Hi Chris, Intellij takes the changes because it goes to the source (.m2 folder) and you're using the flexmojos and not a distribution (sdk), so it's normal you see it ok. If IntelliJ have Royale support, it will be fantastic, but since the support is very restricted, I think is not a real IDE option right now :( Maybe if we could create some extension (open source) for Intellij...
El mié., 21 oct. 2020 a las 11:53, Christofer Dutz (< christofer.d...@c-ware.de>) escribió: > Hi Piotr, > > IntelliJ seems to be picking up the changes almost instantly ... > > But as I said, we could add a profile to automatically also install > artifacts to the distribution, if that helps reduce the build time on > Windows > (dam ... gonna be interesting how my build times will change once I switch > from my stupid Mac to my new Dell ... once I get it ... if I get it) > > Chris > > > > Am 21.10.20, 10:51 schrieb "Piotr Zarzycki" <piotrzarzyck...@gmail.com>: > > Hi Chris, > > What I mean is If I change Button in Basic module - I build by ANT it > - I > have swc - When user point in IDE folder with Royale sources that > changes > in Button will be seen in code completion. > > If I do the same with Maven - I won't see those changes, unless I do > full > rebuild with distribution option. > > Am I missing something? > > Thanks, > Piotr > > śr., 21 paź 2020 o 10:46 Christofer Dutz <christofer.d...@c-ware.de> > napisał(a): > > > Hi Piotr, > > > > do you mean that if you build a single module that only this module > is > > updated in the distribution? > > Cause if you use maven in your IDE actually just doing a "mvn > install" > > should be all you need. > > > > We could probably add a profile to automatically install a copy of > the > > resources in the provided distribution folder directly without going > > through the assembly plugin. > > > > I'm all for helping get the developer experience to match that of > the Ant > > build. > > > > Chris > > > > > > > > > > Am 21.10.20, 10:30 schrieb "Piotr Zarzycki" < > piotrzarzyck...@gmail.com>: > > > > Carlos, > > > > I'm skipping rat stuff on my own responsibility and I know how > it may > > end > > up. :) > > > > Problem with Maven way is that in this specific case which Yishay > > experience there is no way workaround it. In ANT you can build > one > > module > > and have it seen immediately in IDE - with Maven you have to > build > > whole > > SDK with distribution - on windows it takes time and resources. > > > > It would be good to have something in Maven like in ANT. > > > > Thanks, > > Piotr > > > > śr., 21 paź 2020 o 10:18 Carlos Rovira <carlosrov...@apache.org> > > napisał(a): > > > > > Hi Yishay, Piotr > > > > > > to complement, If you have a VSCode window with MXRoyale > openned you > > can > > > build in the VSCode terminal: > > > > > > ( > > > first a warning: > > > -Drat.skip=true -> doing this will not check rat, and if you > add a > > class > > > without license will break the build so better don't use it > > > -Dgenerate.swf.swcs=true -> doesn't exists anymore, since was > > refactored > > > many months ago to a friendly maven option schema > > > ) > > > > > > Now: > > > > > > - *ANT*: just call "*ant*" > > > - If you're building in your royale-asjs folder since > use to > > be an > > > SDK itself (if you use to do and -all inside) you'll see > the > > changes > > > restarting VSCode > > > - *Maven*: *mvn clean install -P option-with-swf* > (optional you > > can add > > > -DskipTests > > > - When you use the library you directly get the new build > > since Maven > > > update the local .m2 repo > > > - VSCode: You don't get the SDK updated so VSCode > doesn't know > > about > > > the change, you need to rebuild the SDK with maven what > use to > > be a > > > quick > > > task doing this inside royale-asjs: > > > - cd distribution > > > - mvn clean install > > > > > > > > > -DdistributionTargetFolder=/Users/<you-user>/Dev/Royale/Sdks/apache-royale-maven > > > > > > (Notice I don't need to add here *-P with-distribution*) > > > > > > So, it depends if you have VSCode pointing to an SDK generated > by > > ANT or my > > > MAVEN. > > > This is what I do: > > > > > > 1. pass a script that builds Maven and ANT (daily first > thing in > > the > > > morning) > > > 2. If I change (add, remove, updte) anything on a library > in the > > SDK, I > > > build with Maven on VSCode then ANT (VSCode too). > > > 3. I have my VSCode using Maven SDK, so I build maven > > distribution (as > > > showed before) and restart VSCode) > > > 1. Instead I could have my VScode pointing to > royale-asjs with > > SDK > > > built, that way just restarting VSCode take the changes, > since > > the > > > "ant" > > > command updated the SDK in royale-asjs. > > > > > > HTH > > > > > > Carlos > > > > > > > > > > > > > > > > > > > > > El mié., 21 oct. 2020 a las 8:08, Piotr Zarzycki (< > > > piotrzarzyck...@gmail.com>) > > > escribió: > > > > > > > I think smart IDE like Intellij is able to recognize changes > using > > Maven > > > > script, but VSCode or Moonshine definitely not. > > > > > > > > śr., 21 paź 2020 o 08:04 Piotr Zarzycki < > piotrzarzyck...@gmail.com > > > > > > > napisał(a): > > > > > > > > > Well if you wanted to have code completion etc - you have > to do > > that > > > > > again, but in general you are using Maven (to try your > Royale > > code) and > > > > do > > > > > distribution build once in a while. > > > > > > > > > > When I add property in Button - I usually don't care > whether I > > see it > > > > > immediately in code completion - I'm checking if it's > working: > > > > > > > > > > 1) I'm building by maven module where the changes are "mvn > clean > > > install" > > > > > 2) I'm building my app with that changes "mvn clean > install" > > > > > > > > > > I know with ant you are building module and result of that > build > > is > > > > > immediately put inside royale folder, but with Maven option > > "install" > > > > > putting it here: > > c:\Users\{youruser}\.m2\repository\org\apache\royale\ > > > > > > > > > > > > > > > śr., 21 paź 2020 o 07:57 Yishay Weiss < > yishayj...@hotmail.com> > > > > napisał(a): > > > > > > > > > >> And then if I e.g. change MXRoyale and do mvn clean > install > > will the > > > SDK > > > > >> be updated accordingly? > > > > >> > > > > >> From: Piotr Zarzycki<mailto:piotrzarzyck...@gmail.com> > > > > >> Sent: Wednesday, October 21, 2020 8:54 AM > > > > >> To: Apache Royale Development<mailto: > dev@royale.apache.org> > > > > >> Subject: Re: Using Mvn Build as SDK Home > > > > >> > > > > >> Hi, > > > > >> > > > > >> This is my command line: > > > > >> > > > > >> mvn clean install -P with-distribution -DskipTests > > -Drat.skip=true > > > > >> -Dgenerate.swf.swcs=true -DdistributionTargetFolder=path > > > > >> > > > > >> > > > > >> > > > > >> śr., 21 paź 2020 o 07:31 Yishay Weiss < > yishayj...@hotmail.com> > > > > >> napisał(a): > > > > >> > > > > >> > When I build SDK with ant I can just point VSCode to > > royale-asjs and > > > > it > > > > >> > can use it to compile. How do I do that if I build SDK > with > > mvn? > > > > >> > > > > > >> > > > > > >> > > > > >> -- > > > > >> > > > > >> Piotr Zarzycki > > > > >> > > > > >> > > > > > > > > > > -- > > > > > > > > > > Piotr Zarzycki > > > > > > > > > > > > > > > > > -- > > > > > > > > Piotr Zarzycki > > > > > > > > > > > > > -- > > > Carlos Rovira > > > Apache Member & Apache Royale PMC > > > *Apache Software Foundation* > > > http://about.me/carlosrovira > > > > > > > > > -- > > > > Piotr Zarzycki > > > > > > -- > > Piotr Zarzycki > > -- Carlos Rovira Apache Member & Apache Royale PMC *Apache Software Foundation* http://about.me/carlosrovira