Thanks! :)

On Thu, Feb 28, 2013 at 11:26 PM, Stephen Cottham <
stephen.cott...@robertbird.com.au> wrote:

> Ok just tested that now and can confirm the recording from interview plays
> back fine, and doing an inspection on the file codec shows:
>
> MPEG-4 Video (FMP4)
> Resolution 640x240
> Frame rate: 25
> Decoded format: Planar 4:2:0 YUV
>
> Looks good from my end, I'll upload the document to the wiki now.
>
> Cheers
>
>
>
> -----Original Message-----
> From: Maxim Solodovnik [mailto:solomax...@gmail.com]
> Sent: 28 February 2013 16:15
> To: dev
> Cc: Sebastian Wagner
> Subject: Re: h264 video recording
>
> H264 support was added to trunk today (already in the SVN, will be
> available with the next nightly build) Actually to see H264 in recording
> you need to record interview
>
>
> On Thu, Feb 28, 2013 at 11:10 PM, Stephen Cottham <
> stephen.cott...@robertbird.com.au> wrote:
>
> > Hey Maxim,
> >
> > Ive built the OM2.1 with the H264 codec support.
> >
> > I have recorded a video and exported it out and it plays fine, im
> > assuming that the H264 codec is being used in the latest SVN for 2.1?
> >
> > If not do you want me to test it out?
> >
> > If it is then it appears to be working fine and I will upload the
> > document for Ubuntu 12.10.
> >
> > Cheers
> >
> >
> >
> > Stephen Cottham
> > Group IT Manager (Associate)
> >
> > Robert Bird Group
> > Level 5, 333 Ann St
> > Brisbane, Queensland, 4000, Australia
> > Phone: +6173 319 2777 (AUS)
> > Phone: +44207 633 2880 (UK)
> > Fax: +6173 319 2799
> >
> > Mobile:  +61400 756 963 (AUS)
> > Mobile:  +447900 918 616 (UK)
> > Web: www.robertbird.com
> >
> >
> > This email and any attachments are confidential and may contain
> > legally privileged information or copyright material. Unless expressly
> > stated, confidentiality and/or legal privilege is not intended to be
> > waived by the sending of this email. The contents of this email,
> > including any attachments, are intended solely for the use of the
> > individual or entity to whom they are addressed. If you are not an
> > intended recipient, please contact us immediately by return email and
> > then delete both messages. You may not otherwise read, forward, copy,
> > use or disclose this email or any attachments. Any views expressed in
> > this email are those of the individual sender except where the sender
> > expressly, and with authority, states otherwise. It is your
> > responsibility to check any attachments for viruses or defects before
> > opening or sending them on. None of the sender or its related entities
> > accepts any liability for any consequential damage resulting from this
> email containing computer viruses.
> >
> > Disclaimer added by CodeTwo Exchange Rules http://www.codetwo.com
> >
> > -----Original Message-----
> > From: Maxim Solodovnik [mailto:solomax...@gmail.com]
> > Sent: 28 February 2013 14:10
> > To: dev
> > Cc: Sebastian Wagner
> > Subject: Re: h264 video recording
> >
> > done
> > video codec is changed :)
> >
> >
> > On Thu, Feb 28, 2013 at 8:53 PM, Maxim Solodovnik
> > <solomax...@gmail.com
> > >wrote:
> >
> > > @Stephen yes please :) I used
> > > https://ffmpeg.org/trac/ffmpeg/wiki/UbuntuCompilationGuide while
> > > testing
> > > :) it is very detailed.
> > >
> > >
> > > On Thu, Feb 28, 2013 at 7:40 PM, Stephen Cottham <
> > > stephen.cott...@robertbird.com.au> wrote:
> > >
> > >> Hi Maxim,
> > >>
> > >> Did you want me to include the H264 into the FFMPEG build
> instructions?
> > >>
> > >> Best Regards
> > >>
> > >>
> > >>
> > >> Stephen Cottham
> > >> Group IT Manager (Associate)
> > >>
> > >> Robert Bird Group
> > >> Level 5, 333 Ann St
> > >> Brisbane, Queensland, 4000, Australia
> > >> Phone: +6173 319 2777 (AUS)
> > >> Phone: +44207 633 2880 (UK)
> > >> Fax: +6173 319 2799
> > >>
> > >> Mobile:  +61400 756 963 (AUS)
> > >> Mobile:  +447900 918 616 (UK)
> > >> Web: www.robertbird.com
> > >>
> > >>
> > >> This email and any attachments are confidential and may contain
> > >> legally privileged information or copyright material. Unless
> > >> expressly stated, confidentiality and/or legal privilege is not
> > >> intended to be waived by the sending of this email. The contents of
> > >> this email, including any attachments, are intended solely for the
> > >> use of the individual or entity to whom they are addressed. If you
> > >> are not an intended recipient, please contact us immediately by
> > >> return email and then delete both messages. You may not otherwise
> > >> read, forward, copy, use or disclose this email or any attachments.
> > >> Any views expressed in this email are those of the individual
> > >> sender except where the sender expressly, and with authority,
> > >> states otherwise. It is your responsibility to check any
> > >> attachments for viruses or defects before opening or sending them
> > >> on. None of the sender or its related entities accepts any
> > >> liability for any
> > consequential damage resulting from this email containing computer
> viruses.
> > >>
> > >> Disclaimer added by CodeTwo Exchange Rules http://www.codetwo.com
> > >>
> > >> -----Original Message-----
> > >> From: Maxim Solodovnik [mailto:solomax...@gmail.com]
> > >> Sent: 28 February 2013 09:54
> > >> To: seba.wag...@gmail.com
> > >> Cc: dev
> > >> Subject: Re: h264 video recording
> > >>
> > >> The issue seems to be resolved
> > >> due to copy/paste parameters of H264 and camera were not in sync.
> > >> After code generalization everything is saved as expected
> > >>
> > >> I'm going to commit my changes
> > >> and ask Stephen Cottham to update his build instructions
> > >>
> > >> Is it OK?
> > >>
> > >>
> > >> On Thu, Feb 28, 2013 at 2:47 PM, seba.wag...@gmail.com <
> > >> seba.wag...@gmail.com> wrote:
> > >>
> > >> > yeah but if some ffmpeg geek looks at the actual file he might be
> > >> > also able telling us why :))
> > >> >
> > >> > Have you tried converting the flv to an avi with FFMPEG ? Does
> > >> > that
> > >> work?
> > >> >
> > >> > Sebastian
> > >> >
> > >> >
> > >> > 2013/2/28 Maxim Solodovnik <solomax...@gmail.com>
> > >> >
> > >> >> all my searches regarding ffmpeg output end up with: "your file
> > >> >> is
> > >> broken"
> > >> >> I'll try to create such report and sample video
> > >> >>
> > >> >>
> > >> >> On Thu, Feb 28, 2013 at 1:20 PM, seba.wag...@gmail.com <
> > >> >> seba.wag...@gmail.com> wrote:
> > >> >>
> > >> >>> Unfortunately I have no machine for testing and debugging now.
> > >> >>> You might put the recordings up somewhere so that I can grep
> > >> >>> them as soon as I can test it.
> > >> >>>
> > >> >>> But it would make sense to documentate the issue together with
> > >> >>> the ffmpeg command and write an email to the FFMPEG list.
> > >> >>>
> > >> >>> Sebastian
> > >> >>>
> > >> >>>
> > >> >>> 2013/2/28 Maxim Solodovnik <solomax...@gmail.com>
> > >> >>>
> > >> >>>> Should I create/send you the recordings?
> > >> >>>>
> > >> >>>>
> > >> >>>> On Thu, Feb 28, 2013 at 12:12 PM, Maxim Solodovnik <
> > >> >>>> solomax...@gmail.com> wrote:
> > >> >>>>
> > >> >>>>> The command is
> > >> >>>>> ffmpeg -i ../rec_56_stream_2_27_02_2013_20_19_36.flv -vf
> > >> >>>>> scale=320:240 -an frames/ffout%03d.png
> > >> >>>>>
> > >> >>>>> ffmpeg was compiled from the sources using this
> > >> >>>>> https://ffmpeg.org/trac/ffmpeg/wiki/UbuntuCompilationGuide
> > >> >>>>> instruction
> > >> >>>>>
> > >> >>>>> I can send you flv file(s) I have 7 (created with different
> > >> >>>>> client
> > >> >>>>> settings)
> > >> >>>>>
> > >> >>>>> but the more I'm looking at it the more I believe flv file
> > >> >>>>> created with our stream writer is broken ...
> > >> >>>>>
> > >> >>>>>
> > >> >>>>>
> > >> >>>>>
> > >> >>>>> On Thu, Feb 28, 2013 at 12:06 PM, seba.wag...@gmail.com <
> > >> >>>>> seba.wag...@gmail.com> wrote:
> > >> >>>>>
> > >> >>>>>> Did you trace it down already so that you can post the raw
> > >> >>>>>> ffmpeg command together with the raw FLV file so we can test
> > >> >>>>>> this isolated without making any recording?
> > >> >>>>>>
> > >> >>>>>> Sebastian
> > >> >>>>>>
> > >> >>>>>>
> > >> >>>>>> 2013/2/28 Maxim Solodovnik <solomax...@gmail.com>
> > >> >>>>>>
> > >> >>>>>>> Hello Sebastian,
> > >> >>>>>>>
> > >> >>>>>>> Currently I'm trying to switch video codec on client to be
> H264.
> > >> >>>>>>> The video works as expected (not sure how quality is
> > >> >>>>>>> changed) The only problem I currently have related to
> recording:
> > >> >>>>>>> While processing recording of type interview we are trying
> > >> >>>>>>> to convert flv video to the sequence of images using ffmpeg.
> > >> >>>>>>>
> > >> >>>>>>> this type of conversion is failed.
> > >> >>>>>>>
> > >> >>>>>>> I did update ffmpeg, x264 and other dependencies to have
> > >> >>>>>>> latest available version form the git.
> > >> >>>>>>> ffmpeg was rebuilt with x264 support
> > >> >>>>>>>
> > >> >>>>>>> but the video made by OM is not convertable
> > >> >>>>>>>
> > >> >>>>>>> I have tried to make changes on client (playing with
> > >> >>>>>>> H264VideoStreamSettings options) but this have minimal or
> > >> >>>>>>> no effect
> > >> >>>>>>>
> > >> >>>>>>> According to ffmpeg errors:
> > >> >>>>>>>
> > >> >>>>>>> [h264 @ 0x9c0ce60] no frame!
> > >> >>>>>>>     Last message repeated 113 times
> > >> >>>>>>>
> > >> >>>>>>> I guess some info is not written into the stream (SPS PPS)
> > >> >>>>>>> Maybe you know how stream should be serialized to have this
> > >> >>>>>>> information?
> > >> >>>>>>>
> > >> >>>>>>> Surprisingly raw flv files (like
> > >> >>>>>>> rec_56_stream_2_27_02_2013_20_19_36.flv) are played
> > >> >>>>>>> successfully using VLC player on Windows.
> > >> >>>>>>>
> > >> >>>>>>>
> > >> >>>>>>> Thanks in advance for your help
> > >> >>>>>>>
> > >> >>>>>>> --
> > >> >>>>>>> WBR
> > >> >>>>>>> Maxim aka solomax
> > >> >>>>>>>
> > >> >>>>>>
> > >> >>>>>>
> > >> >>>>>>
> > >> >>>>>> --
> > >> >>>>>> Sebastian Wagner
> > >> >>>>>> https://twitter.com/#!/dead_lock
> > >> >>>>>> http://www.webbase-design.de http://www.wagner-sebastian.com
> > >> >>>>>> seba.wag...@gmail.com
> > >> >>>>>>
> > >> >>>>>
> > >> >>>>>
> > >> >>>>>
> > >> >>>>> --
> > >> >>>>> WBR
> > >> >>>>> Maxim aka solomax
> > >> >>>>>
> > >> >>>>
> > >> >>>>
> > >> >>>>
> > >> >>>> --
> > >> >>>> WBR
> > >> >>>> Maxim aka solomax
> > >> >>>>
> > >> >>>
> > >> >>>
> > >> >>>
> > >> >>> --
> > >> >>> Sebastian Wagner
> > >> >>> https://twitter.com/#!/dead_lock http://www.webbase-design.de
> > >> >>> http://www.wagner-sebastian.com seba.wag...@gmail.com
> > >> >>>
> > >> >>
> > >> >>
> > >> >>
> > >> >> --
> > >> >> WBR
> > >> >> Maxim aka solomax
> > >> >>
> > >> >
> > >> >
> > >> >
> > >> > --
> > >> > Sebastian Wagner
> > >> > https://twitter.com/#!/dead_lock
> > >> > http://www.webbase-design.de
> > >> > http://www.wagner-sebastian.com
> > >> > seba.wag...@gmail.com
> > >> >
> > >>
> > >>
> > >>
> > >> --
> > >> WBR
> > >> Maxim aka solomax
> > >>
> > >> DQo+IC0tDQo+IFNlYmFzdGlhbiBXYWduZXINCj4gaHR0cHM6Ly90d2l0dGVyLmNv
> > >>
> > >> bS8jIS9kZWFkX2xvY2sNCj4gaHR0cDovL3d3dy53ZWJiYXNlLWRlc2lnbi5kZQ0KPiB
> > >> od
> > >> HRwOi8v
> > >>
> > >> d3d3LndhZ25lci1zZWJhc3RpYW4uY29tDQo+IHNlYmEud2FnbmVyQGdtYWlsLmNvbQ0
> > >> d3d3LndhZ25lci1zZWJhc3RpYW4uY29tDQo+KP
> > >> d3d3LndhZ25lci1zZWJhc3RpYW4uY29tDQo+g0KDQoN
> > >> Cg0KLS0NCldCUg0KTWF4aW0gYWthIHNvbG9tYXgNCg
> > >
> > >
> > >
> > >
> > > --
> > > WBR
> > > Maxim aka solomax
> > >
> >
> >
> >
> > --
> > WBR
> > Maxim aka solomax
> >
> > FrYSBzb2xvbWF4DQo+PiA+Pj4+
> >
> >
> Pg0KPj4gPj4+Pg0KPj4gPj4+Pg0KPj4gPj4+Pg0KPj4gPj4+PiAtLQ0KPj4gPj4+PiBXQlINCj4+
> >
> >
> ID4+Pj4gTWF4aW0gYWthIHNvbG9tYXgNCj4+ID4+Pj4NCj4+ID4+Pg0KPj4gPj4+DQo+PiA+Pj4N
> >
> > Cj4+ID4+PiAtLQ0KPj4gPj4+IFNlYmFzdGlhbiBXYWduZXINCj4+ID4+PiBodHRwczovL3
> > Cj4+ID4+PiAtLQ0KPj4gPj4+IFNlYmFzdGlhbiBXYWduZXINCj4+ID4+R3aXR0
> >
> > ZXIuY29tLyMhL2RlYWRfbG9jaw0KPj4gPj4+IGh0dHA6Ly93d3cud2ViYmFzZS1kZXNpZ2
> > ZXIuY29tLyMhL2RlYWRfbG9jaw0KPj4gPj4+4uZGUN
> >
> > Cj4+ID4+PiBodHRwOi8vd3d3LndhZ25lci1zZWJhc3RpYW4uY29tDQo+PiA+Pj4gc2ViYS
> > Cj4+ID4+PiBodHRwOi8vd3d3LndhZ25lci1zZWJhc3RpYW4uY29tDQo+PiA+53YWdu
> >
> >
> ZXJAZ21haWwuY29tDQo+PiA+Pj4NCj4+ID4+DQo+PiA+Pg0KPj4gPj4NCj4+ID4+IC0tDQo+PiA+
> >
> > PiBXQlINCj4+ID4+IE1heGltIGFrYSBzb2xvbWF4DQo+PiA+Pg0KPj4gPg0KPj4gPg0KPj
> > PiBXQlINCj4+ID4+IE1heGltIGFrYSBzb2xvbWF4DQo+PiA+4gPg0K
> >
> > Pj4gPiAtLQ0KPj4gPiBTZWJhc3RpYW4gV2FnbmVyDQo+PiA+IGh0dHBzOi8vdHdpdHRlci
> > Pj4gPiAtLQ0KPj4gPiBTZWJhc3RpYW4gV2FnbmVyDQo+PiA+5jb20v
> >
> > IyEvZGVhZF9sb2NrDQo+PiA+IGh0dHA6Ly93d3cud2ViYmFzZS1kZXNpZ24uZGUNCj4+ID
> > IyEvZGVhZF9sb2NrDQo+PiA+IGh0dHA6Ly93d3cud2ViYmFzZS1kZXNpZ24uZGUNCj4+4g
> > IyEvZGVhZF9sb2NrDQo+PiA+IGh0dHA6Ly93d3cud2ViYmFzZS1kZXNpZ24uZGUNCj4+aH
> > IyEvZGVhZF9sb2NrDQo+PiA+IGh0dHA6Ly93d3cud2ViYmFzZS1kZXNpZ24uZGUNCj4+R0
> >
> > cDovL3d3dy53YWduZXItc2ViYXN0aWFuLmNvbQ0KPj4gPiBzZWJhLndhZ25lckBnbWFpbC
> > 5jb20N
> >
> >
> Cj4+ID4NCj4+DQo+Pg0KPj4NCj4+IC0tDQo+PiBXQlINCj4+IE1heGltIGFrYSBzb2xvbWF4DQo+
> >
> > Pg0KPj4gRFFvK0lDMHREUW8rSUZObFltRnpkR2xoYmlCWFlXZHVaWElOQ2o0Z2FIUjBjSE
> > 02THk5
> >
> > MGQybDBkR1Z5TG1Odg0KPj4NCj4+IGJTOGpJUzlrWldGa1gyeHZZMnNOQ2o0Z2FIUjBjRG
> > MGQybDBkR1Z5TG1Odg0KPj4NCj4+92TDNk
> >
> >
> M2R5NTNaV0ppWVhObExXUmxjMmxuYmk1a1pRMEtQaUJvZA0KPj4gSFJ3T2k4dg0KPj4NCj4+IGQz
> >
> > ZDNMbmRoWjI1bGNpMXpaV0poYzNScFlXNHVZMjl0RFFvK0lITmxZbUV1ZDJGbmJtVnlRR2
> > R0WVds
> >
> > c0xtTnZiUTBLUA0KPj4gZDNkM0xuZGhaMjVsY2kxelpXSmhjM1JwWVc0dVkyOXREUW8rZz
> > BLRFFv
> >
> >
> Tg0KPj4gQ2cwS0xTME5DbGRDVWcwS1RXRjRhVzBnWVd0aElITnZiRzl0WVhnTkNnDQo+DQo+DQo+
> >
> > DQo+DQo+IC0tDQo+IFdCUg0KPiBNYXhpbSBha2Egc29sb21heA0KPg0KDQoNCg0KLS0NCl
> > DQo+DQo+IC0tDQo+dCUg0K
> > TWF4aW0gYWthIHNvbG9tYXgNCg
>
>
>
>
> --
> WBR
> Maxim aka solomax
>



-- 
WBR
Maxim aka solomax

Reply via email to