On Mon, Aug 22, 2011 at 09:54:48PM +1000, fors...@ozonline.com.au wrote: > Got it unbricked ok and installed os36
Good. > Does it need the mod where you put tape on the heat spreader near the > power jack? http://wiki.laptop.org/go/XO_1.75_B1#Possibility_of_Shorting_Vin My opinion is that you should do this modification if you plan to test with a child, or plan to risk applying force to the back panel, e.g. carrying the laptop unprotected in a personal luggage bag. > There is a thread on the heat spreader, are there any precautions to > refit it ok? Try not to remove it unless you must. On the XO-1.75 the heat budget is much cooler, so it is not as critical, but hey, you're in a hot country. The XO-1.75 heat spreader should have an additional mounting point on a limb, so make sure you screw that one down too. I don't yet know if you need to remove the heat spreader to place the insulating tape. > Fails on restart, need then to reboot. #11153, please test again once this ticket asks or is closed. -- James Cameron http://quozl.linux.org.au/ _______________________________________________ Devel mailing list Devel@lists.laptop.org http://lists.laptop.org/listinfo/devel