Thanks Leon for the information.
And, sorry for the typo (bluetoothctl).
Yes, I could able to get bluetoothctl command and setup BT connection, after downloading and installing the Bluetooth-test RPM from the common repo.
Thank You!
With Regards,
Pintu Kumar
------- Original Message -------
Sender : Leon Anavi<[email protected]>
Date : Mar 15, 2016 18:31 (GMT+05:30)
Title : Re: [Dev] Fwd: Tizen common 3.0 - Bluetooth setup and communication
Please note that the right spelling is bluetoothctl (without r). Btw it is present in the image of Tizen Common for Raspberry Pi 2 built with Yocto/OE. I have used it to setup a demo for Bluetooth pairing of Tizen on rpi2 with Android and Tizen smartphones. I have shared the exact steps and details in the wiki:Hi,
Thank you very much for your reply.
I know about bt_unit_test and tried it, but I think it requires popup in UI for the pairing confirmation.
I don't have the UI up right now since Graphics is not up. I just booted the device till command prompt.
So, I wanted to use "bluetoothctrl" which is the standard Bluetooth setup command in Linux.
So, I wanted to know why rpm contains this bluetoothctrl command.
https://wiki.tizen.org/wiki/Connecting_to_a_Smartphone_with_Bluetooth_and_Making_Phone_Calls
Best regards, Leon
Thank You!
With Regards,
Pintu Kumar
------- Original Message -------
Sender : dohyun pyun<[email protected]> S5/Senior Engineer/Tizen Platform Lab./Samsung Electronics
Date : Mar 15, 2016 14:41 (GMT+05:30)
Title : Re: [Dev] Fwd: Tizen common 3.0 - Bluetooth setup and communication
Hi Pintu,
To use bluetooth functionality, we should launch bt-service daemon and set some flags.
So you need to use Tizen Native API instead of using console command.
Above link, you can download capi-network-bluetooth-test package. (Attachement)
https://download.tizen.org/snapshots/tizen/common/latest/repos/arm-wayland/packages/armv7l/
After installing the package, you can use 'bt_unit_test'.
bt_unit_test will call Tizen Native APIs and will launch bt-service.
I add Tizen platform's Bluetooth engineers, so you can ask us directly in later.
(HQ: Pyun / Woo / Lee, SRI-B: Sudha / Sandeep / Paras)
* Enable
17 -> 3 -> 2
* Scan
17 -> 3 -> 5
* Pair
17 -> 0 -> Input peer address -> 5 -> 11
bash-3.2# bt_unit_test
key_event_cb:6854()
tc_usage_print:655() Key 0 : usage SET ADDRESS
tc_usage_print:655() Key 1 : usage bt_initialize
tc_usage_print:655() Key 2 : usage bt_deinitialize
tc_usage_print:655() Key 3 : usage Adapter
tc_usage_print:655() Key 4 : usage Adapter LE
tc_usage_print:655() Key 5 : usage Device
tc_usage_print:655() Key 6 : usage Socket
tc_usage_print:655() Key 7 : usage Opp
tc_usage_print:655() Key 8 : usage Audio(ag, a2dp, call)
tc_usage_print:655() Key 9 : usage Pan(nap, panu)
tc_usage_print:655() Key 10 : usage Gatt
tc_usage_print:655() Key 11 : usage HPS
tc_usage_print:655() Key 12 : usage Avrcp
tc_usage_print:655() Key 13 : usage Hid
tc_usage_print:655() Key 14 : usage IPSP
tc_usage_print:655() Key 15 : usage HDP
tc_usage_print:655() Key 16 : usage Automated test
tc_usage_print:655() Key 17 : usage Initialize All
tc_usage_print:655() Key 255 : usage FINISH
Thanks,
Pyun
------- Original Message -------
Sender : PINTU KUMAR<[email protected]> Senior Chief Engineer/SRI-Bangalore-Kernel & BSP/Samsung Electronics
Date : 2016-03-15 17:43 (GMT+09:00)
Title : [Dev] Fwd: Tizen common 3.0 - Bluetooth setup and communication
Hi,
I haven't received the reply yet.
If this is not the right forum, please point me to the correct mailing list related to bluez.
Thank You!
With Regards,
Pintu Kumar
------- Original Message -------
Sender : PINTU KUMAR<[email protected]> Senior Chief Engineer/SRI-Bangalore-Kernel & BSP/Samsung Electronics
Date : Mar 14, 2016 14:59 (GMT+05:30)
Title : Tizen common 3.0 - Bluetooth setup and communication
To : [email protected] Vishnu Pratap Singh<[email protected]> Rohit Kumar<[email protected]>
Dear Tizen Mailing list,
I need help to setup Bluetooth (power on, connect, pair, send/receive char) from command line.
I am using Tizen common 3.0 image from here:
And, my hardware is: Raspberry Pi (BCM2836).
I am able to boot the Tizen platform successfully, and get the login prompt (For know command line login is fine, and I don't need the full UI).
Also, I am able to connect WIFI using the connmanctrl.
But, I am not able to configure Bluetooth from commands.
I am using the Bluetooth USB dongle, and all drivers/firmware are loaded successfully.
I am also able to scan the nearby Bluetooth devices using:
# hcitool scan
Scanning.....
AA:BB:CC:DD:EE:FF:GG <Samsung Z1>
But, now what, I wanted to know how to connect & pair with these BT devices from commands.
I have only the following commands in my image:
hciconfig, hcitool, hciattach,
sdptool,
Bluetooth-fwk-test,
Bluetooth-share
Note, I don't have the "bluetoothctrl" command present on Tizen.
I tried this on Raspberry Pi Raspbian platform, it works perfectly fine using bluetoothctrl.
So, my question is:
How can I install bluetoothctrl command on Tizen common 3.0 image?
Please point me to the Tizen repo that contains this package.
I can use GBS build & RPM command to install this package and get bluetoothctrl command.
Once, this is solved, then I have few more questions to discuss.
Please help.....
Thank You!
With Regards,
Pintu Kumar
_______________________________________________ Dev mailing list [email protected] https://lists.tizen.org/listinfo/dev
