Zhang, could you please confirm that you can join a Wifi network with the test program provided with the package which use the CAPI. Obviously it works with direct Conman command but that is not the objective.
Please provide the configuration that has allowed you to positively run the tests via the CAPI. regards Dominig Le 06/11/2014 09:48, Zhang, Zhengguang a écrit : > > Hi, Nicolas > > Thanks for your review to the patches. > > I tried to reproduce the issue you mentioned in you previous mail, but > I can’t reproduce it. > > Besides, it seems the ConnMan log you attached is not complete, so > there is no valuable info in it. > > So my suggestion is: > > Could you verify it through ConnMan by command line? Which means that > you can use connmanctl to register agent to input passphrase, so that > it can make clear whether it is a ConnMan issue or an upper layer > issue. If it is an upper layer issue, we will fix it later after the > patches are merged. > > > > Thanks, > > Zhang Zhengguang > > > > *From:*Nicolas Guyomard [mailto:[email protected]] > *Sent:* Wednesday, November 5, 2014 10:18 PM > *To:* Zhang, Zhengguang > *Cc:* [email protected] > *Subject:* Re: [Dev] winet multi-user feature > > > > Hi Zhang Zhengguang, > > As I told you in review https://review.tizen.org/gerrit/#/c/29712/ I > cannot connect to an AP using your patches adding multi-user support > in connman. > > I use tizen-common_20141104.3 image on VTC1010. > > I uninstalled net-config, updated connman and installed > capi-network-wifi, capi-network-wifi-test, connman-lib, winet and > winet-lib. > > Then I connect as user alice, launch > /usr/lib64/winet-capi-test/capi-wifi-test and perform the following > actions in this application: > > 1 (Wi-Fi init and set callbacks) > Event received from stdin > Wifi init succeeded > Operation finished! > > 5 (Is Wi-Fi activated?) > Event received from stdin > Success to get Wi-Fi device state : TRUE > Operation finished! > > 6 (Get connection state) > Event received from stdin > Success to get connection state : Disconnected > Operation finished! > > 7 (Scan request) > Event received from stdin > Scan request succeeded > Operation finished! > > b (Get AP list) > Event received from stdin > AP name : 0104 > AP BSSID : e0:46:9a:08:8e:db, state : Disconnected > AP name : EUROGICIEL > AP BSSID : 04:a1:51:83:f5:d0, state : Disconnected > AP name : DIRECT-GO-wfd-eurogiciel > AP BSSID : 62:02:b4:07:87:5e, state : Disconnected > AP name : FreeWifi > AP BSSID : f4:ca:e5:c4:b0:1d, state : Disconnected > AP name : Livebox-0ee9 > AP BSSID : 00:19:70:74:90:e3, state : Disconnected > AP name : Wifi_Breitinfo > AP BSSID : 50:67:f0:39:23:3e, state : Disconnected > Get AP list finished > Operation finished! > > c (Connect) > Event received from stdin > Input a BSSID to connect : 04:a1:51:83:f5:d0 > get AP ap_bssid_input 04:a1:51:83:f5:d0, BSSID [e0:46:9a:08:8e:db] > get AP ap_bssid_input 04:a1:51:83:f5:d0, BSSID [04:a1:51:83:f5:d0] > Input passphrase for 04:a1:51:83:f5:d0 : ************ > Success to connection request [04:a1:51:83:f5:d0] > Connection step finished > Operation finished! > > Wi-Fi Connection Failed! error : OPERATION_FAILEDEvent received from stdin > > 6 (Get connection state) > Event received from stdin > Success to get connection state : Disconnected > Operation finished! > > a (Get Connected AP) > Event received from stdin > Fail to get essid [INVALID_PARAMETER] > Operation failed! > > You will find the connman log in attachment. > > If I apply the patch in attachment to connman, I can connect to the AP. > > Regards, > Nicolas Guyomard > > Le 28/10/2014 01:59, Zhang, Zhengguang a écrit : > > Hi, All > > WiNet multi-user solution related patches have been updated and > optimized, please help to review it again, thanks in advance! > > https://review.tizen.org/gerrit/#/c/28918/ > > https://review.tizen.org/gerrit/#/c/28921/ > > https://review.tizen.org/gerrit/#/c/28922/ > > https://review.tizen.org/gerrit/#/c/28923/ > > https://review.tizen.org/gerrit/#/c/28924/ > > > > > > Regards, > > Zhang Zhengguang > > > > -----Original Message----- > > From: Von Dentz, Luiz [mailto:[email protected]] > > Sent: Friday, October 17, 2014 3:32 PM > > To: Zhang, Zhengguang > > Cc: Dominig ar Foll (Intel OTC); Nicolas Guyomard; > [email protected] <mailto:[email protected]>; Liu, > > Bingwei > > Subject: Re: [Dev] winet multi-user feature > > > > Hi, > > > > Apparently you guys are not synchronizing with Bluetooth, anyway this > looks > > better but if you are doing a blocking call to GetConnectionUnixUser > perhaps > > it is better to use dbus_bus_get_unix_user since it is probably doing > the same > > thing anyway. > > > > On Fri, Oct 17, 2014 at 9:22 AM, Zhang, Zhengguang > > <[email protected]> <mailto:[email protected]> > wrote: > > Hi, Dominique > > > > We have finished the phrase 1 source code in ConnMan to meet WiNet > > multi-user requirements, and submitted them to gerrit: > > > > https://review.tizen.org/gerrit/#/c/28918/ > > > > https://review.tizen.org/gerrit/#/c/28921/ > > > > https://review.tizen.org/gerrit/#/c/28922/ > > > > https://review.tizen.org/gerrit/#/c/28923/ > > > > https://review.tizen.org/gerrit/#/c/28924/ > > > > > > > > I have verified the solution and found it can meet the > requirements, > > please help to review the patches and any suggestions, feel free > to > > let me know, thanks in advance! > > > > > > > > > > > > Regards, > > > > Zhang Zhengguang > > > > > > > > From: Dev [mailto:[email protected]] On Behalf Of > Dominig ar > > Foll (Intel OTC) > > Sent: Wednesday, October 8, 2014 4:30 PM > > Cc: [email protected] <mailto:[email protected]> > > Subject: Re: [Dev] winet multi-user feature > > > > > > > > Zhang, > > > > happy to see that you have plan to deliver the required feature. > > When will we see the code ? > > > > "Nicolas Guyomard" <[email protected]> > <mailto:[email protected]> will be the > > engineer in charge of the integration in Common once your code is > ready. > > He is present on this list. > > > > Regards > > > > Dominig ar Foll > > > > Senior Software Architect > > > > Open Source Technology Centre > > > > Intel SSG > > > > Le 08/10/2014 10:03, Zhang, Zhengguang a écrit : > > > > Hi, Dominique > > > > After our investigation about how to implement WiNet multi-user > > requirements, we found that it’s the right way to implement it in > > ConnMan, the reason is described below: > > > > 1. ConnMan is the real connection manager daemon, and it > should > > handle > > multi-user related stuff logically. WiNet service daemon is only a > > slim daemon which is designed to make some background operations, > such > > as trigger periodically scan, tethering data statistics and son > on. > > > > > > > > 2. ConnMan has already supported a feature “Session” which > can > > be used > > to implement multi-user, but we found that it’s not mature enough > and > > a little too complicated, after a balance about the schedule and > the > > solution, our proposal solution is: > > > > 1). At the first phrase, add ConnMan patches ourselves to > implement > > multi-user and maintain them in Tizen ConnMan, by our > investigation, > > we only need less than 5 patches to implement the requirement. > It’s > > not a problem to maintain the related patches in Tizen and not > submit > > them to upstream, actually, we have already maintained more than > 20 > > patches in Tizen ConnMan to meet Samsung specific requirements, > which > > can’t be merged into ConnMan upstream. So Tizen ConnMan is a > little > > different with upstream Connman: > > upstream ConnMan is common to every platform, but Tizen ConnMan is > > specific for Tizen platform. > > > > 2). At the second phrase, when multi-user requirements is nailed > down > > completely and ConnMan session is mature, we will continue to > > investigate it and try to switch the solution to ConnMan session. > > > > > > > > Currently at the first stage, we will submit the related patches > to > > gerrit, we will add you guys as the reviewers, any suggestions > about > > it, feel free to let me know, thanks! > > > > > > > > > > > > Regards, > > > > Zhang Zhengguang > > > > > > > > > > > > > > _______________________________________________ > > Dev mailing list > > [email protected] <mailto:[email protected]> > > https://lists.tizen.org/listinfo/dev > > > > > > > > _______________________________________________ > Dev mailing list > [email protected] > https://lists.tizen.org/listinfo/dev -- Dominig ar Foll Senior Software Architect Intel Open Source Technology Centre _______________________________________________ Dev mailing list [email protected] https://lists.tizen.org/listinfo/dev
