Hi Pintu,
On 10.03.2016 11:57, PINTU KUMAR wrote:
Samsung Enterprise Portal mySingle
Hi,
Thank you for your reply.
Right now, I am trying only on Raspberry Pi 2 hardware. For Beagle
bone may be I will try later.
Right now, I cannot use Yocto, so I am using GBS build.
Right now, I don't want to use Micro profile (as its usage is limited).
I guess, to just get a shell (login prompt) on the virtual terminal, I
don't need to modify any source code and build it.
It should work with any profile, and pre-built image I choose.
Do, I need to make any changes in systemd-services on the target itself?
My requirement is simple:
I needed a pre-built Tizen images (any profile, either common or
mobile, either 2.4 or 3.0), that contains {rootfs.img,
system-data.img, user.img}.
So, that I can boot these images on Raspberry Pi, using the Raspberry
Pi Kernel 4.1.16, and login to the shell on virtual terminal.
Then, from the shell, I should be able to configure, Bluetooth, Wi-Fi,
and capture camera images (using PI2 CSI camera).
For that, please point me to the right pre-built images that I can use
it for booting.
Which one, should I try from the below:
1> https://download.tizen.org/ ???
2> https://download.tizen.org/snapshots/tizen/common/ ???
3> https://download.tizen.org/snapshots/tizen/mobile/latest/images/ ???
4>
https://download.tizen.org/snapshots/2.4-mobile/common/latest/images/ ???
5> https://download.tizen.org/releases/2.4/2.4-mobile/latest/images/ ??
6> Any other from: https://download.tizen.org
<https://download.tizen.org/> ???
As I mentioned in my previous email the right pre-built Tizen images for
Raspberry Pi 2 are provided by Samsung Open Source Group:
https://files.s-osg.org/tizen-on-rpi2/
Follow the instructions from chapter "Use the Image" of the article
below to boot successfully Tizen on your Raspberry Pi 2:
https://blogs.s-osg.org/tizen-rpi2-now-supporting-3d-acceleration/
Best regards, Leon
Thank You!
With Regards,
Pintu Kumar
------- *Original Message* -------
*Sender* : Leon Anavi<[email protected]>
*Date* : Mar 10, 2016 12:59 (GMT+05:30)
*Title* : Re: [Dev] Fwd: Re: Re: Tizen common profile porting on new h/w
Hi Pintu,
It is great that you are interested in the porting Tizen to new
devices. Please have a look at my comments below.
On 10.03.2016 05:31, PINTU KUMAR wrote:
Hi,
I wanted to port Tizen platform in one of the ARM based open hardware such as
BeagleBone, Raspberry Pi.
So, I thought, I will start with the Tizen 3.0 common profile and create my own
custom profile.
As you have already seen Tizen 3.0 Common has been already ported to
Raspberry Pi using the Yocto Project. You can try porting Tizen 3.0
Micro or Common to BeagleBone using meta-ti:
http://git.yoctoproject.org/cgit/cgit.cgi/meta-ti/
On 10.03.2016 05:31, PINTU KUMAR wrote:
So, I thought, I will start with the Tizen 3.0 common profile and create my own
custom profile.
My presentation from Tizen Developer Conference 2015 provides
guidelines how to create custom Tizen profile using the Yocto Project:
http://www.slideshare.net/leonanavi/creating-new-tizen-profiles-using-the-yocto-project
On 10.03.2016 07:46, PINTU KUMAR wrote:
Dear Mr. Inki-Dae,
Thank you very much for your reply.
Yes, I am already aware about Tizen Yocto image for raspberry pi. I
have already tried it and I can boot successfully till the
desktop/display screen.
Due to the firewall restrictions (and PC space limits), I cannot
build the Yocto image.
There are two build systems for Tizen 3.0 profiles: Git Build System
(GBS) and Yocto / Openembedded. Both require a lot of disk space and
powerful hardware of the build machine. Unfortunately you can not port
Tizen properly if you are not using any of the build systems.
So, I tried with the pre-build images, but, I am not getting any
output on the virtual terminal by connecting an HDMI to my computer
monitor (tty1).
Unfortunately, I don't have a serial UART cable right now (for
raspberry pi), so I haven't tried it yet using UART.
Have you tried the pre-build images for Raspberry Pi? They are
available here:
https://files.s-osg.org/tizen-on-rpi2/
Several months ago I have tried the pre-build Tizen Common image for
Raspberry Pi 2 and it booted fine.
Also, at this moment, I don't want the graphical display (for my use
case), so I just want to drop it to console and execute some commands.
Moreover, I wanted to start things from scratch using the existing
Tizen images either from common profile or others.
Please let me know which image to choose.
Also, let me know, how to enable virtual console on Tizen (using
systemd?)
If you are not interested in the graphical user interface I recommend
you to use Tizen Micro profile. It was been already ported for
Raspberry Pi. In general porting Micro to new h/w is easier than
Common as it does not have GUI and you will not need to enable
Wayland/Weston. You can build Tizen Micro using the Yocto project.
More information about Tizen Micro is available here:
https://wiki.tizen.org/wiki/Tizen_Micro
Best regards, Leon
Thank You!
With Regards,
Pintu Kumar
------- *Original Message* -------
*Sender* : In-Ki Dae<[email protected]> S5/Senior Engineer/Tizen
Platform Lab./Samsung Electronics
*Date* : Mar 10, 2016 09:47 (GMT+05:30)
*Title* : Re: [Dev] Tizen common profile porting on new h/w
Hi,
2016년 03월 10일 12:31에 PINTU KUMAR 이(가) 쓴 글:
> Hi,
>
> I wanted to port Tizen platform in one of the ARM based open
hardware such as BeagleBone, Raspberry Pi.
> So, I thought, I will start with the Tizen 3.0 common profile and
create my own custom profile.
>
> But, when I see, in http://download.tizen.org/ there are so many
Tizen images available.
> I am really confused which one to choose. There is no clear
documentation which explains about it.
>
> So, I tried one of the images from:
> http://download.tizen.org/snapshots/tizen/common/
>
http://download.tizen.org/snapshots/tizen/common/latest/images/arm-wayland/
>
http://download.tizen.org/snapshots/tizen/common/latest/images/arm-wayland/common-wayland-3parts-armv7l-odroidu3/
(tizen-common_20160309.1_common-wayland-3parts-armv7l-odroidu3.tar.gz)
>
> Because, I just need the rootfs.img, system-data.img,
user.img (only the Tizen platform).
> I already have my own boot loader and Linux Kernel (Raspberry Pi).
>
> Now, my questions are as follows:
>
> 1) Am I using the correct image to create a new profile? Will it
work for me?
>
> 2) When I try to boot the image on Raspberry Pi, I am not able to
get the Login prompt on my virtual terminal (tty1).
> Please let me know what changes are required to get the login
prompt?
>
> Note: I have made the required changes in Kernel (as per Tizen) but
disabled DRM (as I am not interested in Display).
> Like, I have already enabled SMACK in kernel.
>
> 3) If I am not using the correct image, please point me to the
right image, to start with.
>
I believe below link could provide what you need for Tizen porting,
https://wiki.tizen.org/wiki/RaspberryPi
Thanks,
Inki Dae
>
>
>
> Regards,
> Pintu
> _______________________________________________
> Dev mailing list
> [email protected]
> https://lists.tizen.org/listinfo/dev
>
>
--
Leon Anavi
Software Engineer
konsulko.com
_______________________________________________
Dev mailing list
[email protected]
https://lists.tizen.org/listinfo/dev
