > > > > > >> steps, > > > > > > > >> > > > > > I'd like to reassure you that they will proceed as > > > > planned, > > > > > > in > > > > > > > >> > > > > > compliance with Apache guidelines. > > > > > > > >> > > > > > > > > > > > > >> > > > > > Looking ahead, after the release of version 10, we > > > > already > > > > > > > >> agreed that > > > > > > > >> > > > > > we'll need to have a thorough discussion regarding > > the > > > > > > codebase > > > > > > > >> > > > > > structure. This will allow us to refine our > > > > understanding > > > > > > of the > > > > > > > >> > > > > > sub-brands, their interrelationships, and their > > > > strategic > > > > > > > >> positioning. > > > > > > > >> > > > > > I agree that this is crucial for our next steps > and > > > look > > > > > > > >> forward to > > > > > > > >> > > > > > our collaborative efforts in shaping this. > > > > > > > >> > > > > > > > > > > > > >> > > > > > [1] - > > > > > > > >> > > > https://lists.apache.org/thread/pw327lkpmy9gxklq4t5zbwzxjo2y3c0w > > > > > > > >> > > > > > > > > > > > > >> > > > > > On Fri, Apr 19, 2024 at 2:50 PM ricardo zanini > > > fernandes > > > > > > > >> > > > > > <[email protected]> wrote: > > > > > > > >> > > > > > > > > > > > > > >> > > > > > > Folks, > > > > > > > >> > > > > > > > > > > > > > >> > > > > > > I've outlined the tasks we need once we release > > 10.x > > > > from > > > > > > > >> kie-tools: > > > > > > > >> > > > > > > > > > > > > https://github.com/apache/incubator-kie-issues/issues/1102 > > > > > > > >> > > > > > > > > > > > > > >> > > > > > > Once we release, we can detail this planning and > > > start > > > > > > > >> working on it > > > > > > > >> > > > to > > > > > > > >> > > > > > > have a streamlined process for the next release. > > > > > > > >> > > > > > > > > > > > > > >> > > > > > > Please let me know if it makes sense to you. We > > can > > > > break > > > > > > > >> down and > > > > > > > >> > > > detail > > > > > > > >> > > > > > > the tasks once we agree on this initial plan. > > > > > > > >> > > > > > > > > > > > > > >> > > > > > > Cheers! > > > > > > > >> > > > > > > -- > > > > > > > >> > > > > > > Ricardo Zanini Fernandes > > > > > > > >> > > > > > > Vida longa e próspera. > > > > > > > >> > > > > > > > > > > > > >> > > > > > > > > > > > > >> > > > > --------------------------------------------------------------------- > > > > > > > >> > > > > > To unsubscribe, e-mail: > > > [email protected] > > > > > > > >> > > > > > For additional commands, e-mail: > > > > [email protected] > > > > > > > >> > > > > > > > > > > > > >> > > > > > > > > > > > > >> > > > > > > > > > > >> > > > > > > > > > > >> > > > > --------------------------------------------------------------------- > > > > > > > >> > > > To unsubscribe, e-mail: > [email protected] > > > > > > > >> > > > For additional commands, e-mail: > > [email protected] > > > > > > > >> > > > > > > > > > > >> > > > > > > > > > > >> > > > > > > > > >> > > > > > > > > > --------------------------------------------------------------------- > > > > > > > >> > To unsubscribe, e-mail: [email protected] > > > > > > > >> > For additional commands, e-mail: [email protected] > > > > > > > >> > > > > > > > > >> > > > > > > > >> > > > > --------------------------------------------------------------------- > > > > > > > >> To unsubscribe, e-mail: [email protected] > > > > > > > >> For additional commands, e-mail: [email protected] > > > > > > > >> > > > > > > > >> > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > > To unsubscribe, e-mail: [email protected] > > > > > > For additional commands, e-mail: [email protected] > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > To unsubscribe, e-mail: [email protected] > > > > For additional commands, e-mail: [email protected] > > > > > > > > > > > > > >
