Yes should do that too quite happily. I'm using to coax a limited capacity device into working however it will work quite normally with any CMTI message received.
Cheers. Alex On Tue, 30 Apr 2002, Andrea Viscovich wrote: > > > > Patch attached to add CMTI support to the AT2 driver. You'll need to add a > > new definition to your configuration file specifying that the init string > > for the phones you want to use this is AT+CNMI=1,1,0,0,0 rather than > > 1,2,0,0,0 and then define your smsc. > > I don't understand. I think it can be used even with AT+CNMI=1,2,0,0,0 > In this case only few sms will go throught sim, that's why we > need to check the +CMTI > Otherwise with AT+CNMI=1,1,0,0,0 every sms will go throught sim. > By the way thanks :-) > Andrea > -- Alex Judd http://www.skywire.co.uk