Hi Anoop,
I don't know this error, maybe it is related to the issue Xavier has ?
I'm sorry but I can't help you much on this right now. Xavier might be
able to help you but he is now on holidays. He will be back on Thursday
next week. Maybe you can look at the bitbake code to see what is the
issue and/or ask the Yocto guys.
Best regards,
Kevin
On 22/08/2014 14:39, Anoop Babu wrote:
Dear Kevin,
Thank you for your valuable inputs. I commented out statement related
egl and gallium egl, with that I could proceed to overcome the mesa
package error.
Finally was able to reach do_rootfs stage, where it broke down
stating mesa installation errors for which I had comment out
dependencies as you had mentioned.
I could over come that error but hit upon another series of error. I
have attached the log files for the same.
Hope clear this hurdle. Expecting you valuable inputs.
Please find the attached log files.
Best regards
Anoop
Best regards
A.B
PPlease think about the environment before printing this e-mail
/
*7*Switch off as you go |*q*Always recycle |*P*Save a tree...please
don't print this e-mail unless you really need to.
/
On Wed, Aug 20, 2014 at 6:18 PM, Kévin THIERRY
<[email protected]
<mailto:[email protected]>> wrote:
Hi Anoop,
If don't mind not having mesa maybe you can just remove it from
the image recipe. In
meta-tizen/recipes-image/tizen-core-image-minimal.bb
<http://tizen-core-image-minimal.bb> comment or remove those lines:
CORE_IMAGE_BASE_INSTALL += "mesa-megadriver"
CORE_IMAGE_BASE_INSTALL += "libegl-gallium"
CORE_IMAGE_BASE_INSTALL += "libegl-mesa"
CORE_IMAGE_BASE_INSTALL += "libgbm"
CORE_IMAGE_BASE_INSTALL += "libgbm-gallium"
CORE_IMAGE_BASE_INSTALL += "mesa-driver-pipe-nouveau"
CORE_IMAGE_BASE_INSTALL += "mesa-driver-pipe-swrast"
CORE_IMAGE_BASE_INSTALL += "mesa-driver-pipe-vmwgfx"
CORE_IMAGE_BASE_INSTALL += "mesa-driver-pipe-i915"
CORE_IMAGE_BASE_INSTALL += "libgles1-mesa"
CORE_IMAGE_BASE_INSTALL += "libgles2-mesa"
Regarding BlueZ 5 I think it is an upstream recipe and I've never
had this kind of error. Try to google it and if you find nothing
look at what bitbake is trying to do directly in the code. You can
also ask the Yocto guys on the relevant yocto mailing list or
directly on IRC. Also you may want to clean the bluez5 project and
try to build it again in case your environment has been corrupted
(bitbake bluez5 -c cleanall).
I hope this help,
Kevin
On 20/08/2014 14:10, Anoop Babu wrote:
Dear Kevin, Xavier,
I have commented out GALLIUMDRIVERS_append = ",i915" in
mesa_%.bbappend under meta-tizen/recipes-graphics/mesa/.
Unfortunately I haven't overcome the do configure error for
mesa - ERROR: oe_runconf failed.
I also hit upon another error.
ERROR: Recipe bluez5 is trying to change PR from 'r1' to
'r11'. This will cause do_package_write_* failures since the
incorrect data will be used and they will be unable to find
the right workdir.
ERROR: Function failed: read_subpackage_metadata
ERROR: Logfile of failure stored in:
/home/sfm/YOCTO/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/bluez5/5.21-r1/temp/log.do_package_write_rpm.31553
NOTE: recipe bluez5-5.21-r1: task do_package_write_rpm: Failed
ERROR: Task 2107
(/home/sfm/YOCTO/poky/meta/recipes-connectivity/bluez5/bluez5_5.21.bb
<http://bluez5_5.21.bb> <http://bluez5_5.21.bb>,
do_package_write_rpm) failed with exit code '1'
attached the log file for the same.
Best regards
Anoop
On Wed, Aug 20, 2014 at 4:12 PM, Anoop Babu
<[email protected] <mailto:[email protected]>
<mailto:[email protected] <mailto:[email protected]>>>
wrote:
Thank you Kevin. Yes I have to admit that I have totally gone
wrong here. I will make the changes as suggested.
Regards
Anoop
On Tue, Aug 19, 2014 at 8:54 PM, Kévin THIERRY
<[email protected]
<mailto:[email protected]>
<mailto:[email protected]
<mailto:[email protected]>>> wrote:
On 19/08/2014 17:10, Anoop Babu wrote:
Dear Xiaver,
Further to making the changes you have suggested
unfortunately I still cannot get over the error. I
doubt
whether mesa_%.bbappend file has more to it than
what i
have added based on your inputs. Please share your
thoughts
I have attached the logs for your reference.
Best regards
Anoop
On Mon, Aug 18, 2014 at 7:38 PM, Anoop Babu
<[email protected]
<mailto:[email protected]> <mailto:[email protected]
<mailto:[email protected]>>
<mailto:[email protected]
<mailto:[email protected]>
<mailto:[email protected]
<mailto:[email protected]>>>> wrote:
Dear Xavier,
Thank you for your valuable inputs. I do not have
mesa_%.bbappend
file in mesa. But i have created one and add the
change that you
have mentioned.
Best regards
Anoop
I think you looked in the wrong directory. There is a
mesa_%.bbappend in meta-tizen/recipes-graphics/mesa/.
Try the
modification Xavier gave you in this file, it may work
(and
remove the one you created).
On Mon, Aug 18, 2014 at 6:47 PM, Xavier Roche
<[email protected]
<mailto:[email protected]>
<mailto:[email protected]
<mailto:[email protected]>>
<mailto:[email protected]
<mailto:[email protected]>
<mailto:[email protected]
<mailto:[email protected]>>>>
wrote:
Hi Anoop,
I'm currently working on making an arm
based yocto
tizen image.
As you can read in Kevin's weekly report,
there
are still
several things to fix in order to build a
suitable
image.
I will create a specific qemuarm recipe
you could
then refer
to for your IMX6 target. I won't publish this
recipe for the
moment since major fixes (related on RPM
staff)
are supposed
to be pushed on meta-tizen ASAP..
In the mid-time I would recommend you to
manually
deactivate
mesa gallium driver in :
/recipes-graphics/mesa/mesa_%.bbappend :
-GALLIUMDRIVERS_append = ",i915"
\ No newline at end of file
+#GALLIUMDRIVERS_append = ",i915"
Best regards,
Xavier
_______________________________________________
Dev mailing list
[email protected]
https://lists.tizen.org/listinfo/dev
