You're welcome! If you would like to contribute to Mesos (what is highly encouraged!) please check this guide <https://mesos.apache.org/documentation/latest/mesos-developers-guide/>. AFAIK, you don't need to clone any svn repos for this : ).
On Fri, Nov 7, 2014 at 11:29 AM, Sweta Rani <swetarani3...@gmail.com> wrote: > But next I was trying to clone svn repo as I need to make changes in > main.css so I would need help in that > > > On Fri Nov 07 2014 at 3:57:52 PM Sweta Rani <swetarani3...@gmail.com> > wrote: > > > Yes I have done that. Now master and slave both are working. Thanks for > > help :) > > > > > > On Fri Nov 07 2014 at 3:55:29 PM Alex Rukletsov <a...@mesosphere.io> > > wrote: > > > >> Hi Sweta, > >> > >> I'm a bit confused about what works for you and what doesn't. Are you > now > >> able to start mesos-master and mesos-slave and launch an example > >> framework? > >> > >> On Thu, Nov 6, 2014 at 9:16 PM, Sweta Rani <swetarani3...@gmail.com> > >> wrote: > >> > >> > Cloning from svn repo gave following error: > >> > > >> > proxima@proxima-HP-Pavilion-m6-Notebook-PC:~/mesodoc$ rake > >> > Cloning Apache Mesos codebase > >> > Cloning into '/home/proxima/mesodoc/tmp/mesos'... > >> > remote: Counting objects: 1075, done. > >> > remote: Compressing objects: 100% (935/935), done. > >> > remote: Total 1075 (delta 221), reused 537 (delta 83) > >> > Receiving objects: 100% (1075/1075), 26.77 MiB | 171.00 KiB/s, done. > >> > Resolving deltas: 100% (221/221), done. > >> > Checking connectivity... done. > >> > Updating latest documentation from the Apache Mesos codebase > >> > Updating docs to the latest version > >> > rake aborted! > >> > Errno::ENOENT: No such file or directory - > >> > /home/proxima/mesodoc/source/documentation/latest/ > >> > running-torque-or-mpi-on-mesos.md > >> > /home/proxima/mesodoc/Rakefile:43:in `block in <top (required)>' > >> > Tasks: TOP => default => update_docs > >> > > >> > Neither I could get assets folder in this. How will I make changes? > >> > > >> > On Thu Nov 06 2014 at 10:55:38 PM Joris Van Remoortere < > >> > jo...@mesosphere.io> > >> > wrote: > >> > > >> > > If you run: mesos-slave.sh --help > >> > > Then you will see all the options you can pass to the slave. One of > >> them > >> > > is --port=VALUE > >> > > > >> > > Joris > >> > > > >> > > On Thu, Nov 6, 2014 at 6:39 AM, Sweta Rani <swetarani3...@gmail.com > > > >> > > wrote: > >> > > > >> > > > How can I change port for mesos-slave from default 5051 to 5052? > >> > > > > >> > > > *Sweta Rani* > >> > > > > >> > > > On Thu, Nov 6, 2014 at 7:58 PM, Sweta Rani < > swetarani3...@gmail.com > >> > > >> > > > wrote: > >> > > > > >> > > > > Alex, > >> > > > > > >> > > > > Done with master but unable to run slave using command > >> > > > "./bin/mesos-slave.sh > >> > > > > --master=127.0.0.1:5050" > >> > > > > Also the port 5051 is allocated with random work '-'. See this: > >> > > > > proxima@proxima:~/mesos/build$ netstat -ltnp | grep ':5051' > >> > > > > (Not all processes could be identified, non-owned process info > >> > > > > will not be shown, you would have to be root to see it all.) > >> > > > > tcp 0 0 0.0.0.0:5051 0.0.0.0:* > >> > > > > LISTEN - > >> > > > > proxima@proxima:~/mesos/build$ sudo kill -9 - > >> > > > > kill: failed to parse argument: '-' > >> > > > > proxima@proxima:~/mesos/build$ netstat -ltnp | grep ':5051' > >> > > > > (Not all processes could be identified, non-owned process info > >> > > > > will not be shown, you would have to be root to see it all.) > >> > > > > tcp 0 0 0.0.0.0:5051 0.0.0.0:* > >> > > > > LISTEN - > >> > > > > proxima@:~/mesos/build$ ./bin/mesos-slave.sh --master= > >> 127.0.0.1:5050 > >> > > > > WARNING: Logging before InitGoogleLogging() is written to STDERR > >> > > > > F1106 19:51:22.737992 6367 process.cpp:1532] Failed to > initialize, > >> > bind > >> > > > > 0.0.0.0:5051: Address already in use [98] > >> > > > > *** Check failure stack trace: *** > >> > > > > Aborted (core dumped) > >> > > > > > >> > > > > > >> > > > > *Sweta Rani* > >> > > > > > >> > > > > On Thu, Nov 6, 2014 at 7:07 PM, Alex Rukletsov < > >> a...@mesosphere.io> > >> > > > wrote: > >> > > > > > >> > > > >> Sweta, > >> > > > >> > >> > > > >> have you tried another port? > >> > > > >> > >> > > > >> On Thu, Nov 6, 2014 at 2:24 PM, Sweta Rani < > >> swetarani3...@gmail.com > >> > > > >> > > > >> wrote: > >> > > > >> > >> > > > >> > Joris > >> > > > >> > > >> > > > >> > Done with above commands, but now it gives following error: > >> > > > >> > WARNING: Logging before InitGoogleLogging() is written to > >> STDERR > >> > > > >> > F1106 18:50:48.117947 9706 process.cpp:1532] Failed to > >> > initialize, > >> > > > bind > >> > > > >> > 127.0.0.1:5050: Address already in use [98] > >> > > > >> > *** Check failure stack trace: *** > >> > > > >> > > >> > > > >> > I tried to solve it by > >> > > > >> > > >> > > > >> > > >> > > > >> > >> > > > http://stackoverflow.com/questions/10745878/ubuntu- > >> > > error-with-apache-98address-already-in-use > >> > > > >> > but it didnt work for me. > >> > > > >> > > >> > > > >> > > >> > > > >> > *Sweta Rani* > >> > > > >> > > >> > > > >> > On Wed, Nov 5, 2014 at 3:50 AM, Joris Van Remoortere < > >> > > > >> jo...@mesosphere.io> > >> > > > >> > wrote: > >> > > > >> > > >> > > > >> > > You need to make the directory and set the permissions to > the > >> > user > >> > > > you > >> > > > >> > are > >> > > > >> > > running the master as. > >> > > > >> > > > >> > > > >> > > For example: > >> > > > >> > > > >> > > > >> > > sudo mkdir /var/lib/mesos > >> > > > >> > > sudo chown jmlvanre /var/lib/mesos > >> > > > >> > > > >> > > > >> > > [jmlvanre] <run mesos master...> > >> > > > >> > > > >> > > > >> > > On Tue, Nov 4, 2014 at 2:07 PM, Sweta Rani < > >> > > swetarani3...@gmail.com > >> > > > > > >> > > > >> > > wrote: > >> > > > >> > > > >> > > > >> > > > Thanks for your help. I have installed mesos but unable > to > >> > > start > >> > > > >> mesos > >> > > > >> > > > master by the command > >> > > > >> > > > "./bin/mesos-master.sh --ip=127.0.0.1 > >> > > --work_dir=/var/lib/mesos". > >> > > > >> > > > > >> > > > >> > > > The file exists as "mesos-master.sh.in" in the bin > folder. > >> > > > >> > > > > >> > > > >> > > > It reports: > >> > > > >> > > > Failed to create work directory '/var/lib/mesos': > >> Permission > >> > > > denied > >> > > > >> > > > > >> > > > >> > > > *Sweta Rani* > >> > > > >> > > > > >> > > > >> > > > On Tue, Nov 4, 2014 at 2:50 PM, Adam Bordelon < > >> > > a...@mesosphere.io > >> > > > > > >> > > > >> > > wrote: > >> > > > >> > > > > >> > > > >> > > > > As an alternate workaround, if you don't need the Java > >> > support > >> > > > >> > (you're > >> > > > >> > > > not > >> > > > >> > > > > running a JVM framework like Spark/Hadoop/Marathon), > then > >> > you > >> > > > >> could > >> > > > >> > use > >> > > > >> > > > > `configure --disable-java` to skip all the maven/pom > >> build > >> > > > steps. > >> > > > >> > > > > > >> > > > >> > > > > By disabling Java, you could at least check that the > >> rest of > >> > > > Mesos > >> > > > >> > > builds > >> > > > >> > > > > and runs fine, which would still work with C++, Python, > >> or > >> > Go > >> > > > >> > > frameworks, > >> > > > >> > > > > or even any Java frameworks using the pure Java > bindings > >> > > > (jesos). > >> > > > >> > > > > > >> > > > >> > > > > On Mon, Nov 3, 2014 at 2:01 PM, Joris Van Remoortere < > >> > > > >> > > > jo...@mesosphere.io> > >> > > > >> > > > > wrote: > >> > > > >> > > > > > >> > > > >> > > > > > Did you verify that the settings.xml file was parsed > >> using > >> > > mvn > >> > > > >> -X? > >> > > > >> > > > > > > >> > > > >> > > > > > Specifically after the first few lines you will see > >> > > something > >> > > > >> along > >> > > > >> > > the > >> > > > >> > > > > > lines of: > >> > > > >> > > > > > [DEBUG] Reading global settings from > >> > > > >> > > /usr/share/maven/conf/settings.xml > >> > > > >> > > > > > [DEBUG] Reading user settings from > >> > > /home/abc/.m2/settings.xml > >> > > > >> > > > > > [DEBUG] Using local repository at > >> /home/abc/.m2/repository > >> > > > >> > > > > > > >> > > > >> > > > > > Make sure your settings file is in the right > location. > >> > > > >> > > > > > > >> > > > >> > > > > > On Mon, Nov 3, 2014 at 11:51 AM, Sweta Rani < > >> > > > >> > swetarani3...@gmail.com > >> > > > >> > > > > >> > > > >> > > > > > wrote: > >> > > > >> > > > > > > >> > > > >> > > > > > > I use campus proxy configuration for internet. But > I > >> am > >> > > > >> unable to > >> > > > >> > > run > >> > > > >> > > > > > make > >> > > > >> > > > > > > in installing Mesos on my Ubuntu -14.04, as it ends > >> up > >> > > with > >> > > > >> > > ERROR(1). > >> > > > >> > > > > > Upon > >> > > > >> > > > > > > searching, I created settings.xml file inside .m2 > >> with > >> > the > >> > > > >> > required > >> > > > >> > > > > > > configuration but failed again. Please help me out, > >> as > >> > it > >> > > is > >> > > > >> > > greatly > >> > > > >> > > > > > > hindering me from my work. > >> > > > >> > > > > > > > >> > > > >> > > > > > > On Sat Nov 01 2014 at 3:38:57 AM Joris Van > >> Remoortere < > >> > > > >> > > > > > jo...@mesosphere.io > >> > > > >> > > > > > > > > >> > > > >> > > > > > > wrote: > >> > > > >> > > > > > > > >> > > > >> > > > > > > > I think this suggests you're fetching through a > >> proxy: > >> > > > >> > > > > > > > *Proxy request sent, awaiting response... 200 OK* > >> > > > >> > > > > > > > > >> > > > >> > > > > > > > When I wget this is my output: > >> > > > >> > > > > > > > wget > >> > > > >> > http://repo.maven.apache.org/maven2/org/apache/apache/11/ > >> > > > >> > > > > > > > apache-11.pom > >> > > > >> > > > > > > > --2014-10-31 > >> > > > >> > > > > > > > < > >> > > > >> > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > >> > > > >> > > > > >> > > > >> > > > >> > > > >> > > >> > > > >> > >> > > > http://repo.maven.apache.org/maven2/org/apache/apache/11/ > >> > > apache-11.pom--2014-10-31 > >> > > > >> > > > > > > > > >> > > > >> > > > > > > > 15:05:32-- > >> > > > >> > > > > > > > > >> > > > >> > > > > > >> > > > >> > > >> > > > http://repo.maven.apache.org/maven2/org/apache/apache/11/apa > >> che-11.pom > >> > > > >> > > > > > > > Resolving repo.maven.apache.org ( > >> > repo.maven.apache.org > >> > > > )... > >> > > > >> > > > > > 23.235.47.215 > >> > > > >> > > > > > > > Connecting to repo.maven.apache.org > >> > > > >> > > > > > > > (repo.maven.apache.org)|23.235.47.215|:80... > >> > > > >> > > > > > > > connected. > >> > > > >> > > > > > > > *HTTP request sent, awaiting response... 200 OK* > >> > > > >> > > > > > > > > >> > > > >> > > > > > > > I think you might need to set up your proxy along > >> > these > >> > > > >> lines: > >> > > > >> > > > > > > > > >> > http://maven.apache.org/guides/mini/guide-proxies.html > >> > > > ... > >> > > > >> > but I > >> > > > >> > > > am > >> > > > >> > > > > > not > >> > > > >> > > > > > > > familiar with Maven. > >> > > > >> > > > > > > > > >> > > > >> > > > > > > > Joris > >> > > > >> > > > > > > > > >> > > > >> > > > > > > > > >> > > > >> > > > > > > > On Fri, Oct 31, 2014 at 2:36 PM, Sweta Rani < > >> > > > >> > > > swetarani3...@gmail.com > >> > > > >> > > > > > > >> > > > >> > > > > > > > wrote: > >> > > > >> > > > > > > > > >> > > > >> > > > > > > > > Tried wget for all the given https, it was > >> > successful > >> > > > but > >> > > > >> > still > >> > > > >> > > > > after > >> > > > >> > > > > > > > that > >> > > > >> > > > > > > > > make was not successful and make check says > "YOU > >> > HAVE > >> > > 3 > >> > > > >> > > DISABLED > >> > > > >> > > > > > TESTS" > >> > > > >> > > > > > > > > > >> > > > >> > > > > > > > > proxima@Centauri:~/mesos/build$ wget > >> > > > >> > > > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > >> > > > >> http://repo.maven.apache.org/maven2/org/apache/apache/11/ > >> > > apache-11.pom > >> > > > >> > > > > > > > > --2014-11-01 02:55:51-- > >> > > > >> > > > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > >> > > > >> http://repo.maven.apache.org/maven2/org/apache/apache/11/ > >> > > apache-11.pom > >> > > > >> > > > > > > > > Connecting to 10.3.100.207:8080... connected. > >> > > > >> > > > > > > > > Proxy request sent, awaiting response... 200 OK > >> > > > >> > > > > > > > > Length: 14811 (14K) [text/xml] > >> > > > >> > > > > > > > > Saving to: ‘apache-11.pom’ > >> > > > >> > > > > > > > > > >> > > > >> > > > > > > > > >> *Joris Van Remoortere* > >> > > > >> > > > > > > > > > >> > > > >> > > > > > > > > On Sat Nov 01 2014 at 2:36:27 AM Joris Van > >> > Remoortere > >> > > < > >> > > > >> > > > > > > > jo...@mesosphere.io > >> > > > >> > > > > > > > > > > >> > > > >> > > > > > > > > wrote: > >> > > > >> > > > > > > > > > >> > > > >> > > > > > > > > > That seems like you might have a > connectivity / > >> > > > firewall > >> > > > >> > > issue. > >> > > > >> > > > > > > > > > Can you try just doing a wget on that > artifact? > >> > > > >> > > > > > > > > > > >> > > > >> > > > > > > > > > On Fri, Oct 31, 2014 at 1:56 PM, Sweta Rani < > >> > > > >> > > > > > swetarani3...@gmail.com > >> > > > >> > > > > > > > > >> > > > >> > > > > > > > > > wrote: > >> > > > >> > > > > > > > > > > >> > > > >> > > > > > > > > > > I tried it again but failed with following > >> > errors > >> > > : > >> > > > >> > > > > > > > > > > > >> > > > >> > > > > > > > > > > make[1]: Entering directory > >> > > > >> > `/home/proxima/mesos/build/src' > >> > > > >> > > > > > > > > > > Building mesos-0.21.0.jar ... > >> > > > >> > > > > > > > > > > [INFO] Scanning for projects... > >> > > > >> > > > > > > > > > > Downloading: > >> > > > >> > > > > > > > > > > > >> > > > >> > http://repo.maven.apache.org/maven2/org/apache/apache/11/ > >> > > > >> > > > > > > > apache-11.pom > >> > > > >> > > > > > > > > > > [ERROR] The build could not read 1 project > -> > >> > > [Help > >> > > > 1] > >> > > > >> > > > > > > > > > > [ERROR] > >> > > > >> > > > > > > > > > > [ERROR] The project > >> > > org.apache.mesos:mesos:0.21.0 > >> > > > >> > > > > > > > > > > (/home/proxima/mesos/build/src > >> /java/mesos.pom) > >> > > has 1 > >> > > > >> > error > >> > > > >> > > > > > > > > > > [ERROR] Non-resolvable parent POM: > Could > >> not > >> > > > >> transfer > >> > > > >> > > > > > artifact > >> > > > >> > > > > > > > > > > org.apache:apache:pom:11 from/to central ( > >> > > > >> > > > > > > > > > > http://repo.maven.apache.org/maven2): > >> > Connection > >> > > to > >> > > > >> > > > > > > > > > > http://repo.maven.apache.org refused and > >> > > > >> > > > 'parent.relativePath' > >> > > > >> > > > > > > > points > >> > > > >> > > > > > > > > at > >> > > > >> > > > > > > > > > > wrong local POM @ line 18, column 11: > >> Connection > >> > > > >> refused > >> > > > >> > -> > >> > > > >> > > > > [Help > >> > > > >> > > > > > > 2] > >> > > > >> > > > > > > > > > > [ERROR] > >> > > > >> > > > > > > > > > > [ERROR] To see the full stack trace of the > >> > errors, > >> > > > >> re-run > >> > > > >> > > > Maven > >> > > > >> > > > > > > with > >> > > > >> > > > > > > > > the > >> > > > >> > > > > > > > > > -e > >> > > > >> > > > > > > > > > > switch. > >> > > > >> > > > > > > > > > > [ERROR] Re-run Maven using the -X switch to > >> > enable > >> > > > >> full > >> > > > >> > > debug > >> > > > >> > > > > > > > logging. > >> > > > >> > > > > > > > > > > [ERROR] > >> > > > >> > > > > > > > > > > [ERROR] For more information about the > errors > >> > and > >> > > > >> > possible > >> > > > >> > > > > > > solutions, > >> > > > >> > > > > > > > > > > please read the following articles: > >> > > > >> > > > > > > > > > > [ERROR] [Help 1] > >> > > > >> > > > > > > > > > > > >> > > > >> > > > http://cwiki.apache.org/confluence/display/MAVEN/ProjectBuil > >> > > > >> > > > > > > > > > dingException > >> > > > >> > > > > > > > > > > [ERROR] [Help 2] > >> > > > >> > > > > > > > > > > > >> > > > >> > > > http://cwiki.apache.org/confluence/display/MAVEN/Unresolvabl > >> > > > >> > > > > > > > > > eModelException > >> > > > >> > > > > > > > > > > make[1]: *** [java/target/mesos-0.21.0.jar] > >> > Error > >> > > 1 > >> > > > >> > > > > > > > > > > make[1]: Leaving directory > >> > > > >> > `/home/proxima/mesos/build/src' > >> > > > >> > > > > > > > > > > make: *** [all-recursive] Error 1 > >> > > > >> > > > > > > > > > > > >> > > > >> > > > > > > > > > > > >> > > > >> > > > > > > > > > > On Fri Oct 31 2014 at 1:09:15 PM Sweta > Rani < > >> > > > >> > > > > > > swetarani3...@gmail.com > >> > > > >> > > > > > > > > > >> > > > >> > > > > > > > > > > wrote: > >> > > > >> > > > > > > > > > > > >> > > > >> > > > > > > > > > > > yaa.. followed the steps as directed in > >> the > >> > > > >> > > documentation > >> > > > >> > > > > > > > > > > > > >> > > > >> > > > > > > > > > > > *Sweta Rani* > >> > > > >> > > > > > > > > > > > *3rd Year Undergraduate* > >> > > > >> > > > > > > > > > > > *Department of Electrical Engineering* > >> > > > >> > > > > > > > > > > > *IIT Kharagpur <http://www.iitkgp.ac.in/ > >* > >> > > > >> > > > > > > > > > > > > >> > > > >> > > > > > > > > > > > On Fri, Oct 31, 2014 at 3:14 AM, Dominic > >> > Hamon < > >> > > > >> > > > > > > > > > dha...@twopensource.com> > >> > > > >> > > > > > > > > > > > wrote: > >> > > > >> > > > > > > > > > > > > >> > > > >> > > > > > > > > > > >> Let's tackle the easy stuff: did you run > >> > > > bootstrap > >> > > > >> and > >> > > > >> > > > > > configure > >> > > > >> > > > > > > > as > >> > > > >> > > > > > > > > > per > >> > > > >> > > > > > > > > > > >> the > >> > > > >> > > > > > > > > > > >> getting started doc? > >> > > > >> > > > > > > > > > > >> On Oct 30, 2014 2:04 PM, "Sweta Rani" < > >> > > > >> > > > > > swetarani3...@gmail.com> > >> > > > >> > > > > > > > > > wrote: > >> > > > >> > > > > > > > > > > >> > >> > > > >> > > > > > > > > > > >> > Tried all the suggestions and tips > >> given in > >> > > > JIRA > >> > > > >> and > >> > > > >> > > > > > different > >> > > > >> > > > > > > > > > google > >> > > > >> > > > > > > > > > > >> > forums but still the error remains > same. > >> > > > >> > > > > > > > > > > >> > > >> > > > >> > > > > > > > > > > >> > Making all in . > >> > > > >> > > > > > > > > > > >> > make[1]: Entering directory > >> > > > >> > > `/home/proxima/mesos/build' > >> > > > >> > > > > > > > > > > >> > make[1]: Nothing to be done for > >> `all-am'. > >> > > > >> > > > > > > > > > > >> > make[1]: Leaving directory > >> > > > >> > `/home/proxima/mesos/build' > >> > > > >> > > > > > > > > > > >> > Making all in 3rdparty > >> > > > >> > > > > > > > > > > >> > make[1]: Entering directory > >> > > > >> > > `/home/proxima/mesos/build/ > >> > > > >> > > > > > > > 3rdparty' > >> > > > >> > > > > > > > > > > >> > make all-recursive > >> > > > >> > > > > > > > > > > >> > make[2]: Entering directory > >> > > > >> > > `/home/proxima/mesos/build/ > >> > > > >> > > > > > > > 3rdparty' > >> > > > >> > > > > > > > > > > >> > Making all in libprocess > >> > > > >> > > > > > > > > > > >> > make[3]: Entering directory > >> > > > >> > > > > > > > > > > >> `/home/proxima/mesos/build/ > >> > > 3rdparty/libprocess' > >> > > > >> > > > > > > > > > > >> > Making all in 3rdparty > >> > > > >> > > > > > > > > > > >> > make[4]: Entering directory > >> > > > >> > > > > > > > > > > >> > > >> > > > >> > > `/home/proxima/mesos/build/3rdparty/libprocess/3rdparty' > >> > > > >> > > > > > > > > > > >> > make all-recursive > >> > > > >> > > > > > > > > > > >> > make[5]: Entering directory > >> > > > >> > > > > > > > > > > >> > > >> > > > >> > > `/home/proxima/mesos/build/3rdparty/libprocess/3rdparty' > >> > > > >> > > > > > > > > > > >> > Making all in stout > >> > > > >> > > > > > > > > > > >> > make[6]: Entering directory > >> > > > >> > > > > > > > > > > >> > > >> > > > >> > > > > > `/home/proxima/mesos/build/3rd > >> party/libprocess/3rdparty/ > >> > > stout' > >> > > > >> > > > > > > > > > > >> > Making all in . > >> > > > >> > > > > > > > > > > >> > make[7]: Entering directory > >> > > > >> > > > > > > > > > > >> > > >> > > > >> > > > > > `/home/proxima/mesos/build/3rd > >> party/libprocess/3rdparty/ > >> > > stout' > >> > > > >> > > > > > > > > > > >> > make[7]: Nothing to be done for > >> `all-am'. > >> > > > >> > > > > > > > > > > >> > make[7]: Leaving directory > >> > > > >> > > > > > > > > > > >> > > >> > > > >> > > > > > `/home/proxima/mesos/build/3rd > >> party/libprocess/3rdparty/ > >> > > stout' > >> > > > >> > > > > > > > > > > >> > Making all in include > >> > > > >> > > > > > > > > > > >> > make[7]: Entering directory > >> > > > >> > > > > > > > > > > >> > > >> > > > >> > > > > > `/home/proxima/mesos/build/3rdparty/libprocess/3rdparty/ > >> stou > >> > > > >> > > > > > > > > > t/include' > >> > > > >> > > > > > > > > > > >> > make[7]: Nothing to be done for `all'. > >> > > > >> > > > > > > > > > > >> > make[7]: Leaving directory > >> > > > >> > > > > > > > > > > >> > > >> > > > >> > > > > > `/home/proxima/mesos/build/3rdparty/libprocess/3rdparty/ > >> stou > >> > > > >> > > > > > > > > > t/include' > >> > > > >> > > > > > > > > > > >> > make[6]: Leaving directory > >> > > > >> > > > > > > > > > > >> > > >> > > > >> > > > > > `/home/proxima/mesos/build/3rd > >> party/libprocess/3rdparty/ > >> > > stout' > >> > > > >> > > > > > > > > > > >> > make[6]: Entering directory > >> > > > >> > > > > > > > > > > >> > > >> > > > >> > > `/home/proxima/mesos/build/3rdparty/libprocess/3rdparty' > >> > > > >> > > > > > > > > > > >> > make[6]: Nothing to be done for > >> `all-am'. > >> > > > >> > > > > > > > > > > >> > make[6]: Leaving directory > >> > > > >> > > > > > > > > > > >> > > >> > > > >> > > `/home/proxima/mesos/build/3rdparty/libprocess/3rdparty' > >> > > > >> > > > > > > > > > > >> > make[5]: Leaving directory > >> > > > >> > > > > > > > > > > >> > > >> > > > >> > > `/home/proxima/mesos/build/3rdparty/libprocess/3rdparty' > >> > > > >> > > > > > > > > > > >> > make[4]: Leaving directory > >> > > > >> > > > > > > > > > > >> > > >> > > > >> > > `/home/proxima/mesos/build/3rdparty/libprocess/3rdparty' > >> > > > >> > > > > > > > > > > >> > Making all in . > >> > > > >> > > > > > > > > > > >> > make[4]: Entering directory > >> > > > >> > > > > > > > > > > >> `/home/proxima/mesos/build/ > >> > > 3rdparty/libprocess' > >> > > > >> > > > > > > > > > > >> > make[4]: Nothing to be done for > >> `all-am'. > >> > > > >> > > > > > > > > > > >> > make[4]: Leaving directory > >> > > > >> > > > > > > > > > > >> `/home/proxima/mesos/build/ > >> > > 3rdparty/libprocess' > >> > > > >> > > > > > > > > > > >> > Making all in include > >> > > > >> > > > > > > > > > > >> > make[4]: Entering directory > >> > > > >> > > > > > > > > > > >> > > >> > > > >> > > `/home/proxima/mesos/build/3rdparty/libprocess/include' > >> > > > >> > > > > > > > > > > >> > make[4]: Nothing to be done for `all'. > >> > > > >> > > > > > > > > > > >> > make[4]: Leaving directory > >> > > > >> > > > > > > > > > > >> > > >> > > > >> > > `/home/proxima/mesos/build/3rdparty/libprocess/include' > >> > > > >> > > > > > > > > > > >> > make[3]: Leaving directory > >> > > > >> > > > > > > > > > > >> `/home/proxima/mesos/build/ > >> > > 3rdparty/libprocess' > >> > > > >> > > > > > > > > > > >> > make[3]: Entering directory > >> > > > >> > > `/home/proxima/mesos/build/ > >> > > > >> > > > > > > > 3rdparty' > >> > > > >> > > > > > > > > > > >> > make[3]: Nothing to be done for > >> `all-am'. > >> > > > >> > > > > > > > > > > >> > make[3]: Leaving directory > >> > > > >> > > > > > > `/home/proxima/mesos/build/3rdparty' > >> > > > >> > > > > > > > > > > >> > make[2]: Leaving directory > >> > > > >> > > > > > > `/home/proxima/mesos/build/3rdparty' > >> > > > >> > > > > > > > > > > >> > make[1]: Leaving directory > >> > > > >> > > > > > > `/home/proxima/mesos/build/3rdparty' > >> > > > >> > > > > > > > > > > >> > Making all in src > >> > > > >> > > > > > > > > > > >> > make[1]: Entering directory > >> > > > >> > > > > `/home/proxima/mesos/build/src' > >> > > > >> > > > > > > > > > > >> > make[1]: *** No rule to make target > >> `all'. > >> > > > Stop. > >> > > > >> > > > > > > > > > > >> > make[1]: Leaving directory > >> > > > >> > > > `/home/proxima/mesos/build/src' > >> > > > >> > > > > > > > > > > >> > make: *** [all-recursive] Error 1 > >> > > > >> > > > > > > > > > > >> > > >> > > > >> > > > > > > > > > > >> > *Sweta Rani* > >> > > > >> > > > > > > > > > > >> > > >> > > > >> > > > > > > > > > > >> > >> > > > >> > > > > > > > > > > > > >> > > > >> > > > > > > > > > > > > >> > > > >> > > > > > > > > > > > >> > > > >> > > > > > > > > > > >> > > > >> > > > > > > > > > >> > > > >> > > > > > > > > >> > > > >> > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > >> > > > >> > > > > >> > > > >> > > > >> > > > >> > > >> > > > >> > >> > > > > > >> > > > > > >> > > > > >> > > > >> > > >> > > >