Hi, On 11/26/2013 01:03 PM, Adrian Byszuk wrote: > However, with no luck so far. Are the instructions at wiki complete? > Particularly, what about this TFTP server that is mentioned? Shouldn't I > upload some additional firmware via netboot?
The board will download that firmware from the TFTP server, both at power-up and later if you enter "netboot" at the BIOS prompt (in case the first attempt failed). You can find it as "videomixer.bin" in the mixxeo_binaries_1.tar.bz2 archive I sent to Greg, rename it to boot.bin and place it at the root of the TFTP server. What do you see on the serial console? Open a serial terminal program such as GtkTerm on /dev/ttyUSB0 with 115200bps 8-N-1 communication parameters. > I've succesfully flashed the SoC and BIOS with command 'm1nor-ng > soc-mixxeo.fpg bios.bin'. HPD pin stays low. Yes, this is expected, and the videomixer.bin firmware should drive them high. Regards, Sebastien _______________________________________________ Devel mailing list Devel@lists.milkymist.org https://ssl.serverraum.org/lists/listinfo/devel
