w zl wrote: > Hello, > I have earlier moblin on an atom based platform, I'm trying to make netgear > ma111 wireless usb adaptor work.
are the drivers for this USB hub open source? many "wireless usb" hubs do just _not_ work with linux at all. > The usb device is detected,Bus 003 Device 001: ID 0000:0000 Bus 004 Device > 003: ID 07dd:0001 Bus 004 Device 001: ID 0000:0000 Bus 002 Device 006: ID > 0846:4110 NetGear, Inc. MA111 WiFi (v1)Bus 002 Device 001: ID 0000:0000 Bus > 001 Device 001: ID 0000:0000 > However, iwconfig doesn't show wlan0 > (T: CatalystTarget)r...@ume:/etc/network# iwconfig lo no wireless > extensions. > eth0 no wireless extensions. > r...@ume:/etc/network# ifconfig > eth0 Link encap:Ethernet HWaddr 00:1B:21:1C:8A:60 inet > addr:192.168.1.8 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 > addr: fe80::21b:21ff:fe1c:8a60/64 Scope:Link UP BROADCAST RUNNING > MULTICAST MTU:1500 Metric:1 RX packets:2234 errors:0 dropped:0 > overruns:0 frame:0 TX packets:1278 errors:0 dropped:0 overruns:0 > carrier:0 collisions:0 txqueuelen:100 RX bytes:247463 > (241.6 KB) TX bytes:186980 (182.5 KB) Base address:0x3000 > Memory:93120000-93140000 > lo Link encap:Local Loopback inet addr:127.0.0.1 > Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK > RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 > overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 > carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX > bytes:0 (0.0 b) > What's my next step? (Shall i install ndiswrapper or linux-wlan-ng? > Installation of both failed on this moblin.) moblin doesn't provide either of those, you'll have to compile them yourself. Auke _______________________________________________ Moblin dev Mailing List [email protected] To manage or unsubscribe from this mailing list visit: http://lists.moblin.org/listinfo/dev or your user account on http://moblin.org once logged in. For more information on the Moblin Developer Mailing lists visit: http://moblin.org/community/mailing-lists
