From: Lean Sheng Tan <sheng....@9elements.com>
Don't assume a 64bit register always holds an address greater than 4GB.
Check the value in the register and decide which Aperature it should be
assigned to.
Fixes assertion
"ASSERT [PciHostBridgeDxe] Bridge->MemAbove4G.Base >= 0x0000000100000000ULL".
Tested with coreboot as bootloader on platforms that have PCI resource
above 4GiB and on platforms that don't have resource above 4GiB.
Cc: Guo Dong <guo.d...@intel.com>
Cc: Ray Ni <ray...@intel.com>
Cc: Maurice Ma <maurice...@intel.com>
Cc: Benjamin You <benjamin....@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Signed-off-by: Patrick Rudolph <patrick.rudo...@9elements.com>
---
.../Library/PciHostBridgeLib/PciHostBridgeSupport.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/UefiPayloadPkg/Library/PciHostBridgeLib/PciHostBridgeSupport.c
b/UefiPayloadPkg/Library/PciHostBridgeLib/PciHostBridgeSupport.c
index 8a890b6b53..e1faa24ae7 100644
--- a/UefiPayloadPkg/Library/PciHostBridgeLib/PciHostBridgeSupport.c
+++ b/UefiPayloadPkg/Library/PciHostBridgeLib/PciHostBridgeSupport.c
@@ -354,14 +354,19 @@ ScanForRootBridges (
Base = ((UINT32)Pci.Bridge.PrefetchableMemoryBase & 0xfff0) << 16;
Limit = (((UINT32)Pci.Bridge.PrefetchableMemoryLimit & 0xfff0)
<< 16) | 0xfffff;
- MemAperture = &Mem;
+
if (Value == BIT0) {
- Base |= LShiftU64 (Pci.Bridge.PrefetchableBaseUpper32, 32);
- Limit |= LShiftU64 (Pci.Bridge.PrefetchableLimitUpper32, 32);
- MemAperture = &MemAbove4G;
+ Base |= LShiftU64 (Pci.Bridge.PrefetchableBaseUpper32, 32);
+ Limit |= LShiftU64 (Pci.Bridge.PrefetchableLimitUpper32, 32);
}
if ((Base > 0) && (Base < Limit)) {
+ if (Base < BASE_4GB) {
+ MemAperture = &Mem;
+ } else {
+ MemAperture = &MemAbove4G;
+ }
+
if (MemAperture->Base > Base) {
MemAperture->Base = Base;
}
--
2.32.0
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#88265): https://edk2.groups.io/g/devel/message/88265
Mute This Topic: https://groups.io/mt/90138164/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
