Dear kevin, Unfortunately there is just a blink in the display unit after bootup. i.MX6 board is connected to display unit via HDMI.
Yes you are correct kernel used here with imx6qsabreauto is 3.10. I shall check on the usage of kernel 3.14 as recommended by you. Best regards Anoop On Tue, Sep 16, 2014 at 7:10 PM, Kévin THIERRY < [email protected]> wrote: > Hi Anoop, > > Thanks for the feedback ! It's nice to know that an ARM image boots ! The > tizen-core-image-minimal ships the default weston so it should be possible > to get the UI working. > > Something we didn't look before: the kernel used with the imx6qsabreauto > is 3.10 (if I'm not wrong) but the kernel we use in Tizen is 3.14. I think > a kernel 3.14 would be better, especially regarding smack support (which > may be linked to weston not being launched on your device). > > Best regards, > Kevin > > On 16/09/2014 15:29, Anoop Babu wrote: > >> Dear Kevin, >> >> Happy to let you know that image has been build and tested successfully >> (command prompt available) for i.MX6 board. A big thank you, understanding, >> corporation for this success. >> Next stage look forward for Tizen UI and display. >> >> Best regards >> Anoop >> >> >> On Sat, Sep 13, 2014 at 3:08 PM, Anoop Babu <[email protected] >> <mailto:[email protected]>> wrote: >> >> Dear Kevin, >> >> Great news. I kindheartedly thank you and team for this wonderful >> break through. I would build with the mentioned changes and update >> you with the results. (I'm out till Tuesday regret the delay) >> >> >> Best regards >> Anoop >> >> >> On Fri, Sep 12, 2014 at 4:12 PM, Kévin THIERRY >> <[email protected] >> <mailto:[email protected]>> wrote: >> >> Hi Anoop, >> >> We found what was the issue and successfully built an ARM >> image (thanks to Ronan) ! Of course we didn't test the image >> since we don't have the corresponding board. >> >> The issue was that rpm checks an OS value when installing >> packages and it probably doesn't know the value that is set. >> Th solution is to add a flag to prevent this checking. >> >> I attached the patch for meta-tizen to this mail (the patch >> also removes mesa from the image). Once you succesfully built >> an image, can you please test it and tell us how it goes ? I'm >> very curious about it :) >> >> Regards, >> Kevin >> >> >> On 09/09/2014 17:13, Anoop Babu wrote: >> >> Dear kevin, Xavier, >> >> I'm not able to figure out what is going wrong with do >> rootfs and installation, which in turn is giving rise to >> error: package ..... is intended for a different >> operating system. >> >> Any inputs from your side is highly appreciated. >> >> Best regards >> Anoop >> >> >> On Mon, Sep 1, 2014 at 2:13 AM, Anoop Babu >> <[email protected] <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>>> wrote: >> >> Dear Xavier, >> >> Any updates for me from your side? Do you require any >> particular >> logs/files for further analysis? >> >> Best regards >> Anoop >> >> >> On Thu, Aug 28, 2014 at 3:13 PM, Kévin THIERRY >> <[email protected] >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>>> wrote: >> >> Change Xavier mail to the correct one. >> >> Kevin >> >> >> >> On 28/08/2014 11:21, Anoop Babu wrote: >> >> Dear Xaiver, >> >> Kevin had informed about you being on vocation >> till >> Thursday . I was awaiting your return to get >> some inputs >> to overcome this final stage do rootfs error. >> >> I had posted the issue to Yocto group based on >> Kevin's >> suggestion, but unfortunately no inputs have come. >> >> Best regards >> Anoop >> >> >> >> On Fri, Aug 22, 2014 at 6:50 PM, Kévin THIERRY >> <[email protected] >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>> >> <mailto:[email protected] >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>>>> wrote: >> >> Hi Anoop, >> >> I don't know this error, maybe it is >> related to the >> issue Xavier >> has ? I'm sorry but I can't help you much >> on this >> right now. >> Xavier might be able to help you but he is >> now on >> holidays. He >> will be back on Thursday next week. Maybe >> you can look >> at the >> bitbake code to see what is the issue >> and/or ask the >> Yocto guys. >> >> Best regards, >> Kevin >> >> >> On 22/08/2014 14:39, Anoop Babu wrote: >> >> Dear Kevin, >> >> Thank you for your valuable inputs. I >> commented >> out statement >> related egl and gallium egl, with that >> I could >> proceed to >> overcome the mesa package error. >> Finally was able to reach do_rootfs >> stage, where >> it broke >> down stating mesa installation errors >> for which I >> had comment >> out dependencies as you had mentioned. >> I could over come that error but hit >> upon another >> series of >> error. I have attached the log files >> for the same. >> Hope clear this hurdle. Expecting you >> valuable inputs. >> >> Please find the attached log files. >> >> Best regards >> Anoop >> >> >> Best regards >> A.B >> PPlease think about the environment before >> printing this e-mail >> >> / >> >> *7*Switch off as you go |*q*Always >> recycle |*P*Save a >> tree...please don't print this e-mail >> unless you >> really need to. >> >> / >> >> >> >> On Wed, Aug 20, 2014 at 6:18 PM, Kévin >> THIERRY >> <[email protected] >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>> >> <mailto:kevin.thierry@open. >> eurogiciel.org >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>>> >> <mailto:kevin.thierry@open. >> eurogiciel.org >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>> >> <mailto:kevin.thierry@open. >> eurogiciel.org >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>>>>> wrote: >> >> Hi Anoop, >> >> If don't mind not having mesa >> maybe you can >> just remove it >> from >> the image recipe. In >> meta-tizen/recipes-image/tizen >> -core-image-minimal.bb >> <http://tizen-core-image-minimal.bb> >> <http://tizen-core-image-minimal.bb> >> <http://tizen-core-image-minimal.bb> >> <http://tizen-core-image- >> minimal.bb> comment >> or remove >> those lines: >> >> >> CORE_IMAGE_BASE_INSTALL += "mesa-megadriver" >> CORE_IMAGE_BASE_INSTALL += "libegl-gallium" >> CORE_IMAGE_BASE_INSTALL += "libegl-mesa" >> CORE_IMAGE_BASE_INSTALL += "libgbm" >> CORE_IMAGE_BASE_INSTALL += "libgbm-gallium" >> CORE_IMAGE_BASE_INSTALL += >> "mesa-driver-pipe-nouveau" >> CORE_IMAGE_BASE_INSTALL += >> "mesa-driver-pipe-swrast" >> CORE_IMAGE_BASE_INSTALL += >> "mesa-driver-pipe-vmwgfx" >> CORE_IMAGE_BASE_INSTALL += "mesa-driver-pipe-i915" >> CORE_IMAGE_BASE_INSTALL += "libgles1-mesa" >> CORE_IMAGE_BASE_INSTALL += "libgles2-mesa" >> >> Regarding BlueZ 5 I think it is an >> upstream >> recipe and >> I've never >> had this kind of error. Try to >> google it and >> if you find >> nothing >> look at what bitbake is trying to >> do directly >> in the code. >> You can >> also ask the Yocto guys on the >> relevant yocto >> mailing list or >> directly on IRC. Also you may want >> to clean >> the bluez5 >> project and >> try to build it again in case your >> environment >> has been >> corrupted >> (bitbake bluez5 -c cleanall). >> >> I hope this help, >> Kevin >> >> >> >> On 20/08/2014 14:10, Anoop Babu wrote: >> >> Dear Kevin, Xavier, >> >> I have commented out >> GALLIUMDRIVERS_append >> = ",i915" in >> mesa_%.bbappend under >> meta-tizen/recipes-graphics/mesa/. >> Unfortunately I haven't overcome the do >> configure >> error for >> mesa - ERROR: oe_runconf failed. >> >> I also hit upon another error. >> ERROR: Recipe bluez5 is trying >> to change >> PR from 'r1' to >> 'r11'. This will cause >> do_package_write_* >> failures >> since the >> incorrect data will be used >> and they will >> be unable to >> find >> the right workdir. >> ERROR: Function failed: >> read_subpackage_metadata >> ERROR: Logfile of failure >> stored in: >> /home/sfm/YOCTO/build/tmp/ >> work/cortexa9hf-vfp-neon-poky-linux-gnueabi/bluez5/5.21-r1/ >> temp/log.do_package_write_rpm.31553 >> NOTE: recipe bluez5-5.21-r1: task >> do_package_write_rpm: Failed >> ERROR: Task 2107 >> (/home/sfm/YOCTO/poky/meta/ >> recipes-connectivity/bluez5/bluez5_5.21.bb >> <http://bluez5_5.21.bb> >> <http://bluez5_5.21.bb> >> <http://bluez5_5.21.bb> >> <http://bluez5_5.21.bb> >> <http://bluez5_5.21.bb>, >> >> do_package_write_rpm) failed with exit code '1' >> >> >> attached the log file for the >> same. >> >> Best regards >> Anoop >> >> >> >> On Wed, Aug 20, 2014 at 4:12 >> PM, Anoop Babu >> <[email protected] >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>> >> <mailto:[email protected] <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>>> >> <mailto:[email protected] >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>> >> <mailto:[email protected] <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>>>> >> <mailto:[email protected] >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>> >> <mailto:[email protected] >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>>> >> <mailto:[email protected] >> <mailto:[email protected]> <mailto:[email protected] >> <mailto:[email protected]>> >> <mailto:[email protected] >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>>>>>> >> wrote: >> >> Thank you Kevin. Yes I >> have to admit >> that I have >> totally gone >> wrong here. I will make >> the changes as >> suggested. >> >> Regards >> Anoop >> >> >> >> >> On Tue, Aug 19, 2014 at >> 8:54 PM, Kévin >> THIERRY >> < >> [email protected] >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>> >> <mailto:kevin.thierry@open. >> eurogiciel.org >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>>> >> <mailto: >> [email protected] >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>> >> <mailto:kevin.thierry@open. >> eurogiciel.org >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>>>> >> <mailto:[email protected] >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>> >> <mailto:kevin.thierry@open. >> eurogiciel.org >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>>> >> >> <mailto: >> [email protected] >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>> >> <mailto:kevin.thierry@open. >> eurogiciel.org >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>>>>>> wrote: >> >> >> On 19/08/2014 17:10, >> Anoop Babu wrote: >> >> Dear Xiaver, >> >> Further to making the changes >> you have >> suggested >> unfortunately I still cannot get over the >> error. I >> doubt >> whether mesa_%.bbappend file >> has more to >> it than >> what i >> have added based on your >> inputs. Please >> share your >> thoughts >> I have attached the logs for >> your reference. >> >> Best regards >> Anoop >> >> >> >> On Mon, Aug 18, 2014 at 7:38 >> PM, Anoop Babu >> <[email protected] <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>> >> <mailto:[email protected] >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>>> >> <mailto:[email protected] >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>> >> <mailto:[email protected] >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>>>> >> <mailto:[email protected] >> <mailto:[email protected]> <mailto:[email protected] >> <mailto:[email protected]>> >> <mailto:[email protected] >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>>> >> <mailto:[email protected] >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>> >> <mailto:[email protected] >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>>>>> >> <mailto:[email protected] >> <mailto:[email protected]> <mailto:[email protected] >> <mailto:[email protected]>> >> <mailto:[email protected] >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>>> >> <mailto:[email protected] >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>> >> <mailto:[email protected] >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>>>> >> >> <mailto:[email protected] >> <mailto:[email protected]> <mailto:[email protected] >> <mailto:[email protected]>> >> <mailto:[email protected] >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>>> >> <mailto:[email protected] >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>> >> <mailto:[email protected] >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>>>>>>> wrote: >> >> Dear Xavier, >> >> Thank you for your valuable inputs. I >> do not have >> mesa_%.bbappend >> file in mesa. But i have >> created one >> and add the >> change that you >> have mentioned. >> >> Best regards >> Anoop >> >> I think you looked in >> the wrong >> directory. >> There is a >> mesa_%.bbappend in >> meta-tizen/recipes-graphics/mesa/. >> Try the >> modification Xavier gave you in >> this file, it >> may work >> (and >> remove the one you created). >> >> >> >> >> On Mon, Aug 18, 2014 at >> 6:47 PM, >> Xavier Roche >> <[email protected] >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>> >> <mailto:[email protected] >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>>> >> <mailto:xavier.roche@ >> eurogiciel.fr >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>> >> <mailto:[email protected] >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>>>> >> <mailto:[email protected] >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>> >> <mailto:[email protected] >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>>> >> <mailto:xavier.roche@ >> eurogiciel.fr >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>> >> <mailto:[email protected] >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>>>>> >> <mailto:[email protected] >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>> >> <mailto:[email protected] >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>>> >> <mailto:xavier.roche@ >> eurogiciel.fr >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>> >> <mailto:[email protected] >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>>>> >> >> <mailto:[email protected] >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>> >> <mailto:[email protected] >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>>> >> <mailto:xavier.roche@ >> eurogiciel.fr >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>> >> <mailto:[email protected] >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>>>>>>> >> >> wrote: >> >> Hi Anoop, >> >> I'm currently working on making an arm >> based yocto >> tizen image. >> As you can read in Kevin's weekly >> report, >> there >> are still >> several things to fix in order to >> build a >> suitable >> image. >> I will create a specific qemuarm >> recipe >> you could >> then refer >> to for your IMX6 target. I won't >> publish this >> recipe for the >> moment since major fixes (related >> on RPM >> staff) >> are supposed >> to be pushed on meta-tizen ASAP.. >> >> In the mid-time I would recommend >> you to >> manually >> deactivate >> mesa gallium driver in : >> /recipes-graphics/mesa/mesa_%.bbappend : >> >> -GALLIUMDRIVERS_append = ",i915" >> \ No newline at end of file >> +#GALLIUMDRIVERS_append = ",i915" >> >> >> Best regards, >> >> Xavier >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >
_______________________________________________ Dev mailing list [email protected] https://lists.tizen.org/listinfo/dev
