K. I will wait till the https://reviews.apache.org/r/27724/ is commited. Then try again.
Thanks, Sweta On Fri Nov 07 2014 at 6:10:34 PM Alex Rukletsov <a...@mesosphere.io> wrote: > Got it. I was wrong (thanks Till for correcting me on IRC!), you do need > the SVN repo. At this point, I'll let the others chime in. > > Best, > Alex > > On Fri, Nov 7, 2014 at 11:59 AM, Sweta Rani <swetarani3...@gmail.com> > wrote: > > > Alex, > > I am referring to http://mesos.apache.org/assets/css/main.css. > > On Fri Nov 07 2014 at 4:11:10 PM Sweta Rani <swetarani3...@gmail.com> > > wrote: > > > > > Alex, > > > I had followed those instruction and for that I cloned git repository > but > > > I don't have the asset folder in it where I need to make changes. So, > how > > > shall I proceed then. > > > On Fri Nov 07 2014 at 4:07:58 PM Alex Rukletsov <a...@mesosphere.io> > > > wrote: > > > > > >> You're welcome! If you would like to contribute to Mesos (what is > highly > > >> encouraged!) please check this guide > > >> <https://mesos.apache.org/documentation/latest/mesos- > developers-guide/ > > >. > > >> AFAIK, you don't need to clone any svn repos for this : ). > > >> > > >> On Fri, Nov 7, 2014 at 11:29 AM, Sweta Rani <swetarani3...@gmail.com> > > >> wrote: > > >> > > >> > But next I was trying to clone svn repo as I need to make changes in > > >> > main.css so I would need help in that > > >> > > > >> > > > >> > On Fri Nov 07 2014 at 3:57:52 PM Sweta Rani < > swetarani3...@gmail.com> > > >> > wrote: > > >> > > > >> > > Yes I have done that. Now master and slave both are working. > Thanks > > >> for > > >> > > help :) > > >> > > > > >> > > > > >> > > On Fri Nov 07 2014 at 3:55:29 PM Alex Rukletsov < > a...@mesosphere.io > > > > > >> > > wrote: > > >> > > > > >> > >> Hi Sweta, > > >> > >> > > >> > >> I'm a bit confused about what works for you and what doesn't. Are > > you > > >> > now > > >> > >> able to start mesos-master and mesos-slave and launch an example > > >> > >> framework? > > >> > >> > > >> > >> On Thu, Nov 6, 2014 at 9:16 PM, Sweta Rani < > > swetarani3...@gmail.com> > > >> > >> wrote: > > >> > >> > > >> > >> > Cloning from svn repo gave following error: > > >> > >> > > > >> > >> > proxima@proxima-HP-Pavilion-m6-Notebook-PC:~/mesodoc$ rake > > >> > >> > Cloning Apache Mesos codebase > > >> > >> > Cloning into '/home/proxima/mesodoc/tmp/mesos'... > > >> > >> > remote: Counting objects: 1075, done. > > >> > >> > remote: Compressing objects: 100% (935/935), done. > > >> > >> > remote: Total 1075 (delta 221), reused 537 (delta 83) > > >> > >> > Receiving objects: 100% (1075/1075), 26.77 MiB | 171.00 KiB/s, > > >> done. > > >> > >> > Resolving deltas: 100% (221/221), done. > > >> > >> > Checking connectivity... done. > > >> > >> > Updating latest documentation from the Apache Mesos codebase > > >> > >> > Updating docs to the latest version > > >> > >> > rake aborted! > > >> > >> > Errno::ENOENT: No such file or directory - > > >> > >> > /home/proxima/mesodoc/source/documentation/latest/ > > >> > >> > running-torque-or-mpi-on-mesos.md > > >> > >> > /home/proxima/mesodoc/Rakefile:43:in `block in <top > (required)>' > > >> > >> > Tasks: TOP => default => update_docs > > >> > >> > > > >> > >> > Neither I could get assets folder in this. How will I make > > changes? > > >> > >> > > > >> > >> > On Thu Nov 06 2014 at 10:55:38 PM Joris Van Remoortere < > > >> > >> > jo...@mesosphere.io> > > >> > >> > wrote: > > >> > >> > > > >> > >> > > If you run: mesos-slave.sh --help > > >> > >> > > Then you will see all the options you can pass to the slave. > > One > > >> of > > >> > >> them > > >> > >> > > is --port=VALUE > > >> > >> > > > > >> > >> > > Joris > > >> > >> > > > > >> > >> > > On Thu, Nov 6, 2014 at 6:39 AM, Sweta Rani < > > >> swetarani3...@gmail.com > > >> > > > > >> > >> > > wrote: > > >> > >> > > > > >> > >> > > > How can I change port for mesos-slave from default 5051 to > > >> 5052? > > >> > >> > > > > > >> > >> > > > *Sweta Rani* > > >> > >> > > > > > >> > >> > > > On Thu, Nov 6, 2014 at 7:58 PM, Sweta Rani < > > >> > swetarani3...@gmail.com > > >> > >> > > > >> > >> > > > wrote: > > >> > >> > > > > > >> > >> > > > > Alex, > > >> > >> > > > > > > >> > >> > > > > Done with master but unable to run slave using command > > >> > >> > > > "./bin/mesos-slave.sh > > >> > >> > > > > --master=127.0.0.1:5050" > > >> > >> > > > > Also the port 5051 is allocated with random work '-'. See > > >> this: > > >> > >> > > > > proxima@proxima:~/mesos/build$ netstat -ltnp | grep > > ':5051' > > >> > >> > > > > (Not all processes could be identified, non-owned process > > >> info > > >> > >> > > > > will not be shown, you would have to be root to see it > > all.) > > >> > >> > > > > tcp 0 0 0.0.0.0:5051 0.0.0.0:* > > >> > >> > > > > LISTEN - > > >> > >> > > > > proxima@proxima:~/mesos/build$ sudo kill -9 - > > >> > >> > > > > kill: failed to parse argument: '-' > > >> > >> > > > > proxima@proxima:~/mesos/build$ netstat -ltnp | grep > > ':5051' > > >> > >> > > > > (Not all processes could be identified, non-owned process > > >> info > > >> > >> > > > > will not be shown, you would have to be root to see it > > all.) > > >> > >> > > > > tcp 0 0 0.0.0.0:5051 0.0.0.0:* > > >> > >> > > > > LISTEN - > > >> > >> > > > > proxima@:~/mesos/build$ ./bin/mesos-slave.sh --master= > > >> > >> 127.0.0.1:5050 > > >> > >> > > > > WARNING: Logging before InitGoogleLogging() is written to > > >> STDERR > > >> > >> > > > > F1106 19:51:22.737992 6367 process.cpp:1532] Failed to > > >> > initialize, > > >> > >> > bind > > >> > >> > > > > 0.0.0.0:5051: Address already in use [98] > > >> > >> > > > > *** Check failure stack trace: *** > > >> > >> > > > > Aborted (core dumped) > > >> > >> > > > > > > >> > >> > > > > > > >> > >> > > > > *Sweta Rani* > > >> > >> > > > > > > >> > >> > > > > On Thu, Nov 6, 2014 at 7:07 PM, Alex Rukletsov < > > >> > >> a...@mesosphere.io> > > >> > >> > > > wrote: > > >> > >> > > > > > > >> > >> > > > >> Sweta, > > >> > >> > > > >> > > >> > >> > > > >> have you tried another port? > > >> > >> > > > >> > > >> > >> > > > >> On Thu, Nov 6, 2014 at 2:24 PM, Sweta Rani < > > >> > >> swetarani3...@gmail.com > > >> > >> > > > > >> > >> > > > >> wrote: > > >> > >> > > > >> > > >> > >> > > > >> > Joris > > >> > >> > > > >> > > > >> > >> > > > >> > Done with above commands, but now it gives following > > >> error: > > >> > >> > > > >> > WARNING: Logging before InitGoogleLogging() is written > > to > > >> > >> STDERR > > >> > >> > > > >> > F1106 18:50:48.117947 9706 process.cpp:1532] Failed > to > > >> > >> > initialize, > > >> > >> > > > bind > > >> > >> > > > >> > 127.0.0.1:5050: Address already in use [98] > > >> > >> > > > >> > *** Check failure stack trace: *** > > >> > >> > > > >> > > > >> > >> > > > >> > I tried to solve it by > > >> > >> > > > >> > > > >> > >> > > > >> > > > >> > >> > > > >> > > >> > >> > > > http://stackoverflow.com/questions/10745878/ubuntu- > > >> > >> > > error-with-apache-98address-already-in-use > > >> > >> > > > >> > but it didnt work for me. > > >> > >> > > > >> > > > >> > >> > > > >> > > > >> > >> > > > >> > *Sweta Rani* > > >> > >> > > > >> > > > >> > >> > > > >> > On Wed, Nov 5, 2014 at 3:50 AM, Joris Van Remoortere < > > >> > >> > > > >> jo...@mesosphere.io> > > >> > >> > > > >> > wrote: > > >> > >> > > > >> > > > >> > >> > > > >> > > You need to make the directory and set the > permissions > > >> to > > >> > the > > >> > >> > user > > >> > >> > > > you > > >> > >> > > > >> > are > > >> > >> > > > >> > > running the master as. > > >> > >> > > > >> > > > > >> > >> > > > >> > > For example: > > >> > >> > > > >> > > > > >> > >> > > > >> > > sudo mkdir /var/lib/mesos > > >> > >> > > > >> > > sudo chown jmlvanre /var/lib/mesos > > >> > >> > > > >> > > > > >> > >> > > > >> > > [jmlvanre] <run mesos master...> > > >> > >> > > > >> > > > > >> > >> > > > >> > > On Tue, Nov 4, 2014 at 2:07 PM, Sweta Rani < > > >> > >> > > swetarani3...@gmail.com > > >> > >> > > > > > > >> > >> > > > >> > > wrote: > > >> > >> > > > >> > > > > >> > >> > > > >> > > > Thanks for your help. I have installed mesos but > > >> unable > > >> > to > > >> > >> > > start > > >> > >> > > > >> mesos > > >> > >> > > > >> > > > master by the command > > >> > >> > > > >> > > > "./bin/mesos-master.sh --ip=127.0.0.1 > > >> > >> > > --work_dir=/var/lib/mesos". > > >> > >> > > > >> > > > > > >> > >> > > > >> > > > The file exists as "mesos-master.sh.in" in the > bin > > >> > folder. > > >> > >> > > > >> > > > > > >> > >> > > > >> > > > It reports: > > >> > >> > > > >> > > > Failed to create work directory '/var/lib/mesos': > > >> > >> Permission > > >> > >> > > > denied > > >> > >> > > > >> > > > > > >> > >> > > > >> > > > *Sweta Rani* > > >> > >> > > > >> > > > > > >> > >> > > > >> > > > On Tue, Nov 4, 2014 at 2:50 PM, Adam Bordelon < > > >> > >> > > a...@mesosphere.io > > >> > >> > > > > > > >> > >> > > > >> > > wrote: > > >> > >> > > > >> > > > > > >> > >> > > > >> > > > > As an alternate workaround, if you don't need > the > > >> Java > > >> > >> > support > > >> > >> > > > >> > (you're > > >> > >> > > > >> > > > not > > >> > >> > > > >> > > > > running a JVM framework like > > Spark/Hadoop/Marathon), > > >> > then > > >> > >> > you > > >> > >> > > > >> could > > >> > >> > > > >> > use > > >> > >> > > > >> > > > > `configure --disable-java` to skip all the > > maven/pom > > >> > >> build > > >> > >> > > > steps. > > >> > >> > > > >> > > > > > > >> > >> > > > >> > > > > By disabling Java, you could at least check that > > the > > >> > >> rest of > > >> > >> > > > Mesos > > >> > >> > > > >> > > builds > > >> > >> > > > >> > > > > and runs fine, which would still work with C++, > > >> Python, > > >> > >> or > > >> > >> > Go > > >> > >> > > > >> > > frameworks, > > >> > >> > > > >> > > > > or even any Java frameworks using the pure Java > > >> > bindings > > >> > >> > > > (jesos). > > >> > >> > > > >> > > > > > > >> > >> > > > >> > > > > On Mon, Nov 3, 2014 at 2:01 PM, Joris Van > > >> Remoortere < > > >> > >> > > > >> > > > jo...@mesosphere.io> > > >> > >> > > > >> > > > > wrote: > > >> > >> > > > >> > > > > > > >> > >> > > > >> > > > > > Did you verify that the settings.xml file was > > >> parsed > > >> > >> using > > >> > >> > > mvn > > >> > >> > > > >> -X? > > >> > >> > > > >> > > > > > > > >> > >> > > > >> > > > > > Specifically after the first few lines you > will > > >> see > > >> > >> > > something > > >> > >> > > > >> along > > >> > >> > > > >> > > the > > >> > >> > > > >> > > > > > lines of: > > >> > >> > > > >> > > > > > [DEBUG] Reading global settings from > > >> > >> > > > >> > > /usr/share/maven/conf/settings.xml > > >> > >> > > > >> > > > > > [DEBUG] Reading user settings from > > >> > >> > > /home/abc/.m2/settings.xml > > >> > >> > > > >> > > > > > [DEBUG] Using local repository at > > >> > >> /home/abc/.m2/repository > > >> > >> > > > >> > > > > > > > >> > >> > > > >> > > > > > Make sure your settings file is in the right > > >> > location. > > >> > >> > > > >> > > > > > > > >> > >> > > > >> > > > > > On Mon, Nov 3, 2014 at 11:51 AM, Sweta Rani < > > >> > >> > > > >> > swetarani3...@gmail.com > > >> > >> > > > >> > > > > > >> > >> > > > >> > > > > > wrote: > > >> > >> > > > >> > > > > > > > >> > >> > > > >> > > > > > > I use campus proxy configuration for > internet. > > >> But > > >> > I > > >> > >> am > > >> > >> > > > >> unable to > > >> > >> > > > >> > > run > > >> > >> > > > >> > > > > > make > > >> > >> > > > >> > > > > > > in installing Mesos on my Ubuntu -14.04, as > it > > >> ends > > >> > >> up > > >> > >> > > with > > >> > >> > > > >> > > ERROR(1). > > >> > >> > > > >> > > > > > Upon > > >> > >> > > > >> > > > > > > searching, I created settings.xml file > inside > > >> .m2 > > >> > >> with > > >> > >> > the > > >> > >> > > > >> > required > > >> > >> > > > >> > > > > > > configuration but failed again. Please help > me > > >> out, > > >> > >> as > > >> > >> > it > > >> > >> > > is > > >> > >> > > > >> > > greatly > > >> > >> > > > >> > > > > > > hindering me from my work. > > >> > >> > > > >> > > > > > > > > >> > >> > > > >> > > > > > > On Sat Nov 01 2014 at 3:38:57 AM Joris Van > > >> > >> Remoortere < > > >> > >> > > > >> > > > > > jo...@mesosphere.io > > >> > >> > > > >> > > > > > > > > > >> > >> > > > >> > > > > > > wrote: > > >> > >> > > > >> > > > > > > > > >> > >> > > > >> > > > > > > > I think this suggests you're fetching > > through > > >> a > > >> > >> proxy: > > >> > >> > > > >> > > > > > > > *Proxy request sent, awaiting response... > > 200 > > >> OK* > > >> > >> > > > >> > > > > > > > > > >> > >> > > > >> > > > > > > > When I wget this is my output: > > >> > >> > > > >> > > > > > > > wget > > >> > >> > > > >> > > > http://repo.maven.apache.org/maven2/org/apache/apache/11/ > > >> > >> > > > >> > > > > > > > apache-11.pom > > >> > >> > > > >> > > > > > > > --2014-10-31 > > >> > >> > > > >> > > > > > > > < > > >> > >> > > > >> > > > > > > > > >> > >> > > > >> > > > > > > > >> > >> > > > >> > > > > > > >> > >> > > > >> > > > > > >> > >> > > > >> > > > > >> > >> > > > >> > > > >> > >> > > > >> > > >> > >> > > > http://repo.maven.apache.org/maven2/org/apache/apache/11/ > > >> > >> > > apache-11.pom--2014-10-31 > > >> > >> > > > >> > > > > > > > > > >> > >> > > > >> > > > > > > > 15:05:32-- > > >> > >> > > > >> > > > > > > > > > >> > >> > > > >> > > > > > > >> > >> > > > >> > > > >> > >> > > > http://repo.maven.apache.org/maven2/org/apache/apache/11/ > apa > > >> > >> che-11.pom > > >> > >> > > > >> > > > > > > > Resolving repo.maven.apache.org ( > > >> > >> > repo.maven.apache.org > > >> > >> > > > )... > > >> > >> > > > >> > > > > > 23.235.47.215 > > >> > >> > > > >> > > > > > > > Connecting to repo.maven.apache.org > > >> > >> > > > >> > > > > > > > (repo.maven.apache.org > > )|23.235.47.215|:80... > > >> > >> > > > >> > > > > > > > connected. > > >> > >> > > > >> > > > > > > > *HTTP request sent, awaiting response... > 200 > > >> OK* > > >> > >> > > > >> > > > > > > > > > >> > >> > > > >> > > > > > > > I think you might need to set up your > proxy > > >> along > > >> > >> > these > > >> > >> > > > >> lines: > > >> > >> > > > >> > > > > > > > > > >> > >> > http://maven.apache.org/guides/mini/guide-proxies.html > > >> > >> > > > ... > > >> > >> > > > >> > but I > > >> > >> > > > >> > > > am > > >> > >> > > > >> > > > > > not > > >> > >> > > > >> > > > > > > > familiar with Maven. > > >> > >> > > > >> > > > > > > > > > >> > >> > > > >> > > > > > > > Joris > > >> > >> > > > >> > > > > > > > > > >> > >> > > > >> > > > > > > > > > >> > >> > > > >> > > > > > > > On Fri, Oct 31, 2014 at 2:36 PM, Sweta > Rani > > < > > >> > >> > > > >> > > > swetarani3...@gmail.com > > >> > >> > > > >> > > > > > > > >> > >> > > > >> > > > > > > > wrote: > > >> > >> > > > >> > > > > > > > > > >> > >> > > > >> > > > > > > > > Tried wget for all the given https, it > was > > >> > >> > successful > > >> > >> > > > but > > >> > >> > > > >> > still > > >> > >> > > > >> > > > > after > > >> > >> > > > >> > > > > > > > that > > >> > >> > > > >> > > > > > > > > make was not successful and make check > > says > > >> > "YOU > > >> > >> > HAVE > > >> > >> > > 3 > > >> > >> > > > >> > > DISABLED > > >> > >> > > > >> > > > > > TESTS" > > >> > >> > > > >> > > > > > > > > > > >> > >> > > > >> > > > > > > > > proxima@Centauri:~/mesos/build$ wget > > >> > >> > > > >> > > > > > > > > > > >> > >> > > > >> > > > > > > > >> > >> > > > >> > > > > >> > >> > > > >> http://repo.maven.apache.org/ > maven2/org/apache/apache/11/ > > >> > >> > > apache-11.pom > > >> > >> > > > >> > > > > > > > > --2014-11-01 02:55:51-- > > >> > >> > > > >> > > > > > > > > > > >> > >> > > > >> > > > > > > > >> > >> > > > >> > > > > >> > >> > > > >> http://repo.maven.apache.org/ > maven2/org/apache/apache/11/ > > >> > >> > > apache-11.pom > > >> > >> > > > >> > > > > > > > > Connecting to 10.3.100.207:8080... > > >> connected. > > >> > >> > > > >> > > > > > > > > Proxy request sent, awaiting response... > > >> 200 OK > > >> > >> > > > >> > > > > > > > > Length: 14811 (14K) [text/xml] > > >> > >> > > > >> > > > > > > > > Saving to: ‘apache-11.pom’ > > >> > >> > > > >> > > > > > > > > > > >> > >> > > > >> > > > > > > > > >> *Joris Van Remoortere* > > >> > >> > > > >> > > > > > > > > > > >> > >> > > > >> > > > > > > > > On Sat Nov 01 2014 at 2:36:27 AM Joris > Van > > >> > >> > Remoortere > > >> > >> > > < > > >> > >> > > > >> > > > > > > > jo...@mesosphere.io > > >> > >> > > > >> > > > > > > > > > > > >> > >> > > > >> > > > > > > > > wrote: > > >> > >> > > > >> > > > > > > > > > > >> > >> > > > >> > > > > > > > > > That seems like you might have a > > >> > connectivity / > > >> > >> > > > firewall > > >> > >> > > > >> > > issue. > > >> > >> > > > >> > > > > > > > > > Can you try just doing a wget on that > > >> > artifact? > > >> > >> > > > >> > > > > > > > > > > > >> > >> > > > >> > > > > > > > > > On Fri, Oct 31, 2014 at 1:56 PM, Sweta > > >> Rani < > > >> > >> > > > >> > > > > > swetarani3...@gmail.com > > >> > >> > > > >> > > > > > > > > > >> > >> > > > >> > > > > > > > > > wrote: > > >> > >> > > > >> > > > > > > > > > > > >> > >> > > > >> > > > > > > > > > > I tried it again but failed with > > >> following > > >> > >> > errors > > >> > >> > > : > > >> > >> > > > >> > > > > > > > > > > > > >> > >> > > > >> > > > > > > > > > > make[1]: Entering directory > > >> > >> > > > >> > `/home/proxima/mesos/build/src' > > >> > >> > > > >> > > > > > > > > > > Building mesos-0.21.0.jar ... > > >> > >> > > > >> > > > > > > > > > > [INFO] Scanning for projects... > > >> > >> > > > >> > > > > > > > > > > Downloading: > > >> > >> > > > >> > > > > > > > > > > > > >> > >> > > > >> > > > http://repo.maven.apache.org/maven2/org/apache/apache/11/ > > >> > >> > > > >> > > > > > > > apache-11.pom > > >> > >> > > > >> > > > > > > > > > > [ERROR] The build could not read 1 > > >> project > > >> > -> > > >> > >> > > [Help > > >> > >> > > > 1] > > >> > >> > > > >> > > > > > > > > > > [ERROR] > > >> > >> > > > >> > > > > > > > > > > [ERROR] The project > > >> > >> > > org.apache.mesos:mesos:0.21.0 > > >> > >> > > > >> > > > > > > > > > > (/home/proxima/mesos/build/src > > >> > >> /java/mesos.pom) > > >> > >> > > has 1 > > >> > >> > > > >> > error > > >> > >> > > > >> > > > > > > > > > > [ERROR] Non-resolvable parent > POM: > > >> > Could > > >> > >> not > > >> > >> > > > >> transfer > > >> > >> > > > >> > > > > > artifact > > >> > >> > > > >> > > > > > > > > > > org.apache:apache:pom:11 from/to > > >> central ( > > >> > >> > > > >> > > > > > > > > > > http://repo.maven.apache.org/maven2 > ): > > >> > >> > Connection > > >> > >> > > to > > >> > >> > > > >> > > > > > > > > > > http://repo.maven.apache.org > refused > > >> and > > >> > >> > > > >> > > > 'parent.relativePath' > > >> > >> > > > >> > > > > > > > points > > >> > >> > > > >> > > > > > > > > at > > >> > >> > > > >> > > > > > > > > > > wrong local POM @ line 18, column > 11: > > >> > >> Connection > > >> > >> > > > >> refused > > >> > >> > > > >> > -> > > >> > >> > > > >> > > > > [Help > > >> > >> > > > >> > > > > > > 2] > > >> > >> > > > >> > > > > > > > > > > [ERROR] > > >> > >> > > > >> > > > > > > > > > > [ERROR] To see the full stack trace > of > > >> the > > >> > >> > errors, > > >> > >> > > > >> re-run > > >> > >> > > > >> > > > Maven > > >> > >> > > > >> > > > > > > with > > >> > >> > > > >> > > > > > > > > the > > >> > >> > > > >> > > > > > > > > > -e > > >> > >> > > > >> > > > > > > > > > > switch. > > >> > >> > > > >> > > > > > > > > > > [ERROR] Re-run Maven using the -X > > >> switch to > > >> > >> > enable > > >> > >> > > > >> full > > >> > >> > > > >> > > debug > > >> > >> > > > >> > > > > > > > logging. > > >> > >> > > > >> > > > > > > > > > > [ERROR] > > >> > >> > > > >> > > > > > > > > > > [ERROR] For more information about > the > > >> > errors > > >> > >> > and > > >> > >> > > > >> > possible > > >> > >> > > > >> > > > > > > solutions, > > >> > >> > > > >> > > > > > > > > > > please read the following articles: > > >> > >> > > > >> > > > > > > > > > > [ERROR] [Help 1] > > >> > >> > > > >> > > > > > > > > > > > > >> > >> > > > >> > > > > >> > http://cwiki.apache.org/confluence/display/MAVEN/ProjectBuil > > >> > >> > > > >> > > > > > > > > > dingException > > >> > >> > > > >> > > > > > > > > > > [ERROR] [Help 2] > > >> > >> > > > >> > > > > > > > > > > > > >> > >> > > > >> > > > > >> > http://cwiki.apache.org/confluence/display/MAVEN/Unresolvabl > > >> > >> > > > >> > > > > > > > > > eModelException > > >> > >> > > > >> > > > > > > > > > > make[1]: *** > > >> [java/target/mesos-0.21.0.jar] > > >> > >> > Error > > >> > >> > > 1 > > >> > >> > > > >> > > > > > > > > > > make[1]: Leaving directory > > >> > >> > > > >> > `/home/proxima/mesos/build/src' > > >> > >> > > > >> > > > > > > > > > > make: *** [all-recursive] Error 1 > > >> > >> > > > >> > > > > > > > > > > > > >> > >> > > > >> > > > > > > > > > > > > >> > >> > > > >> > > > > > > > > > > On Fri Oct 31 2014 at 1:09:15 PM > Sweta > > >> > Rani < > > >> > >> > > > >> > > > > > > swetarani3...@gmail.com > > >> > >> > > > >> > > > > > > > > > > >> > >> > > > >> > > > > > > > > > > wrote: > > >> > >> > > > >> > > > > > > > > > > > > >> > >> > > > >> > > > > > > > > > > > yaa.. followed the steps as > > directed > > >> in > > >> > >> the > > >> > >> > > > >> > > documentation > > >> > >> > > > >> > > > > > > > > > > > > > >> > >> > > > >> > > > > > > > > > > > *Sweta Rani* > > >> > >> > > > >> > > > > > > > > > > > *3rd Year Undergraduate* > > >> > >> > > > >> > > > > > > > > > > > *Department of Electrical > > Engineering* > > >> > >> > > > >> > > > > > > > > > > > *IIT Kharagpur < > > >> http://www.iitkgp.ac.in/ > > >> > >* > > >> > >> > > > >> > > > > > > > > > > > > > >> > >> > > > >> > > > > > > > > > > > On Fri, Oct 31, 2014 at 3:14 AM, > > >> Dominic > > >> > >> > Hamon < > > >> > >> > > > >> > > > > > > > > > dha...@twopensource.com> > > >> > >> > > > >> > > > > > > > > > > > wrote: > > >> > >> > > > >> > > > > > > > > > > > > > >> > >> > > > >> > > > > > > > > > > >> Let's tackle the easy stuff: did > > you > > >> run > > >> > >> > > > bootstrap > > >> > >> > > > >> and > > >> > >> > > > >> > > > > > configure > > >> > >> > > > >> > > > > > > > as > > >> > >> > > > >> > > > > > > > > > per > > >> > >> > > > >> > > > > > > > > > > >> the > > >> > >> > > > >> > > > > > > > > > > >> getting started doc? > > >> > >> > > > >> > > > > > > > > > > >> On Oct 30, 2014 2:04 PM, "Sweta > > >> Rani" < > > >> > >> > > > >> > > > > > swetarani3...@gmail.com> > > >> > >> > > > >> > > > > > > > > > wrote: > > >> > >> > > > >> > > > > > > > > > > >> > > >> > >> > > > >> > > > > > > > > > > >> > Tried all the suggestions and > > tips > > >> > >> given in > > >> > >> > > > JIRA > > >> > >> > > > >> and > > >> > >> > > > >> > > > > > different > > >> > >> > > > >> > > > > > > > > > google > > >> > >> > > > >> > > > > > > > > > > >> > forums but still the error > > remains > > >> > same. > > >> > >> > > > >> > > > > > > > > > > >> > > > >> > >> > > > >> > > > > > > > > > > >> > Making all in . > > >> > >> > > > >> > > > > > > > > > > >> > make[1]: Entering directory > > >> > >> > > > >> > > `/home/proxima/mesos/build' > > >> > >> > > > >> > > > > > > > > > > >> > make[1]: Nothing to be done for > > >> > >> `all-am'. > > >> > >> > > > >> > > > > > > > > > > >> > make[1]: Leaving directory > > >> > >> > > > >> > `/home/proxima/mesos/build' > > >> > >> > > > >> > > > > > > > > > > >> > Making all in 3rdparty > > >> > >> > > > >> > > > > > > > > > > >> > make[1]: Entering directory > > >> > >> > > > >> > > `/home/proxima/mesos/build/ > > >> > >> > > > >> > > > > > > > 3rdparty' > > >> > >> > > > >> > > > > > > > > > > >> > make all-recursive > > >> > >> > > > >> > > > > > > > > > > >> > make[2]: Entering directory > > >> > >> > > > >> > > `/home/proxima/mesos/build/ > > >> > >> > > > >> > > > > > > > 3rdparty' > > >> > >> > > > >> > > > > > > > > > > >> > Making all in libprocess > > >> > >> > > > >> > > > > > > > > > > >> > make[3]: Entering directory > > >> > >> > > > >> > > > > > > > > > > >> `/home/proxima/mesos/build/ > > >> > >> > > 3rdparty/libprocess' > > >> > >> > > > >> > > > > > > > > > > >> > Making all in 3rdparty > > >> > >> > > > >> > > > > > > > > > > >> > make[4]: Entering directory > > >> > >> > > > >> > > > > > > > > > > >> > > > >> > >> > > > >> > > `/home/proxima/mesos/build/3rd > > >> party/libprocess/3rdparty' > > >> > >> > > > >> > > > > > > > > > > >> > make all-recursive > > >> > >> > > > >> > > > > > > > > > > >> > make[5]: Entering directory > > >> > >> > > > >> > > > > > > > > > > >> > > > >> > >> > > > >> > > `/home/proxima/mesos/build/3rd > > >> party/libprocess/3rdparty' > > >> > >> > > > >> > > > > > > > > > > >> > Making all in stout > > >> > >> > > > >> > > > > > > > > > > >> > make[6]: Entering directory > > >> > >> > > > >> > > > > > > > > > > >> > > > >> > >> > > > >> > > > > > `/home/proxima/mesos/build/3rd > > >> > >> party/libprocess/3rdparty/ > > >> > >> > > stout' > > >> > >> > > > >> > > > > > > > > > > >> > Making all in . > > >> > >> > > > >> > > > > > > > > > > >> > make[7]: Entering directory > > >> > >> > > > >> > > > > > > > > > > >> > > > >> > >> > > > >> > > > > > `/home/proxima/mesos/build/3rd > > >> > >> party/libprocess/3rdparty/ > > >> > >> > > stout' > > >> > >> > > > >> > > > > > > > > > > >> > make[7]: Nothing to be done for > > >> > >> `all-am'. > > >> > >> > > > >> > > > > > > > > > > >> > make[7]: Leaving directory > > >> > >> > > > >> > > > > > > > > > > >> > > > >> > >> > > > >> > > > > > `/home/proxima/mesos/build/3rd > > >> > >> party/libprocess/3rdparty/ > > >> > >> > > stout' > > >> > >> > > > >> > > > > > > > > > > >> > Making all in include > > >> > >> > > > >> > > > > > > > > > > >> > make[7]: Entering directory > > >> > >> > > > >> > > > > > > > > > > >> > > > >> > >> > > > >> > > > > > > >> > `/home/proxima/mesos/build/3rdparty/libprocess/3rdparty/ > > >> > >> stou > > >> > >> > > > >> > > > > > > > > > t/include' > > >> > >> > > > >> > > > > > > > > > > >> > make[7]: Nothing to be done for > > >> `all'. > > >> > >> > > > >> > > > > > > > > > > >> > make[7]: Leaving directory > > >> > >> > > > >> > > > > > > > > > > >> > > > >> > >> > > > >> > > > > > > >> > `/home/proxima/mesos/build/3rdparty/libprocess/3rdparty/ > > >> > >> stou > > >> > >> > > > >> > > > > > > > > > t/include' > > >> > >> > > > >> > > > > > > > > > > >> > make[6]: Leaving directory > > >> > >> > > > >> > > > > > > > > > > >> > > > >> > >> > > > >> > > > > > `/home/proxima/mesos/build/3rd > > >> > >> party/libprocess/3rdparty/ > > >> > >> > > stout' > > >> > >> > > > >> > > > > > > > > > > >> > make[6]: Entering directory > > >> > >> > > > >> > > > > > > > > > > >> > > > >> > >> > > > >> > > `/home/proxima/mesos/build/3rd > > >> party/libprocess/3rdparty' > > >> > >> > > > >> > > > > > > > > > > >> > make[6]: Nothing to be done for > > >> > >> `all-am'. > > >> > >> > > > >> > > > > > > > > > > >> > make[6]: Leaving directory > > >> > >> > > > >> > > > > > > > > > > >> > > > >> > >> > > > >> > > `/home/proxima/mesos/build/3rd > > >> party/libprocess/3rdparty' > > >> > >> > > > >> > > > > > > > > > > >> > make[5]: Leaving directory > > >> > >> > > > >> > > > > > > > > > > >> > > > >> > >> > > > >> > > `/home/proxima/mesos/build/3rd > > >> party/libprocess/3rdparty' > > >> > >> > > > >> > > > > > > > > > > >> > make[4]: Leaving directory > > >> > >> > > > >> > > > > > > > > > > >> > > > >> > >> > > > >> > > `/home/proxima/mesos/build/3rd > > >> party/libprocess/3rdparty' > > >> > >> > > > >> > > > > > > > > > > >> > Making all in . > > >> > >> > > > >> > > > > > > > > > > >> > make[4]: Entering directory > > >> > >> > > > >> > > > > > > > > > > >> `/home/proxima/mesos/build/ > > >> > >> > > 3rdparty/libprocess' > > >> > >> > > > >> > > > > > > > > > > >> > make[4]: Nothing to be done for > > >> > >> `all-am'. > > >> > >> > > > >> > > > > > > > > > > >> > make[4]: Leaving directory > > >> > >> > > > >> > > > > > > > > > > >> `/home/proxima/mesos/build/ > > >> > >> > > 3rdparty/libprocess' > > >> > >> > > > >> > > > > > > > > > > >> > Making all in include > > >> > >> > > > >> > > > > > > > > > > >> > make[4]: Entering directory > > >> > >> > > > >> > > > > > > > > > > >> > > > >> > >> > > > >> > > > > `/home/proxima/mesos/build/3rdparty/libprocess/include' > > >> > >> > > > >> > > > > > > > > > > >> > make[4]: Nothing to be done for > > >> `all'. > > >> > >> > > > >> > > > > > > > > > > >> > make[4]: Leaving directory > > >> > >> > > > >> > > > > > > > > > > >> > > > >> > >> > > > >> > > > > `/home/proxima/mesos/build/3rdparty/libprocess/include' > > >> > >> > > > >> > > > > > > > > > > >> > make[3]: Leaving directory > > >> > >> > > > >> > > > > > > > > > > >> `/home/proxima/mesos/build/ > > >> > >> > > 3rdparty/libprocess' > > >> > >> > > > >> > > > > > > > > > > >> > make[3]: Entering directory > > >> > >> > > > >> > > `/home/proxima/mesos/build/ > > >> > >> > > > >> > > > > > > > 3rdparty' > > >> > >> > > > >> > > > > > > > > > > >> > make[3]: Nothing to be done for > > >> > >> `all-am'. > > >> > >> > > > >> > > > > > > > > > > >> > make[3]: Leaving directory > > >> > >> > > > >> > > > > > > `/home/proxima/mesos/build/3rdparty' > > >> > >> > > > >> > > > > > > > > > > >> > make[2]: Leaving directory > > >> > >> > > > >> > > > > > > `/home/proxima/mesos/build/3rdparty' > > >> > >> > > > >> > > > > > > > > > > >> > make[1]: Leaving directory > > >> > >> > > > >> > > > > > > `/home/proxima/mesos/build/3rdparty' > > >> > >> > > > >> > > > > > > > > > > >> > Making all in src > > >> > >> > > > >> > > > > > > > > > > >> > make[1]: Entering directory > > >> > >> > > > >> > > > > `/home/proxima/mesos/build/src' > > >> > >> > > > >> > > > > > > > > > > >> > make[1]: *** No rule to make > > target > > >> > >> `all'. > > >> > >> > > > Stop. > > >> > >> > > > >> > > > > > > > > > > >> > make[1]: Leaving directory > > >> > >> > > > >> > > > `/home/proxima/mesos/build/src' > > >> > >> > > > >> > > > > > > > > > > >> > make: *** [all-recursive] > Error 1 > > >> > >> > > > >> > > > > > > > > > > >> > > > >> > >> > > > >> > > > > > > > > > > >> > *Sweta Rani* > > >> > >> > > > >> > > > > > > > > > > >> > > > >> > >> > > > >> > > > > > > > > > > >> > > >> > >> > > > >> > > > > > > > > > > > > > >> > >> > > > >> > > > > > > > > > > > > > >> > >> > > > >> > > > > > > > > > > > > >> > >> > > > >> > > > > > > > > > > > >> > >> > > > >> > > > > > > > > > > >> > >> > > > >> > > > > > > > > > >> > >> > > > >> > > > > > > > > >> > >> > > > >> > > > > > > > >> > >> > > > >> > > > > > > >> > >> > > > >> > > > > > >> > >> > > > >> > > > > >> > >> > > > >> > > > >> > >> > > > >> > > >> > >> > > > > > > >> > >> > > > > > > >> > >> > > > > > >> > >> > > > > >> > >> > > > >> > >> > > >> > > > > >> > > > >> > > > > > >
