As an alternative to Alexei's link below you might want to check out: http://www.moxa.com/product/intellio/C320.htm
Works like a charm on any linux platform. cheers, Frederik Ammitzbøll Unwire Vestergade 12A, 3. 1456 København K Denmark Tlf.: +45 33 33 08 70 Mobil: +45 27 11 99 99 Fax : +45 33 33 09 70 Web: www.unwire.dk > Just FYI, we currently run AT2 module from lastest CVS with 8(!) siemens > m20T devices connected on same machine and we use them for both > incoming and > outgoing traffic. > System is stable, and works smooth. > > If you wonder how one connected 8 serial devices to a PC, check this : > http://www.ionetworks.com/products/edgeport.html > > > ----- Original Message ----- > From: "Stipe Tolj" <[EMAIL PROTECTED]> > To: "idowu oduntan" <[EMAIL PROTECTED]> > Cc: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>; > <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> > Sent: Tuesday, October 30, 2001 10:47 AM > Subject: Re: For your kind attention! > > > > I am presently setting up Kannel to run as an SMS > > gateway using compiled version of 1.0.3. I am using a > > siemens GSM modem as the SMSC. > > > > With my present configurations, I can send messages > > through my smsc from the admin html console via a > > browser. But messages sent to me are not received and > > no indications of these are made in any form, even in > > the logs. > > If you are running an "older firmware version on your Siemens M20 then > this may be the cause. Please search the mailing list archive for an > update location someone posted recently, where you can get the update > for the firmware software. > > Anyway, 1.0.3 is quite old, considered in terms of smsc_at.c (the GSM > modem SMSC implementation). You should be using a CVS snapshot > instead. Unfortunatly we currently don't have any "latest" stable > release, so CVS is appropriate for now. > > > I am not receiving messages via the smsc. Is there a > > specific receive-thread that must be started before > > messages can be recieved? > > No, bearerbox is responsible for serial com communication and smsbox > for the processing. > > > Does the bearerbox listen continuosly to the smsc and > > is there a way I can dictate the frequency at which > > the bearerbox retrieves messages from the smsc(phone > > modem). > > No, bearerbox does (or should :)) listen continously for incomding > messages. > > Can you send as much messages as you want via the SMSC, but don't > receive any? Or may it be that you send a couple of messages, the SMSC > connection drops and you try to receive and wonder why it does not > come? > > Anyway, a bearerbox and smsbox log (not to heavy please :)) would be > best for the list to review what you are trying. > > Stipe > > [EMAIL PROTECTED] > ------------------------------------------------------------------- > Wapme Systems AG > > Münsterstr. 248 > 40470 Düsseldorf > > Tel: +49-211-74845-0 > Fax: +49-211-74845-299 > > E-Mail: [EMAIL PROTECTED] > Internet: http://www.wapme-systems.de > ------------------------------------------------------------------- > wapme.net - wherever you are > > >