> -----Original Message-----
> From: Ramya N <ramy...@tataelxsi.co.in.INVALID>
> Sent: Monday, August 10, 2020 10:42 PM
> To: dev@nuttx.apache.org
> Subject: Pre-check flow
>
> Hi,
>
> 1. In the NuttX Pre-check flow, docker image is built from "Pre-built
> Toolchain" of each architecture. If the pre-built toolchain
is not
> available, can we build the toolchain from "Toolchain Source Code" in the
> Dockerfile of incubator-nuttx-testing repo?
>
I think so, but Brennan can give more input.
> 2. The Pre-check build treats all warnings as error (Extra Flags: "-Werror").
> Can we perform Pre-check build with warnings for a
> particular architecture in a new testlist? (Extra Flags: "-w")
>
Why we need relax the check? It took a long time to fix all warning before
turning -Werror.
> Note: Fix for the warnings shall be done at the later stage, since the fix
> has to be checked for all the boards in the
architecture.
>
> Best Regards
> Ramya N
>
> ________________________________
> Disclaimer: This email and any files transmitted with it are confidential and
> intended solely for the use of the individual or
entity to
> whom they are addressed. If you are not the intended recipient of this
> message , or if this message has been addressed to you in
> error, please immediately alert the sender by reply email and then delete
> this message and any attachments. If you are not the
> intended recipient, you are hereby notified that any use, dissemination,
> copying, or storage of this message or its attachments is
> strictly prohibited. Email transmission cannot be guaranteed to be secure or
> error-free, as information could be intercepted,
> corrupted, lost, destroyed, arrive late or incomplete, or contain viruses.
> The sender, therefore, does not accept liability for
any errors,
> omissions or contaminations in the contents of this message which might have
> occurred as a result of email transmission. If
verification
> is required, please request for a hard-copy version.
> ________________________________
