Il 05/Dic/2014 19:15 "Ryan Press" <[email protected]> ha scritto: > > Hi Stefano, > > I did install Pax-Runner-UI from UniversAAL but I am having some > difficulty. Maybe I will figure it out soon. >
Unfortunately universAAL Pax Runner UI has some issues so my advice is to use remote debugging by executing ZB4O inside "Pax Runner" or Karaf > I have the 60W GE Link bulb, it is working fine. This is very > inexpensive here, only $15 USD, and available at the local hardware > store. > http://gelinkbulbs.com/ > > I also have the two Centralite 3-Series modules, this: > http://www.centralite.com/index.php/products/3-series/3-series-lamp-module/ > And this: > http://www.centralite.com/index.php/products/3-series/3-series-appliance-module/ > WoW those are a big set of devices, I would suggest you to update our wiki with your compatibility result or even the Google speeedshet with the list of tested devices > They are a bit newer than the one I linked before. Most things are > working, but they have the ability to report power consumption which > I'm most interested in. Specifically they show clusters 0x0B04 and > 0x0B05. > I am not sure the format of these clusters, I have found two > descriptions for 0x0B04. Note these documents are "proposed" and not > ratified. > http://www.energy-home.it/Documents/Technical%20Specifications/E@h_specification_ver2.0.pdf > http://www.docstoc.com/docs/147321957/docs-11-5734-20-00ha-electrical-measurement-cluster-draft-spec > > Maybe it is the E@h specification that these newer ones work with. > We have some support for E@H profile, you should compile and run the zigbee.eh.driver Moreover the E@H specofoation should be part of ZigBee 3.0 as far as I know > > Thanks, > Ryan > > > On Fri, Dec 5, 2014 at 7:24 AM, Stefano 'Kismet' Lenzi > <[email protected]> wrote: > > HI Ryan, > > > > I think that Fabio can help you with the issue reported in > > http://zb4osgi.aaloa.org/pipermail/dev/2014-November/001061.html > > > > Running within Eclipse is kind of complex because you need the Pax-Runner-UI > > from OPS4J which as far as I know is not supported nor developed anymore, so > > I recommend using remote debugging for testing the environment or you may > > try to define an execution environment with Eclipse PDE or with OSGi EnRoute > > (but you will be on an unknown field, so any tutorial after your experience > > would be welcomed -_^ ) > > > > If you are going to extend ZB4O with new Cluster we will appreciate it as > > contribution, do not hesitate to ask for help :) It means also that you are > > using http://www.centralite.com/ devices, am I right? Which devices have you > > tested so far? > > > > According to the documentation > > ( http://centralite.readthedocs.org/en/latest/devices/lights/usdimmer.html) > > it seems to me that the "Electrical Measurement" cluster is a Vendor > > specific cluster that does not belong to any ZigBee published standard (as > > far as could look on the ZigBee specification), can you correct me on this? > > > > Ciao, > > Stefano > > > > On Thu, Dec 4, 2014 at 8:19 PM, Ryan Press <[email protected]> wrote: > >> > >> Hi Stefano, > >> > >> Yes, thanks, I saw your other answer, and replied to it: > >> > >> http://zb4osgi.aaloa.org/pipermail/dev/2014-November/001061.html > >> > >> I know the server was down maybe some mail was lost. Thanks again, if > >> you have some information on the firmware that would be nice. > >> > >> Also I want to try it in Eclipse. I see there are some launch files > >> under zigbee.ha.driver. > >> > >> I am now going to try implementing "Electrical Measurement" cluster. > >> Here is (almost) my device: > >> http://centralite.readthedocs.org/en/latest/devices/lights/usdimmer.html > >> It should be straightforward to do this, I think. > >> > >> Thanks, > >> Ryan > >> > >> > >> On Tue, Dec 2, 2014 at 9:23 AM, Stefano Lenzi < [email protected]> > >> wrote: > >> > Hi Ryan, > >> > > >> > I thought that I answered to you, but considering that I was writing > >> > with my > >> > mobile something has gone wrong and my e-mail never reached you... > >> > Please look at my commet inline > >> > > >> > Ciao, > >> > Stefano > >> > > >> > Il 26/11/2014 17:26, Ryan Press ha scritto: > >> >> > >> >> Hi Francesco, > >> >> > >> >> Yes, it gets further now, thanks! But I see this error when it runs > >> >> the > >> >> tests: > >> >> > >> >> Tests run: 1, Failures: 1, Errors: 0, Skipped: 0, Time elapsed: 0.021 > >> >> sec <<< FAILURE! - in > >> >> it.cnr.isti.zigbee.basedriver.communication.AFLayerTest > >> >> > >> >> > >> >> getSendingEndpointZigBeeDeviceCluster(it.cnr.isti.zigbee.basedriver.communication.AFLayerTest) > >> >> Time elapsed: 0.021 sec <<< FAILURE! > >> >> java.lang.AssertionError: > >> >> Unexpected method call getProperty("it.cnr.isti.zigbee.pan.id"): > >> >> at > >> >> > >> >> org.easymock.internal.MockInvocationHandler.invoke(MockInvocationHandler.java:45) > >> >> at > >> >> > >> >> org.easymock.internal.ObjectMethodsFilter.invoke(ObjectMethodsFilter.java:73) > >> >> at com.sun.proxy.$Proxy5.getProperty(Unknown Source) > >> >> at > >> >> it.cnr.isti.osgi.util.OSGiProperties.getInt(OSGiProperties.java:131) > >> >> at > >> >> > >> >> it.cnr.isti.zigbee.basedriver.configuration.ConfigurationService.<init>(ConfigurationService.java:66) > >> >> at > >> >> > >> >> it.cnr.isti.zigbee.basedriver.api.test.ZigBeeBaseDriverTestUnitBase.<init>(ZigBeeBaseDriverTestUnitBase.java:75) > >> >> at > >> >> > >> >> it.cnr.isti.zigbee.basedriver.communication.AFLayerTest.<init>(AFLayerTest.java:67) > >> >> > >> >> Anyone have an idea with this one? > >> > > >> > > >> > I have to look as such Test Failure, but the best way for you is to > >> > build by > >> > skipping the test. Maven allows you to skip tests by addin -DskipTests > >> > as > >> > parameter, thus you have to execute the command > >> > mvn -DskipTests install > >> > instead of > >> > mvn install > >> > > >> > > >> > > >> >> > >> >> Thanks again, > >> >> Ryan > >> >> > >> >> > >> >> > >> >> On Wed, Nov 26, 2014 at 7:36 AM, Francesco Potortì > >> >> <[email protected]> > >> >> wrote: > >> >>>> > >> >>>> I'm trying to build zb4osgi, but for the past few days I get Error > >> >>>> 503 > >> >>>> when trying to access http://nexus.aaloa.org. Is this server down? > >> >>> > >> >>> It should be fixed now. Can you try again? > >> >>> > >> >>> -- > >> >>> Francesco Potortì (ricercatore) Voice: +39.050.621.3058 > >> >>> ISTI - Area della ricerca CNR Mobile: +39.348.8283.107 > >> >>> via G. Moruzzi 1, I-56124 Pisa Skype: wnlabisti > >> >>> (entrance 20, 1st floor, room C71) Web: http://fly.isti.cnr.it > >> >>> > >> >>> _______________________________________________ > >> >>> Dev mailing list > >> >>> [email protected] > >> >>> http://zb4osgi.aaloa.org/mailman/listinfo/dev > >> >> > >> >> _______________________________________________ > >> >> Dev mailing list > >> >> [email protected] > >> >> http://zb4osgi.aaloa.org/mailman/listinfo/dev > >> > > >> > > >> > > >> > -- > >> > Dr. Stefano Lenzi > >> > OSGi Invited Researcher > >> > Tel: +39 050 621 2844 > >> > Fax: +39 050 315 2811 > >> > Skype: kismet-sl > >> > Istituto di Scienza e Tecnologie dell’Informazione “A. Faedo” > >> > Consiglio Nazionale delle Ricerche > >> > Via Moruzzi, 1, 56124 - Pisa - Italy - Stanza C66 > >> > > >> > > >> > _______________________________________________ > >> > Dev mailing list > >> > [email protected] > >> > http://zb4osgi.aaloa.org/mailman/listinfo/dev > >> > > >> > >> _______________________________________________ > >> Dev mailing list > >> [email protected] > >> http://zb4osgi.aaloa.org/mailman/listinfo/dev > > > > > > > > _______________________________________________ > > Dev mailing list > > [email protected] > > http://zb4osgi.aaloa.org/mailman/listinfo/dev > > > > _______________________________________________ > Dev mailing list > [email protected] > http://zb4osgi.aaloa.org/mailman/listinfo/dev
_______________________________________________ Dev mailing list [email protected] http://zb4osgi.aaloa.org/mailman/listinfo/dev
