Hi Stephane,
Thanks, I will give a try on that.
As there are no repository for 2.2, base on your experience in Mac, do we need
to recompile the whole lib, or we could just use the binary/libs from the jogl
web? If so, how should we place the libs and jar in the system? The previous
Mac compilation the dylib were place in the thirdparty folder, but now as I am
not using any thirparty from the scilab github, how should I get the scilab to
refer to the locations?
Thanks again for advice.
Regards,
Chin Luh
---- On Thu, 07 May 2020 20:44:33 +0800 Stéphane Mottelet
<stephane.motte...@utc.fr> wrote ----
Hi,
Le 07/05/2020 à 14:29, Chin Luh Tan a
écrit :
Hi Stephane,
I applied the patch Change
https://antispam.utc.fr/proxy/2/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/codereview.scilab.org/17530
but not
the Change
https://antispam.utc.fr/proxy/2/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/codereview.scilab.org/21438,
as the
original configure.ac still searching for Jogl 2.2.
I tried the path set 5 and 8 from changes 17530, both
compile the scilab with minor modification on the fop (to
enable detection).
As I am trying to compile in Arm environment, I have to
install the 3rd parties from apt-get, and with those libs
installed, "configure" was able to "pass" for the make.
i think the issue is on the jogl now? The parts which
differentiate 2.2. and 2.3 were mentioned in the configure.ac:
AC_JAVA_CHECK_JAR([jogl2],[javax.media.opengl.glu.GLUnurbs],[Scilab
3D rendering - Version 2.0], [], [], [2.2])
AC_JAVA_CHECK_JAR([jogl2],[jogamp.opengl.x11.glx.GLX],[Scilab
3D rendering - Version 2.3], [], [], 2.3)
On the source point of view, 2.3 version changed all class
headers, but there are surely may other changes in the
implementation.
AC_JAVA_CHECK_JAR([gluegen2-rt],[jogamp.common.os.MachineDescriptionRuntime],[Scilab
3D rendering])
AC_JAVA_CHECK_JAR([gluegen2-rt],[com.jogamp.common.os.Platform],[Scilab
3D rendering])
Should I use the Jogl2.2 for the compilation and use the
original configure.ac?
I think so. Just to test that the problem still occurs (or not)
with 2.2.
S.
Thanks.
Regards,
Chin Luh
---- On Thu, 07 May 2020 01:42:51 +0800 Stéphane Mottelet
mailto:stephane.motte...@utc.fr wrote ----
If you apply the JoGL patch then third
parties have to be updated as well. I think you did it.
But since this patch is not needed for Linux, I would
try to compile with previous version.
S.
Le 6 mai 2020 à 18:52, Chin Luh Tan <mailto:chinluh....@bytecode-asia.com>
a écrit :
sorry pls ignore the previous incomplete email
which has been accidentally sent:
I tried to compile scilab 6.1 under raspberry
pi 4, and the compilation completed with scilab
lauched with following messages:
Caught handled GLException:
EGLGLXDrawableFactory - Could not initialize
shared resources for EGLGraphicsDevice[type
.egl, v1.4.0, connection :0.0, unitID 0,
handle 0xffffffffa8b148f0, owner true,
ResourceToolkitLock[obj 0xb29daf, isOwner
true, <1fa6506, f15db4>[count 1, qsz 0,
owner <main-SharedResourceRunner>]]] on
thread main-SharedResourceRunner
[0]:
jogamp.opengl.egl.EGLDrawableFactory$SharedResourceImplementation.createSharedResource(EGLDrawableFactory.java:518)
[1]:
jogamp.opengl.SharedResourceRunner.run(SharedResourceRunner.java:353)
[2]:
java.lang.Thread.run(Thread.java:748)
Caused[0] by NoSuchMethodError:
java.nio.IntBuffer.rewind()Ljava/nio/IntBuffer;
on thread main-SharedResourceRunner
[0]:
com.jogamp.common.nio.Buffers.newDirectIntBuffer(Buffers.java:146)
[1]:
com.jogamp.common.nio.Buffers.newDirectIntBuffer(Buffers.java:150)
[2]:
com.jogamp.common.nio.Buffers.newDirectIntBuffer(Buffers.java:154)
[3]:
jogamp.opengl.egl.EGLGraphicsConfiguration.EGLConfig2Capabilities(EGLGraphicsConfiguration.java:221)
[4]:
jogamp.opengl.egl.EGLGraphicsConfigurationFactory.eglConfigs2GLCaps(EGLGraphicsConfigurationFactory.java:481)
[5]:
jogamp.opengl.egl.EGLDrawableFactory.getAvailableEGLConfigs(EGLDrawableFactory.java:962)
[6]:
jogamp.opengl.egl.EGLDrawableFactory.access$800(EGLDrawableFactory.java:88)
[7]:
jogamp.opengl.egl.EGLDrawableFactory$SharedResourceImplementation.mapAvailableEGLESConfig(EGLDrawableFactory.java:679)
[8]:
jogamp.opengl.egl.EGLDrawableFactory$SharedResourceImplementation.createEGLSharedResourceImpl(EGLDrawableFactory.java:613)
[9]:
jogamp.opengl.egl.EGLDrawableFactory$SharedResourceImplementation.createSharedResource(EGLDrawableFactory.java:516)
[10]:
jogamp.opengl.SharedResourceRunner.run(SharedResourceRunner.java:353)
[11]:
java.lang.Thread.run(Thread.java:748)
Caught handled GLException:
X11GLXDrawableFactory - Could not initialize
shared resources for X11GraphicsDevice[type
.x11, connection :0.0, unitID 0, handle 0x0,
owner false, ResourceToolkitLock[obj
0x1f4f0f8, isOwner false, <1c08638,
40f0>[count 0, qsz 0, owner <NULL>]]]
on thread main-SharedResourceRunner
[0]:
jogamp.opengl.x11.glx.X11GLXDrawableFactory$SharedResourceImplementation.createSharedResource(X11GLXDrawableFactory.java:306)
[1]:
jogamp.opengl.SharedResourceRunner.run(SharedResourceRunner.java:353)
[2]:
java.lang.Thread.run(Thread.java:748)
while I am still able to launch the Scilab and
perform most operation, however, when I tried to
plot a figure, i get:
java.lang.reflect.InvocationTargetException
at
java.awt.EventQueue.invokeAndWait(EventQueue.java:1349)
at
java.awt.EventQueue.invokeAndWait(EventQueue.java:1324)
at
javax.swing.SwingUtilities.invokeAndWait(SwingUtilities.java:1353)
at
org.scilab.modules.gui.SwingView.updateObject(Unknown
Source)
at
org.scilab.modules.graphic_objects.graphicController.GraphicController$2.run(Unknown
Source)
at
org.scilab.modules.graphic_objects.graphicController.GraphicController.objectUpdate(Unknown
Source)
at
org.scilab.modules.graphic_objects.graphicController.GraphicController.setGraphicObjectRelationship(Unknown
Source)
at
org.scilab.modules.graphic_objects.builder.Builder.cloneAxesModel(Unknown
Source)
at
org.scilab.modules.graphic_objects.builder.Builder.createNewFigureWithAxes(Unknown
Source)
Caused by: com.jogamp.opengl.GLException:
Profile GL_DEFAULT is not available on
X11GraphicsDevice[type .x11, connection :0.0,
unitID 0, handle 0x0, owner false,
ResourceToolkitLock[obj 0x1f4f0f8, isOwner
false, <1c08638, 40f0>[count 0, qsz 0,
owner <NULL>]]], but: []
at
com.jogamp.opengl.GLProfile.get(GLProfile.java:991)
at
com.jogamp.opengl.GLProfile.getDefault(GLProfile.java:722)
at
com.jogamp.opengl.awt.GLJPanel.<init>(GLJPanel.java:363)
at
com.jogamp.opengl.awt.GLJPanel.<init>(GLJPanel.java:337)
at
com.jogamp.opengl.awt.GLJPanel.<init>(GLJPanel.java:325)
at
org.scilab.modules.gui.bridge.canvas.SwingScilabCanvasImpl$SafeGLJPanel.<init>(Unknown
Source)
at
org.scilab.modules.gui.bridge.canvas.SwingScilabCanvasImpl$SafeGLJPanel.<init>(Unknown
Source)
at
org.scilab.modules.gui.bridge.canvas.SwingScilabCanvasImpl.createOpenGLComponent(Unknown
Source)
.
Any suggestion what I need to change for the
compilation?
I compile scilab with:
1. gcc, g++, gfortran v 8, and also another try
on v9
2. openjdk-8-jdk
3. Tried Raspbian, Ubuntu for Pi 18.04 , same
issue.
4. Applied jogl 2.3.2 patch.
Thanks.
Rgds,
CL
---- On Thu, 07 May 2020 00:45:23 +0800 Chin
Luh Tan <mailto:chinluh....@bytecode-asia.com> wrote
----
Hi,
I tried to compile scilab 6.1 under
raspberry pi 4, and the compilation
completed with scilab lauched with
following messages:
_______________________________________________
users mailing list
mailto:us...@lists.scilab.org
https://antispam.utc.fr/proxy/1/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/lists.scilab.org/mailman/listinfo/users
_______________________________________________
dev mailing list
mailto:dev@lists.scilab.org
https://antispam.utc.fr/proxy/2/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/antispam.utc.fr/proxy/1/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/lists.scilab.org/mailman/listinfo/dev
_______________________________________________
dev mailing list
mailto:dev@lists.scilab.org
http://lists.scilab.org/mailman/listinfo/dev
_______________________________________________
dev mailing list
mailto:dev@lists.scilab.org
https://antispam.utc.fr/proxy/1/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/lists.scilab.org/mailman/listinfo/dev
--
Stéphane Mottelet
Ingénieur de recherche
EA 4297 Transformations Intégrées de la Matière Renouvelable
Département Génie des Procédés Industriels
Sorbonne Universités - Université de Technologie de Compiègne
CS 60319, 60203 Compiègne cedex
Tel : +33(0)344234688
http://www.utc.fr/~mottelet
_______________________________________________
dev mailing list
dev@lists.scilab.org
http://lists.scilab.org/mailman/listinfo/dev_______________________________________________
dev mailing list
dev@lists.scilab.org
http://lists.scilab.org/mailman/listinfo/dev
