Hi,
I haven't received the reply yet.
If this is not the right forum, please point me to the correct mailing list related to bluez.
Thank You!
With Regards,
Pintu Kumar
------- Original Message -------
Sender : PINTU KUMAR<[email protected]> Senior Chief Engineer/SRI-Bangalore-Kernel & BSP/Samsung Electronics
Date : Mar 14, 2016 14:59 (GMT+05:30)
Title : Tizen common 3.0 - Bluetooth setup and communication
To : [email protected] Vishnu Pratap Singh<[email protected]> Rohit Kumar<[email protected]>
Dear Tizen Mailing list,
I need help to setup Bluetooth (power on, connect, pair, send/receive char) from command line.
I am using Tizen common 3.0 image from here:
And, my hardware is: Raspberry Pi (BCM2836).
I am able to boot the Tizen platform successfully, and get the login prompt (For know command line login is fine, and I don't need the full UI).
Also, I am able to connect WIFI using the connmanctrl.
But, I am not able to configure Bluetooth from commands.
I am using the Bluetooth USB dongle, and all drivers/firmware are loaded successfully.
I am also able to scan the nearby Bluetooth devices using:
# hcitool scan
Scanning.....
AA:BB:CC:DD:EE:FF:GG <Samsung Z1>
But, now what, I wanted to know how to connect & pair with these BT devices from commands.
I have only the following commands in my image:
hciconfig, hcitool, hciattach,
sdptool,
Bluetooth-fwk-test,
Bluetooth-share
Note, I don't have the "bluetoothctrl" command present on Tizen.
I tried this on Raspberry Pi Raspbian platform, it works perfectly fine using bluetoothctrl.
So, my question is:
How can I install bluetoothctrl command on Tizen common 3.0 image?
Please point me to the Tizen repo that contains this package.
I can use GBS build & RPM command to install this package and get bluetoothctrl command.
Once, this is solved, then I have few more questions to discuss.
Please help.....
Thank You!
With Regards,
Pintu Kumar
|
|
_______________________________________________ Dev mailing list [email protected] https://lists.tizen.org/listinfo/dev
