Hello Mrs! :-) See this document:
http://www.siemens-mobile.de/btob/external/downloads/WM/Faqs_e.pdf In section about SMS, exists references for this error "CMS ERROR 500". Att., []īs++ Alberto Fabiano Caires de Medeiros [EMAIL PROTECTED] -----Mensagem original----- Avner Sternheim Subject:RE: send data message with Siemens M20 ERROR 500 Date:24/09/2002 11:54 Mailing-list:kannel-devel Message-ID:<[EMAIL PROTECTED] > Is there no other way to send data messages ? -----Original Message----- From: Oded Arbel [mailto:[EMAIL PROTECTED]] Sent: Tuesday, September 24, 2002 10:40 AM To: Avner Sternheim; [EMAIL PROTECTED] Subject: RE: send data message with Siemens M20 ERROR 500 I've seen this problem too, and I think that this is a modem specific problem - I have no problem sending the exact same data on another type of modem. I have yet to find a workaround. -- Oded Arbel m-Wise mobile solutions [EMAIL PROTECTED] +972-9-9581711 (116) +972-67-340014 ::.. "The difference between fiction and reality? Fiction has to make sense." -- Tom Clancy > -----Original Message----- > From: Avner Sternheim [mailto:[EMAIL PROTECTED]] > Sent: Tuesday, September 24, 2002 11:36 AM > To: '[EMAIL PROTECTED]' > Subject: send data message with Siemens M20 ERROR 500 > > > Hi all, > > When I tried to send 8bit messages from the kannel via M20 > modem and set the > conding to 8bit (coding=2) > I got the following error, what is the problem ? and how it > can be fixed ? > > 2002-09-24 11:28:48 [6] DEBUG: AT2[/dev/ttyS1]: --> > 001100098150444640F70004A703FF00FF > 2002-09-24 11:28:48 [6] DEBUG: AT2[/dev/ttyS1]: --> ^Z > 2002-09-24 11:28:53 [6] DEBUG: AT2[/dev/ttyS1]: <-- > > 2002-09-24 11:28:53 [6] DEBUG: AT2[/dev/ttyS1]: <-- +CMS ERROR: 500 > 2002-09-24 11:28:53 [6] ERROR: AT2[/dev/ttyS1]: CMS ERROR: > +CMS ERROR: 500 > 2002-09-24 11:28:53 [6] DEBUG: AT2[/dev/ttyS1]: send command > status: 1 > 2002-09-24 11:28:53 [1] DEBUG: Dumping 0 messages and 0 acks to store > > >