Hi Stefano, I did install Pax-Runner-UI from UniversAAL but I am having some difficulty. Maybe I will figure it out soon.
I have the 60W GE Link bulb, it is working fine. This is very inexpensive here, only $15 USD, and available at the local hardware store. http://gelinkbulbs.com/ I also have the two Centralite 3-Series modules, this: http://www.centralite.com/index.php/products/3-series/3-series-lamp-module/ And this: http://www.centralite.com/index.php/products/3-series/3-series-appliance-module/ They are a bit newer than the one I linked before. Most things are working, but they have the ability to report power consumption which I'm most interested in. Specifically they show clusters 0x0B04 and 0x0B05. I am not sure the format of these clusters, I have found two descriptions for 0x0B04. Note these documents are "proposed" and not ratified. http://www.energy-home.it/Documents/Technical%20Specifications/E@h_specification_ver2.0.pdf http://www.docstoc.com/docs/147321957/docs-11-5734-20-00ha-electrical-measurement-cluster-draft-spec Maybe it is the E@h specification that these newer ones work with. Thanks, Ryan On Fri, Dec 5, 2014 at 7:24 AM, Stefano 'Kismet' Lenzi <[email protected]> wrote: > HI Ryan, > > I think that Fabio can help you with the issue reported in > http://zb4osgi.aaloa.org/pipermail/dev/2014-November/001061.html > > Running within Eclipse is kind of complex because you need the Pax-Runner-UI > from OPS4J which as far as I know is not supported nor developed anymore, so > I recommend using remote debugging for testing the environment or you may > try to define an execution environment with Eclipse PDE or with OSGi EnRoute > (but you will be on an unknown field, so any tutorial after your experience > would be welcomed -_^ ) > > If you are going to extend ZB4O with new Cluster we will appreciate it as > contribution, do not hesitate to ask for help :) It means also that you are > using http://www.centralite.com/ devices, am I right? Which devices have you > tested so far? > > According to the documentation > (http://centralite.readthedocs.org/en/latest/devices/lights/usdimmer.html) > it seems to me that the "Electrical Measurement" cluster is a Vendor > specific cluster that does not belong to any ZigBee published standard (as > far as could look on the ZigBee specification), can you correct me on this? > > Ciao, > Stefano > > On Thu, Dec 4, 2014 at 8:19 PM, Ryan Press <[email protected]> wrote: >> >> Hi Stefano, >> >> Yes, thanks, I saw your other answer, and replied to it: >> >> http://zb4osgi.aaloa.org/pipermail/dev/2014-November/001061.html >> >> I know the server was down maybe some mail was lost. Thanks again, if >> you have some information on the firmware that would be nice. >> >> Also I want to try it in Eclipse. I see there are some launch files >> under zigbee.ha.driver. >> >> I am now going to try implementing "Electrical Measurement" cluster. >> Here is (almost) my device: >> http://centralite.readthedocs.org/en/latest/devices/lights/usdimmer.html >> It should be straightforward to do this, I think. >> >> Thanks, >> Ryan >> >> >> On Tue, Dec 2, 2014 at 9:23 AM, Stefano Lenzi <[email protected]> >> wrote: >> > Hi Ryan, >> > >> > I thought that I answered to you, but considering that I was writing >> > with my >> > mobile something has gone wrong and my e-mail never reached you... >> > Please look at my commet inline >> > >> > Ciao, >> > Stefano >> > >> > Il 26/11/2014 17:26, Ryan Press ha scritto: >> >> >> >> Hi Francesco, >> >> >> >> Yes, it gets further now, thanks! But I see this error when it runs >> >> the >> >> tests: >> >> >> >> Tests run: 1, Failures: 1, Errors: 0, Skipped: 0, Time elapsed: 0.021 >> >> sec <<< FAILURE! - in >> >> it.cnr.isti.zigbee.basedriver.communication.AFLayerTest >> >> >> >> >> >> getSendingEndpointZigBeeDeviceCluster(it.cnr.isti.zigbee.basedriver.communication.AFLayerTest) >> >> Time elapsed: 0.021 sec <<< FAILURE! >> >> java.lang.AssertionError: >> >> Unexpected method call getProperty("it.cnr.isti.zigbee.pan.id"): >> >> at >> >> >> >> org.easymock.internal.MockInvocationHandler.invoke(MockInvocationHandler.java:45) >> >> at >> >> >> >> org.easymock.internal.ObjectMethodsFilter.invoke(ObjectMethodsFilter.java:73) >> >> at com.sun.proxy.$Proxy5.getProperty(Unknown Source) >> >> at >> >> it.cnr.isti.osgi.util.OSGiProperties.getInt(OSGiProperties.java:131) >> >> at >> >> >> >> it.cnr.isti.zigbee.basedriver.configuration.ConfigurationService.<init>(ConfigurationService.java:66) >> >> at >> >> >> >> it.cnr.isti.zigbee.basedriver.api.test.ZigBeeBaseDriverTestUnitBase.<init>(ZigBeeBaseDriverTestUnitBase.java:75) >> >> at >> >> >> >> it.cnr.isti.zigbee.basedriver.communication.AFLayerTest.<init>(AFLayerTest.java:67) >> >> >> >> Anyone have an idea with this one? >> > >> > >> > I have to look as such Test Failure, but the best way for you is to >> > build by >> > skipping the test. Maven allows you to skip tests by addin -DskipTests >> > as >> > parameter, thus you have to execute the command >> > mvn -DskipTests install >> > instead of >> > mvn install >> > >> > >> > >> >> >> >> Thanks again, >> >> Ryan >> >> >> >> >> >> >> >> On Wed, Nov 26, 2014 at 7:36 AM, Francesco Potortì >> >> <[email protected]> >> >> wrote: >> >>>> >> >>>> I'm trying to build zb4osgi, but for the past few days I get Error >> >>>> 503 >> >>>> when trying to access http://nexus.aaloa.org. Is this server down? >> >>> >> >>> It should be fixed now. Can you try again? >> >>> >> >>> -- >> >>> Francesco Potortì (ricercatore) Voice: +39.050.621.3058 >> >>> ISTI - Area della ricerca CNR Mobile: +39.348.8283.107 >> >>> via G. Moruzzi 1, I-56124 Pisa Skype: wnlabisti >> >>> (entrance 20, 1st floor, room C71) Web: http://fly.isti.cnr.it >> >>> >> >>> _______________________________________________ >> >>> Dev mailing list >> >>> [email protected] >> >>> http://zb4osgi.aaloa.org/mailman/listinfo/dev >> >> >> >> _______________________________________________ >> >> Dev mailing list >> >> [email protected] >> >> http://zb4osgi.aaloa.org/mailman/listinfo/dev >> > >> > >> > >> > -- >> > Dr. Stefano Lenzi >> > OSGi Invited Researcher >> > Tel: +39 050 621 2844 >> > Fax: +39 050 315 2811 >> > Skype: kismet-sl >> > Istituto di Scienza e Tecnologie dell’Informazione “A. Faedo” >> > Consiglio Nazionale delle Ricerche >> > Via Moruzzi, 1, 56124 - Pisa - Italy - Stanza C66 >> > >> > >> > _______________________________________________ >> > Dev mailing list >> > [email protected] >> > http://zb4osgi.aaloa.org/mailman/listinfo/dev >> > >> >> _______________________________________________ >> Dev mailing list >> [email protected] >> http://zb4osgi.aaloa.org/mailman/listinfo/dev > > > > _______________________________________________ > Dev mailing list > [email protected] > http://zb4osgi.aaloa.org/mailman/listinfo/dev > _______________________________________________ Dev mailing list [email protected] http://zb4osgi.aaloa.org/mailman/listinfo/dev
