If the goal is to support a mix of graphical and serial consoles both with high
text resolutions, then your patch is appropriate.
It looks like you are observing some unexpected limitations in the OVMF console
management.
Perhaps the OVMF maintainers can provide some advice on how to configure OVMF
with serial consoles disabled.
Are you using QEMU to run OVMF? Are you including UARTs in QEMU launch?
Mike
> -----Original Message-----
> From: Konstantin Aladyshev <aladyshe...@gmail.com>
> Sent: Thursday, September 22, 2022 1:23 AM
> To: Kinney, Michael D <michael.d.kin...@intel.com>
> Cc: devel@edk2.groups.io; Gao, Liming <gaolim...@byosoft.com.cn>; Wang, Jian
> J <jian.j.w...@intel.com>; Ni, Ray
> <ray...@intel.com>
> Subject: Re: [edk2-devel] [PATCH] MdeModulePkg/TerminalDxe: add modes
>
> > Is the issue that you are trying to solve supporting larger serial console
> > modes or just wanting to use the largest possible
> text mode at a given graphics resolution?
>
> I spotted this issue when I wanted to use the largest possible text
> mode in UEFI shell at high graphics resolutions. Is it not enough
> reason for this commit?
>
> > The other way to get full screen text on the graphical console is to
> > disable the serial console in the Boot Maintenance
> Manager.
>
> Can you please elaborate this? I've tried to disable UART in "Boot
> Maintenance Manager -> Console Options" like this:
> ```
> Console Input Device Select:
> PciRoot(0x0)/Pci(0x1,0x0)/Acpi(PNP0303,0x0) [X]
> PciRoot(0x0)/Pci(0x1,0x0)/Serial(0x0)/Uart(115200,8,N,1) [ ]
>
> Console Output Device Select:
> PciRoot(0x0)/Pci(0x2,0x0)/AcpiAdr(0x80010100) [X]
> PciRoot(0x0)/Pci(0x1,0x0)/Serial(0x0)/Uart(115200,8,N,1) [ ]
>
> Console Standard Error Device Select:
> PciRoot(0x0)/Pci(0x2,0x0)/AcpiAdr(0x80010100) [X]
> PciRoot(0x0)/Pci(0x1,0x0)/Serial(0x0)/Uart(115200,8,N,1) [ ]
> ```
> But after reset, the console is 80x25 and all UART options are checked again.
>
> Also there is a menu "Boot Maintenance Manager -> Console Options ->
> Console Output Mode Select" that has "Set Console Output Mode", and it
> is always "80x25" without any options for me.
>
> Best regards,
> Konstantin Aladyshev
>
> On Wed, Sep 21, 2022 at 7:28 PM Kinney, Michael D
> <michael.d.kin...@intel.com> wrote:
> >
> > The other way to get full screen text on graphical console is to disable
> > the serial console
> > in the Boot Maintenance Manager.
> >
> > If the serial console is disabled then ConSplitterDxe will only see the
> > text modes supported
> > by GraphicsConsoleDxe which will include these higher text modes.
> >
> > Is the issue that you are trying to solve supporting larger serial console
> > modes or just
> > wanting to use the largest possible text mode at a given graphics
> > resolution?
> >
> > Mike
> >
> > > -----Original Message-----
> > > From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Konstantin
> > > Aladyshev
> > > Sent: Wednesday, September 21, 2022 1:24 AM
> > > To: Kinney, Michael D <michael.d.kin...@intel.com>
> > > Cc: devel@edk2.groups.io; Gao, Liming <gaolim...@byosoft.com.cn>; Wang,
> > > Jian J <jian.j.w...@intel.com>; Ni, Ray
> > > <ray...@intel.com>
> > > Subject: Re: [edk2-devel] [PATCH] MdeModulePkg/TerminalDxe: add modes
> > >
> > > I have tested it in the following way:
> > > - launch OVMF in Linux and connect with vnc
> > > - change resolution via the form browser (Device Manager -> OVMF
> > > Platform Configuration) from the default 640x480 to the 1920x1080
> > > - "reset"
> > > - after the reset the system will boot to the 1920x1080 resolution and
> > > text mode 80x25
> > > - check "mode" command output
> > >
> > > Before the commit this command displays only these modes:
> > > ```
> > > Shell> mode
> > > Available modes for console output device.
> > > Col 80 Row 25 *
> > > Col 80 Row 50
> > > Col 100 Row 31
> > > ```
> > > But with this commit the high resolution modes are present in the output:
> > > ```
> > > Shell> mode
> > > Available modes for console output device.
> > > Col 80 Row 25 *
> > > Col 80 Row 50
> > > Col 100 Row 31
> > > Col 128 Row 40
> > > Col 160 Row 42
> > > Col 240 Row 56
> > > ```
> > > And in my case setting the appropriate "mode 240 56" at runtime works
> > > just fine:
> > > ```
> > > Shell> mode 240 56
> > > ```
> > > After that the text output starts using the full screen.
> > >
> > > Best regards,
> > > Konstantin Aladyshev
> > >
> > > On Wed, Sep 21, 2022 at 4:46 AM Kinney, Michael D
> > > <michael.d.kin...@intel.com> wrote:
> > > >
> > > > Tera Term works.
> > > >
> > > > Mike
> > > >
> > > > > -----Original Message-----
> > > > > From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of
> > > > > gaoliming via groups.io
> > > > > Sent: Tuesday, September 20, 2022 6:26 PM
> > > > > To: Kinney, Michael D <michael.d.kin...@intel.com>;
> > > > > devel@edk2.groups.io; aladyshe...@gmail.com
> > > > > Cc: Wang, Jian J <jian.j.w...@intel.com>; Ni, Ray <ray...@intel.com>
> > > > > Subject: 回复: [edk2-devel] [PATCH] MdeModulePkg/TerminalDxe: add modes
> > > > >
> > > > > Konstantin:
> > > > > Do you try the terminal software (such as Putty) to display the
> > > > > text mode 160, 42 or 240, 56?
> > > > > I try Putty in my desktop. It can't display 240 * 56 in one screen.
> > > > >
> > > > > Thanks
> > > > > Liming
> > > > > > -----邮件原件-----
> > > > > > 发件人: Kinney, Michael D <michael.d.kin...@intel.com>
> > > > > > 发送时间: 2022年9月20日 5:02
> > > > > > 收件人: devel@edk2.groups.io; aladyshe...@gmail.com; Kinney, Michael D
> > > > > > <michael.d.kin...@intel.com>
> > > > > > 抄送: Wang, Jian J <jian.j.w...@intel.com>; Gao, Liming
> > > > > > <gaolim...@byosoft.com.cn>; Ni, Ray <ray...@intel.com>
> > > > > > 主题: RE: [edk2-devel] [PATCH] MdeModulePkg/TerminalDxe: add modes
> > > > > >
> > > > > > This looks like a reasonable update to support platforms that have
> > > > > > both
> > > > > > graphical consoles and serial consoles.
> > > > > >
> > > > > > Reviewed-by: Michael D Kinney <michael.d.kin...@intel.com>
> > > > > >
> > > > > >
> > > > > > > -----Original Message-----
> > > > > > > From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of
> > > > > > Konstantin Aladyshev
> > > > > > > Sent: Monday, September 19, 2022 1:57 AM
> > > > > > > To: devel@edk2.groups.io
> > > > > > > Cc: Wang, Jian J <jian.j.w...@intel.com>; Gao, Liming
> > > > > > <gaolim...@byosoft.com.cn>; Ni, Ray <ray...@intel.com>; Konstantin
> > > > > > > Aladyshev <aladyshe...@gmail.com>
> > > > > > > Subject: [edk2-devel] [PATCH] MdeModulePkg/TerminalDxe: add modes
> > > > > > >
> > > > > > > The commit b807174fecacf4c9f8400cab4d6fb3f580284021
> > > > > > > ("MdeModulePkg/GraphicsConsoleDxe: add modes") has added modes for
> > > > > > the
> > > > > > > high display resolutions. Support these modes in the TerminalDxe
> > > > > > > as
> > > > > > > well, so it would be possible to select the text mode that would
> > > > > > > take
> > > > > > > all the available screen space.
> > > > > > >
> > > > > > > Signed-off-by: Konstantin Aladyshev <aladyshe...@gmail.com>
> > > > > > > ---
> > > > > > > MdeModulePkg/Universal/Console/TerminalDxe/Terminal.c | 3 +++
> > > > > > > 1 file changed, 3 insertions(+)
> > > > > > >
> > > > > > > diff --git a/MdeModulePkg/Universal/Console/TerminalDxe/Terminal.c
> > > > > > b/MdeModulePkg/Universal/Console/TerminalDxe/Terminal.c
> > > > > > > index e2d779c783..6b7b970516 100644
> > > > > > > --- a/MdeModulePkg/Universal/Console/TerminalDxe/Terminal.c
> > > > > > > +++ b/MdeModulePkg/Universal/Console/TerminalDxe/Terminal.c
> > > > > > > @@ -115,6 +115,9 @@ TERMINAL_CONSOLE_MODE_DATA
> > > > > > mTerminalConsoleModeData[] = {
> > > > > > > { 80, 25 },
> > > > > > >
> > > > > > > { 80, 50 },
> > > > > > >
> > > > > > > { 100, 31 },
> > > > > > >
> > > > > > > + { 128, 40 },
> > > > > > >
> > > > > > > + { 160, 42 },
> > > > > > >
> > > > > > > + { 240, 56 },
> > > > > > >
> > > > > > > //
> > > > > > >
> > > > > > > // New modes can be added here.
> > > > > > >
> > > > > > > //
> > > > > > >
> > > > > > > --
> > > > > > > 2.25.1
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > -=-=-=-=-=-=
> > > > > > > Groups.io Links: You receive all messages sent to this group.
> > > > > > > View/Reply Online (#93935):
> > > > > > https://edk2.groups.io/g/devel/message/93935
> > > > > > > Mute This Topic: https://groups.io/mt/93777396/1643496
> > > > > > > Group Owner: devel+ow...@edk2.groups.io
> > > > > > > Unsubscribe: https://edk2.groups.io/g/devel/unsub
> > > > > > [michael.d.kin...@intel.com]
> > > > > > > -=-=-=-=-=-=
> > > > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > >
> > >
> > >
> > >
> >
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#94121): https://edk2.groups.io/g/devel/message/94121
Mute This Topic: https://groups.io/mt/93818606/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
