Let me do some more testing of the npm flow pls. Thanks, Om
On Wed, Sep 11, 2019, 7:04 PM Alex Harui <[email protected]> wrote: > I may have fixed the NPM issues. You can gamble and start the RC now or > wait until folks do more testing. > > -Alex > > On 9/9/19, 10:23 PM, "Piotr Zarzycki" <[email protected]> wrote: > > Ok I will wait, but I will at least try to revert changes which Maven > did > so I could perform steps properly. > > wt., 10 wrz 2019 o 07:21 Alex Harui <[email protected]> > napisał(a): > > > I'm pretty sure you have to revert the changes made by Maven > otherwise the > > version numbers will be off. And delete the tags as well. The only > thing > > you don't want to do is delete and re-create the release branches. > So make > > sure you don't run those Jenkins steps. I think you have to start > with the > > Maven Prepare steps so it creates a new tag for the Perform steps. > > > > I just tried Om's NPM changes on MacOS and am having the same > problem as > > Carlos. IMO, we should hold off on another RC until that is > resolved. > > > > My 2 cents, > > -Alex > > > > > > On 9/9/19, 10:16 PM, "Piotr Zarzycki" <[email protected]> > wrote: > > > > What I understand now is that since I have updated release > branches I > > need > > to perform maven artifacts builds, but not only - tag for RC1 > should be > > changed as well. Probably I need to start perform for each > repository > > step > > which creates for me tag, but before this is happening I need to > remove > > existing one. Am I right? > > > > wt., 10 wrz 2019 o 07:00 Piotr Zarzycki < > [email protected]> > > napisał(a): > > > > > Hi Alex, > > > > > > Ok I have updated each branches with newest changes from > develop by > > cherry > > > pickup. What actually now ? Should I perform without reverting > > anything ? > > > [1] - I will try that today - it shouldn't break anything. > > > > > > [1] > > > > > > https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fapache%2Froyale-asjs%2Fwiki%2FRelease-Steps-Jobs-On-Jenkins%23fail-and-revert&data=02%7C01%7Caharui%40adobe.com%7Ca3ef8d389f7e4f6ff40508d735af0d80%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C637036898328967212&sdata=6mHpIj33OvwPYqn2NZKEj8Gn2nUHpx0Nt3dOZKRqAGU%3D&reserved=0 > > > > > > > > > Thanks, > > > Piotr > > > > > > sob., 7 wrz 2019 o 17:51 Alex Harui <[email protected]> > > napisał(a): > > > > > >> Hi Piotr, > > >> > > >> Sure, time limitations may affect how much "development" you > can > > do, but > > >> consider that if everyone ends up taking the same approach, > then > > every > > >> future RM is going to spend time running into these issues, > or make > > >> mistakes manually uploading the artifacts and cause people to > spend > > time > > >> examining more than one release candidate. This is the key > > difference that > > >> I am pointing out. I've definitely seen you work through > tough > > problems, > > >> but most coding issues don't have as much impact on the > others on > > the team. > > >> > > >> There is no one right answer to how much sacrifice you should > make > > for > > >> the project, but I asked several times for console output and > never > > got > > >> it. It might have been nice for you to report how long these > steps > > took on > > >> your Windows computer so future RM's could plan ahead or we > could > > >> investigate optimizations or breaking steps into other > pieces. Now > > the > > >> next RM will have the responsibility for experiencing these > long > > builds and > > >> sharing that information. > > >> > > >> Regarding the current RC, I will try it later today, but I > agree > > with > > >> Andrew Wetmore that we need to have current RELEASE_NOTES, so > this > > RC > > >> should not be the one released, but I will run other checks > on it > > to see if > > >> there are other issues. Andrew's proposal for the release > notes > > sounds > > >> good to me so he or you should commit it to the release branch > > along with > > >> the link I used in prior release notes that point to our wiki. > > That way we > > >> can note other things later. > > >> > > >> For sure, thank you for the time and effort to get this far. > > >> > > >> -Alex > > >> > > >> On 9/7/19, 12:28 AM, "Piotr Zarzycki" < > [email protected]> > > wrote: > > >> > > >> Hi Alex, > > >> > > >> That is only partially true what you are saying. Cause I'm > > definitely > > >> not > > >> the person, developer who when reaching some wall do not > try to > > >> resolve it > > >> on it's own - Not that is not me. > > >> > > >> However in case of Royale release it's partially true, > but let > > me > > >> explain > > >> why I asked first rather fix and ask: > > >> > > >> Building Royale framework on Windows is extremely long - > and > > this is > > >> not > > >> limitation of my PC - I'm not the only one who > experiencing such > > >> issue. You > > >> can definitely imagine that adding one line of echo and > rebuild > > >> framework > > >> using releasesteps.xml can be challenge. - waiting 50 > minutes. > > - Yeah > > >> I can > > >> do other stuff during that time, but it is not always > possible. > > >> > > >> When I switched to Mac - all those problems simply gone. > No > > hang on > > >> some > > >> files, building is two times faster, uploading working. - > No > > problem > > >> at > > >> all. > > >> > > >> I simply wanted to count on people who are here, without > > hesitation > > >> ask for > > >> help even if I'm in a user mode - I'm doing that very > rare. > > >> > > >> To all of you who are seeing now VOTE thread - please > take some > > time > > >> and > > >> start voting, cause we finally have what we are trying to > > achieve for > > >> so > > >> many months. > > >> > > >> Thanks, > > >> Piotr > > >> > > >> sob., 7 wrz 2019 o 01:14 Alex Harui > <[email protected]> > > >> napisał(a): > > >> > > >> > Those of you in favor of debugging the automation later > must > > >> volunteer to > > >> > be the next RMs and do the debugging. > > >> > > > >> > Piotr, I'm sorry this effort took longer than expected, > but > > IMO, > > >> that's > > >> > because I apparently could not convince you to take a > > developer > > >> instead of > > >> > user mindset. By guessing at solutions and not > providing > > console > > >> output > > >> > for others to help with or adding diagnostic output to > the > > scripts, > > >> several > > >> > of your attempts failed which took a lot of your time. > I'm > > pretty > > >> sure I > > >> > said earlier that the release process is not a product > > developed and > > >> > maintained by me. We need other people to be able to > > maintain and > > >> debug > > >> > Maven and Ant scripts. > > >> > > > >> > Similarly, I have not, nor has anyone else, tried a > bunch of > > >> different > > >> > runtime configurations. I don't know what would happen > if > > you use a > > >> > different console window for each step. I don't think > the > > previous > > >> step > > >> > leaves environment variables for the next step, but I > can't > > be sure > > >> of > > >> > that. But the steps do set up files and folders to be > used > > by the > > >> next > > >> > steps. So if a working copy is not found at the folder > > specified, > > >> the > > >> > earlier step that tried to establish that working copy > needs > > to be > > >> examined. > > >> > > > >> > Should this release get the votes to go out, the > > >> releasecandidate.xml > > >> > scripts have steps that merge branches and bump version > > numbers for > > >> Ant > > >> > (Maven should already be bumped). Personally, I think > we > > need to > > >> have some > > >> > sort of updated RELEASE_NOTES file. > > >> > > > >> > When I get done with migrating WebService, and fixing > any > > issues > > >> with > > >> > virtual scrolling in ADG I will attempt to run the > steps on > > Windows > > >> that > > >> > failed for Piotr. But all of you who want to see more > > releases > > >> more often > > >> > need to try to find time to pitch in to improve the > process. > > >> > > > >> > My 2 cents, > > >> > -Alex > > >> > > > >> > On 9/6/19, 3:59 AM, "Carlos Rovira" < > [email protected]> > > >> wrote: > > >> > > > >> > Hi, > > >> > > > >> > maybe is not so bad to end this 0.9.6 manually, > since > > there was > > >> many > > >> > progress in that front. Does not need necessarily > be "all > > or > > >> nothing". > > >> > Or > > >> > 100% success. > > >> > Releasing now 0.9.6 can make lower the stress a bit > and > > make a > > >> the > > >> > 0.9.7 in > > >> > few more weeks catch the final problems. As soon as > we > > have this > > >> > working > > >> > and documentation more polished we can go to 1.0. > We can > > even > > >> go from > > >> > 0.9.7 > > >> > to 1.0 without necessarily do releases for 0.9.8 > and 0.9.9 > > >> > > > >> > just my 2ctns > > >> > > > >> > > > >> > > > >> > El vie., 6 sept. 2019 a las 11:00, Piotr Zarzycki (< > > >> > [email protected]>) escribió: > > >> > > > >> > > Hi Alex, > > >> > > > > >> > > I would love to encourage more people to be RM, > but > > >> unfortunately my > > >> > time > > >> > > which I should spend on that release was exceeded > at > > least > > >> double. I > > >> > prefer > > >> > > make now manually commit than deal with it - I'm > sorry > > about > > >> that. > > >> > > > > >> > > As for console output - you are saying that > previous > > steps > > >> matters > > >> > to that > > >> > > one ? I sounds like I should do previous step in > the > > same > > >> console > > >> > window > > >> > > cause it's influences current one. > > >> > > > > >> > > Thanks, > > >> > > Piotr > > >> > > > > >> > > śr., 4 wrz 2019 o 18:52 Alex Harui > > <[email protected]> > > >> > napisał(a): > > >> > > > > >> > > > Piotr, > > >> > > > > > >> > > > Well, I can't tell you what to do, but if we > want to > > >> encourage more > > >> > > > frequent releases and more people volunteering > to be > > the > > >> RM, at > > >> > some > > >> > > point, > > >> > > > somebody else besides me has to either create a > rather > > >> complex > > >> > > step-by-step > > >> > > > manual/runbook or help debug these scripts. I'm > > willing to > > >> help > > >> > with the > > >> > > > latter, but I cannot without seeing the console > > output of > > >> prior > > >> > steps. > > >> > > > This is a process or sequence. The steps you > run > > before > > >> matter to > > >> > the > > >> > > step > > >> > > > you are trying to run now. > > >> > > > > > >> > > > -Alex > > >> > > > > > >> > > > On 9/4/19, 9:19 AM, "Piotr Zarzycki" < > > >> [email protected]> > > >> > wrote: > > >> > > > > > >> > > > Hi Alex, > > >> > > > > > >> > > > I know that is the goal, but I simply > failed to > > meet > > >> those > > >> > goals and > > >> > > I > > >> > > > gave > > >> > > > up on that. I have artifacts and I would > like to > > release > > >> > Royale - > > >> > > > that's > > >> > > > may goal, whether I do this in 90% > automatically > > and 10% > > >> > manually > > >> > > > after so > > >> > > > many hours of work it doesn't matter to me > now. > > >> > > > > > >> > > > You are seeing full console output actually. > > Nothing > > >> more > > >> > happen > > >> > > there. > > >> > > > > > >> > > > Thanks, > > >> > > > Piotr > > >> > > > > > >> > > > śr., 4 wrz 2019 o 18:11 Alex Harui > > >> <[email protected]> > > >> > > > napisał(a): > > >> > > > > > >> > > > > Again, the goal is here to debug the > scripts, > > not to > > >> skip > > >> > them. > > >> > > > > > > >> > > > > And it is hard to help without console > output to > > >> examine. > > >> > > > > > > >> > > > > Yes, you have set the variables, but have > the > > other > > >> steps > > >> > run that > > >> > > > > generate an SVN working copy at that > > destination? > > >> Show the > > >> > console > > >> > > > output > > >> > > > > related to it. > > >> > > > > > > >> > > > > HTH, > > >> > > > > -Alex > > >> > > > > > > >> > > > > On 9/4/19, 9:01 AM, "Piotr Zarzycki" < > > >> > [email protected]> > > >> > > > wrote: > > >> > > > > > > >> > > > > From that point I will probably upload > > artifacts > > >> > manually and > > >> > > > run RC1. > > >> > > > > > > >> > > > > śr., 4 wrz 2019 o 16:30 Piotr > Zarzycki < > > >> > > > [email protected]> > > >> > > > > napisał(a): > > >> > > > > > > >> > > > > > It looks like I have another > problems. > > Target > > >> for > > >> > uploading > > >> > > ant > > >> > > > > artifacts > > >> > > > > > is failing: > > >> > > > > > > > >> > > > > > ant -f releasesteps_asjs.xml > > >> Release_Step_013_Upload > > >> > > > > > -Drelease.version=0.9.6 -Drc=1 > > >> > > > > > > > >> > > > > > Buildfile: > > >> > > > /Users/piotr/Downloads/royale/releasesteps_asjs.xml > > >> > > > > > > > >> > > > > > check-name-and-svn: > > >> > > > > > [echo] Name: 'Piotr Zarzycki' > > >> > > > > > [echo] svn.dist.dev: > > >> > > > /Users/piotr/Downloads/royale/dist/dev > > >> > > > > > [echo] svn.dist.release: > > >> > > > > /Users/piotr/Downloads/royale/dist/release > > >> > > > > > [echo] svn: /usr/bin/svn > > >> > > > > > > > >> > > > > > BUILD FAILED > > >> > > > > > > > >> > > /Users/piotr/Downloads/royale/releasesteps_asjs.xml:1537: The > > >> > > > > svn.dist.dev > > >> > > > > > property is not set to the working > copy > > for > > >> > > > > > > > >> > > > > > > >> > > > > > >> > > > > >> > > > >> > > > https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fdist.apache.org%2Frepos%2Fdist%2Fdev&data=02%7C01%7Caharui%40adobe.com%7Ca3ef8d389f7e4f6ff40508d735af0d80%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C637036898328967212&sdata=m6A4ScrDbcq7j%2FUlnKhfmxozs0sG8Bi8qo%2BobdYeIZw%3D&reserved=0 > > >> > > > > . > > >> > > > > > > > >> > > > > > As you can see above I have all > properties > > >> setup cause > > >> > I made > > >> > > > an > > >> > > > > echo. I > > >> > > > > > don't understand what is > happening... > > >> > > > > > > > >> > > > > > Thanks, > > >> > > > > > Piotr > > >> > > > > > > > >> > > > > > śr., 4 wrz 2019 o 13:13 Piotr > Zarzycki < > > >> > > > [email protected]> > > >> > > > > > napisał(a): > > >> > > > > > > > >> > > > > >> I was able to produce ant > artifacts on > > Mac! I > > >> will > > >> > try get > > >> > > an > > >> > > > RC1 > > >> > > > > today. > > >> > > > > >> > > >> > > > > >> śr., 4 wrz 2019 o 11:11 Yishay > Weiss < > > >> > > [email protected]> > > >> > > > > napisał(a): > > >> > > > > >> > > >> > > > > >>> Here’s what I’ve got. > > >> > > > > >>> > > >> > > > > >>> > > >> > > > > >>> > > >> > > > > >>> ANT_HOME > > >> > > > > >>> > > >> > > > > >>> C:\dev\ant\apache-ant-1.10.1 > > >> > > > > >>> > > >> > > > > >>> > > >> > > > > >>> > > >> > > > > >>> ________________________________ > > >> > > > > >>> From: Piotr Zarzycki < > > >> [email protected]> > > >> > > > > >>> Sent: Wednesday, September 4, 2019 > > 11:56:02 AM > > >> > > > > >>> To: [email protected] < > > >> [email protected]> > > >> > > > > >>> Subject: Re: Discuss of release > steps > > >> preparation > > >> > > > > >>> > > >> > > > > >>> Hi Yishay, > > >> > > > > >>> > > >> > > > > >>> It was pretty stupid from my > sight. I > > was > > >> certain > > >> > that I > > >> > > > have this > > >> > > > > env > > >> > > > > >>> variable setup, cause ant is > working > > for me. > > >> I have > > >> > no idea > > >> > > > how. > > >> > > > > Let me > > >> > > > > >>> set > > >> > > > > >>> it and see whether it help. > > >> > > > > >>> > > >> > > > > >>> Thanks, > > >> > > > > >>> Piotr > > >> > > > > >>> > > >> > > > > >>> śr., 4 wrz 2019 o 10:37 Yishay > Weiss < > > >> > > [email protected] > > >> > > > > > > >> > > > > >>> napisał(a): > > >> > > > > >>> > > >> > > > > >>> > > > > >> > > > > >>> > > > >> > > > > >>> > > >> > > > > > > >> > > > > > >> > > > > >> > > > >> > > > /Users/piotr/Downloads/royale/release/releaseasjs_ant/sources/royale-asjs/build.xml:1636: > > >> > > > > >>> > > > >> > > > > >>> > > >> > > > > > > >> > > > > > >> > > > > >> > > > >> > > > /Users/piotr/Downloads/royale/release/releaseasjs_ant/sources/royale-asjs/${env.ANT_HOME}/lib > > >> > > > > >>> > does not exist. > > >> > > > > >>> > > > >> > > > > >>> > > > >> > > > > >>> > > > >> > > > > >>> > Is ANT_HOME env var defined? > > >> > > > > >>> > > > >> > > > > >>> > > > >> > > > > >>> > > > >> > > > > >>> > ________________________________ > > >> > > > > >>> > From: Piotr Zarzycki < > > >> [email protected]> > > >> > > > > >>> > Sent: Wednesday, September 4, > 2019 > > 11:24:09 > > >> AM > > >> > > > > >>> > To: [email protected] < > > >> [email protected]> > > >> > > > > >>> > Subject: Re: Discuss of release > steps > > >> preparation > > >> > > > > >>> > > > >> > > > > >>> > Hi, > > >> > > > > >>> > > > >> > > > > >>> > It moved farther, but failed > with > > different > > >> > stacktrace > > >> > > > [1]. I > > >> > > > > will try > > >> > > > > >>> to > > >> > > > > >>> > investigate this, unless > someone has > > >> immediate > > >> > idea why I > > >> > > > got > > >> > > > > that > > >> > > > > >>> issue. > > >> > > > > >>> > > > >> > > > > >>> > [1] > > >> > > > > > > >> > > > > > >> > > > > >> > > > >> > > > https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpaste.apache.org%2Fr48at&data=02%7C01%7Caharui%40adobe.com%7Ca3ef8d389f7e4f6ff40508d735af0d80%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C637036898328967212&sdata=d%2Bn1dD%2BkBImwyFWLNdIebHaLMVpnigL6xEmYD93qA9c%3D&reserved=0 > > >> > > > > >>> > > > >> > > > > >>> > Thanks, > > >> > > > > >>> > Piotr > > >> > > > > >>> > > > >> > > > > >>> > śr., 4 wrz 2019 o 07:36 Alex > Harui > > >> > > > <[email protected]> > > >> > > > > >>> napisał(a): > > >> > > > > >>> > > > >> > > > > >>> > > FWIW, my Mac has: > > >> > > > > >>> > > > > >> > > > > >>> > > > > >> FLASHPLAYER_DEBUGGER='/Users/xxxx/yyy/Flash > > >> > Player > > >> > > > > >>> > > > Debugger.app/Contents/MacOS/Flash > > Player > > >> > Debugger' > > >> > > > > >>> > > > > >> > > > > >>> > > Note the single quotes > instead of > > escaped > > >> spaces > > >> > as > > >> > > > described > > >> > > > > in the > > >> > > > > >>> > > README. I think some code in > Ant > > or the > > >> compiler > > >> > > doesn't > > >> > > > > handle > > >> > > > > >>> escaping > > >> > > > > >>> > > spaces correctly. > > >> > > > > >>> > > > > >> > > > > >>> > > The point of having someone > else be > > the > > >> RM is to > > >> > debug > > >> > > > the Ant > > >> > > > > >>> scripts > > >> > > > > >>> > and > > >> > > > > >>> > > other parts of the release > process, > > and > > >> also to > > >> > make > > >> > > > sure at > > >> > > > > least > > >> > > > > >>> one > > >> > > > > >>> > > other person on this project > knows > > how > > >> these > > >> > scripts > > >> > > > work and > > >> > > > > can > > >> > > > > >>> help > > >> > > > > >>> > > maintain them. So even if > you do > > get it > > >> working > > >> > on Mac > > >> > > > it > > >> > > > > will still > > >> > > > > >>> > mean > > >> > > > > >>> > > that there is a bug in the > process > > on > > >> Windows. > > >> > I could > > >> > > > go try > > >> > > > > the > > >> > > > > >>> > scripts > > >> > > > > >>> > > on Windows, but I'd rather see > > someone > > >> else > > >> > learn how > > >> > > to > > >> > > > debug > > >> > > > > these > > >> > > > > >>> > > scripts. I do not think I've > seen > > any > > >> console > > >> > output > > >> > > > posted > > >> > > > > that > > >> > > > > >>> might > > >> > > > > >>> > > give a clue as to why those > files > > get > > >> locked, > > >> > nor have > > >> > > I > > >> > > > seen > > >> > > > > any > > >> > > > > >>> mention > > >> > > > > >>> > > of modifying the scripts to > add more > > >> debugging > > >> > output > > >> > > > around > > >> > > > > where > > >> > > > > >>> Ant > > >> > > > > >>> > > tasks get loaded. > > >> > > > > >>> > > > > >> > > > > >>> > > I haven't tried this myself, > but > > there are > > >> > supposedly > > >> > > > tools to > > >> > > > > show > > >> > > > > >>> what > > >> > > > > >>> > > app has locked a file: > > >> > > > > >>> > > > > >> > > > > >>> > > > >> > > > > >>> > > >> > > > > > > >> > > > > > >> > > > > >> > > > >> > > > https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fhelpcenter.gsx.com%2Fhc%2Fen-us%2Farticles%2F115015880627-How-to-Identify-which-Windows-Process-is-Locking-a-File-or-Folder&data=02%7C01%7Caharui%40adobe.com%7Ca3ef8d389f7e4f6ff40508d735af0d80%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C637036898328967212&sdata=qjD%2B1n0u%2BbU9evx7FoEy8bXlqshguiuLbY1FwPWBswQ%3D&reserved=0 > > >> > > > > >>> > > > > >> > > > > >>> > > HTH, > > >> > > > > >>> > > -Alex > > >> > > > > >>> > > > > >> > > > > >>> > > On 9/3/19, 2:27 PM, "Piotr > > Zarzycki" < > > >> > > > > [email protected]> > > >> > > > > >>> wrote: > > >> > > > > >>> > > > > >> > > > > >>> > > Carlos, > > >> > > > > >>> > > > > >> > > > > >>> > > I have both, but I'm > prime user > > on > > >> Windows. > > >> > Mac is > > >> > > > used > > >> > > > > only to > > >> > > > > >>> test > > >> > > > > >>> > > stuff > > >> > > > > >>> > > ;) > > >> > > > > >>> > > > > >> > > > > >>> > > I have failed so many > times on > > >> Windows so I > > >> > decided > > >> > > > > configure > > >> > > > > >>> stuff > > >> > > > > >>> > on > > >> > > > > >>> > > Mac > > >> > > > > >>> > > and try there. > > >> > > > > >>> > > > > >> > > > > >>> > > I will try tomorrow some > of > > your tips. > > >> > > > > >>> > > > > >> > > > > >>> > > Thanks, > > >> > > > > >>> > > Piotr > > >> > > > > >>> > > > > >> > > > > >>> > > On Tue, Sep 3, 2019, 7:39 > PM > > Carlos > > >> Rovira < > > >> > > > > >>> [email protected]> > > >> > > > > >>> > > wrote: > > >> > > > > >>> > > > > >> > > > > >>> > > > Hi Piotr, sorry I didn't > > recall that > > >> > you're on > > >> > > > windows, > > >> > > > > not > > >> > > > > >>> Mac. So > > >> > > > > >>> > > all the > > >> > > > > >>> > > > "Content" stuff is not > valid, > > is > > >> something > > >> > Mac > > >> > > > related. > > >> > > > > >>> > > > > > >> > > > > >>> > > > El mar., 3 sept. 2019 a > las > > 18:50, > > >> Piotr > > >> > Zarzycki > > >> > > > (< > > >> > > > > >>> > > > > [email protected]>) > > >> escribió: > > >> > > > > >>> > > > > > >> > > > > >>> > > > > ok it failed. How > should I > > put in > > >> > bash_profile > > >> > > > file > > >> > > > > this > > >> > > > > >>> path so > > >> > > > > >>> > > it would > > >> > > > > >>> > > > > be understandable? > > >> > > > > >>> > > > > > > >> > > > > >>> > > > > export > > >> > > > > >>> > > > > > > >> > > > > >>> > > > > > > >> > > > > >>> > > > > > >> > > > > >>> > > > > >> > > > > >>> > > > >> > > > > >>> > > >> > > > > > > >> > > > > > >> > > > > >> > > > >> > > > FLASHPLAYER_DEBUGGER=/Users/piotr/Downloads/player/flashplayer.app/Contents/MacOS/Flash > > >> > > > > >>> > > > > Player Debugger > > >> > > > > >>> > > > > > > >> > > > > >>> > > > > On Windows we would > > probably go > > >> with: > > >> > > > > >>> > > > > > > >> > > > > >>> > > > > > > >> > > > > >>> > > > > > > >> > > > > >>> > > > > > >> > > > > >>> > > > > >> > > > > >>> > > > >> > > > > >>> > > >> > > > > > > >> > > > > > >> > > > > >> > > > >> > > > FLASHPLAYER_DEBUGGER="/Users/piotr/Downloads/player/flashplayer.app/Contents/MacOS/Flash > > >> > > > > >>> > > > > Player Debugger" > > >> > > > > >>> > > > > > > >> > > > > >>> > > > > > > >> > > > > >>> > > > > > > >> > > > > >>> > > > > > > >> > > > > >>> > > > > > > >> > > > > >>> > > > > wt., 3 wrz 2019 o > 18:34 > > Piotr > > >> Zarzycki < > > >> > > > > >>> > [email protected]> > > >> > > > > >>> > > > > napisał(a): > > >> > > > > >>> > > > > > > >> > > > > >>> > > > > > I have path exactly > the > > same as > > >> Josh > > >> > mention > > >> > > > placed > > >> > > > > in bash > > >> > > > > >>> > > script. I > > >> > > > > >>> > > > > just > > >> > > > > >>> > > > > > run build and will > see > > whether > > >> this > > >> > help. > > >> > > > However > > >> > > > > after > > >> > > > > >>> > printenv > > >> > > > > >>> > > I see > > >> > > > > >>> > > > > that > > >> > > > > >>> > > > > > path is cutted cause > > there are > > >> spaces > > >> > in file > > >> > > > name. > > >> > > > > On > > >> > > > > >>> windows > > >> > > > > >>> > > it would > > >> > > > > >>> > > > > not > > >> > > > > >>> > > > > > work, but maybe on > it is > > >> different. We > > >> > will > > >> > > > see. > > >> > > > > >>> > > > > > > > >> > > > > >>> > > > > > wt., 3 wrz 2019 o > 17:32 > > Carlos > > >> Rovira < > > >> > > > > >>> [email protected] > > >> > > > > >>> > > > > >> > > > > >>> > > > > > napisał(a): > > >> > > > > >>> > > > > > > > >> > > > > >>> > > > > >> Hi Piotr, this is > what I > > use > > >> in my > > >> > > > .bash_profile: > > >> > > > > >>> > > > > >> > > >> > > > > >>> > > > > >> export > > >> > > > FLASHPLAYER_DEBUGGER=/Applications/Flash\ > > >> > > > > >>> > > > > >> > > >> Player.app/Contents/MacOS/Flash\ > > >> > Player\ > > >> > > > Debugger > > >> > > > > >>> > > > > >> > > >> > > > > >>> > > > > >> > > >> > > > > >>> > > > > >> El mar., 3 sept. > 2019 a > > las > > >> 17:04, > > >> > Piotr > > >> > > > Zarzycki (< > > >> > > > > >>> > > > > >> > > [email protected]>) > > >> escribió: > > >> > > > > >>> > > > > >> > > >> > > > > >>> > > > > >> > Hey Josh, > > >> > > > > >>> > > > > >> > > > >> > > > > >>> > > > > >> > Thank you so > much! I > > will > > >> check it > > >> > out > > >> > > soon. > > >> > > > > >>> > > > > >> > > > >> > > > > >>> > > > > >> > On Tue, Sep 3, > 2019, > > 4:48 PM > > >> Josh > > >> > Tynjala > > >> > > < > > >> > > > > >>> > > > > [email protected]> > > >> > > > > >>> > > > > >> > wrote: > > >> > > > > >>> > > > > >> > > > >> > > > > >>> > > > > >> > > I think you > need to > > point > > >> to the > > >>
