You need to rm -rf ompi/contrib/vt and then svn up again - it's a stale .deps directory entry
On Jul 22, 2014, at 10:15 AM, Dave Goodell (dgoodell) <dgood...@cisco.com> wrote: > FYI, this causes build failures in OTF code in our Jenkins installation. > It's probably caused by this commit: > > https://svn.open-mpi.org/trac/ompi/changeset/32265 > > I don't have time to track it down myself, unfortunately. > > -Dave > > Begin forwarded message: > >> From: <dgood...@cisco.com> >> Subject: Build failed in Jenkins: ompi_upstream_v1.8_build_debug #265 >> Date: July 22, 2014 12:08:34 PM CDT >> To: <usnic-jenk...@cisco.com> >> >> See >> <https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/265/changes> >> >> Changes: >> >> [rhc] Fixes #4799: Move r32261 to v1.8 branch (Improve verbose message for >> which devices are being used) >> >> ---svn-pre-commit-ignore-below--- >> >> r32261 [[BR]] >> Improve verbose message which says which device:ports are being used. Also >> move where message is generated. >> >> [rhc] Fixes #4798: Move r32260 to v1.8 branch (common/verbs: fix usnic >> detection) >> >> ---svn-pre-commit-ignore-below--- >> >> r32260 [[BR]] >> common/verbs: fix usnic detection >> >> The logic was mishandling the case of a newer kernel and an older >> libusnic_verbs. Simplify usnic_transport() to return constants in the >> 2 known cases (not a usNIC device and the TRANSPORT_USNIC_UDP case), >> and call the magic probe in all other cases. >> >> Reviewed-by: Dave Goodell <dgood...@cisco.com> >> >> cmr=v1.8.2:reviewer=ompi-rm1.8 >> >> [rhc] Fixes #4797: Move r32259 to v1.8 branch (usnic: explicitly handle case >> when) >> >> ---svn-pre-commit-ignore-below--- >> >> r32259 [[BR]] >> usnic: explicitly handle case when both endpoints are NULL >> >> If we don't explicitly declare that (a == NULL && b == NULL) is >> equivalent to qsort, we could end up with wonky sorting order. I.e., >> it's *possible* that some NULLs could end up in the middle of the >> array. >> >> Regardless of whether it will ever happen in practice, it makes the >> code more clear to also handle the "both are NULL" case. >> >> Also fix the 2-spacing indents. >> >> Reviewed by Dave Goodell. >> >> cmr=v1.8.2:reviewer=ompi-rm1.8 >> >> [rhc] Fixes #4795: Move r32257 to v1.8 branch (OSHMEM: Set >> SMA_SYMMETRIC_SIZE to default) >> >> ---svn-pre-commit-ignore-below--- >> >> r32257 [[BR]] >> OSHMEM: Set SMA_SYMMETRIC_SIZE to default value >> >> OpenSHMEMspec 1.1 introduces a set of environment variables that allows >> users to configure the Open-SHMEM implementation, and receive information >> about the implementation. >> - Add SMA_SYMMETRIC_SIZE - number of bytes to allocate for symmetric heap >> - SHMEM_SYMMETRIC_HEAP_SIZE (Mellanox extension) is used by a user to >> provide a size of symmetric area. This change sets this env variable in case >> a user does not set this variable >> directly. >> >> fixed by Igor, reviewed by Miked >> >> cmr=v1.8.2:reviwer=ompi-rm1.8 >> >> [rhc] Fixes #4794: Move r32256 to v1.8 branch (MXM: use builk connection >> establishment) >> >> ---svn-pre-commit-ignore-below--- >> >> r32256 [[BR]] >> MXM: use builk connection establishment API >> >> fixed by Vasily, reviewed by Yossi/Miked >> >> cmr=v1.8.2:reviwer=ompi-rm1.8 >> >> [rhc] Fixes #4793: Move r32253 to v1.8 branch (configure.ac: use the >> portable '=') >> >> ---svn-pre-commit-ignore-below--- >> >> r32253 [[BR]] >> configure.ac: use the portable '=' operator for the 'test' command >> >> Thanks to Kevin M. Buckley for providing the patch >> >> cmr=v1.8.2:reviewer=rhc >> >> [rhc] Fixes #4791: Move r32245 to v1.8 branch (oshmem: remove automatically >> generated files) >> >> ---svn-pre-commit-ignore-below--- >> >> r32245 [[BR]] >> oshmem: remove automatically generated files from the tarball >> >> cmr=v1.8.2:reviewer=miked >> >> [rhc] Fixes #4790: Move r32244 to v1.8 branch (mpi: remove automatically >> generated file) >> >> ---svn-pre-commit-ignore-below--- >> >> r32244 [[BR]] >> mpi: remove automatically generated file from the tarball >> >> cmr=v1.8.2:reviewer=jsquyres >> >> [rhc] Fixes #4789: Move r32243 to v1.8 branch (vt: remove automatically >> generated files) >> >> ---svn-pre-commit-ignore-below--- >> >> r32243 [[BR]] >> vt: remove automatically generated files from the tarball >> >> cmr=v1.8.2:reviewer=jurenz >> >> [rhc] Fixes #4788: Move r32231 to v1.8 branch (Silence warning) >> >> ---svn-pre-commit-ignore-below--- >> >> r32231 [[BR]] >> Silence warning >> >> cmr=v1.8.2:reviewer=hjelmn >> >> [rhc] Fixes #4786: Move r29732 to v1.8 branch (BUILD: support new automake) >> >> ---svn-pre-commit-ignore-below--- >> >> r29732 [[BR]] >> Changes to VT/OTF: >> Fixed warnings about the need of the 'subdir-objects' option when using >> Automake v1.14. >> Due to a bug in Automake (see >> http://debbugs.gnu.org/cgi/bugreport.cgi?bug=13928) the 'subdir-objects' >> option cannot be enabled. >> To get around this problem external sources files are sym linked in the >> current build directory (as done in ompi/mpi/c/profile) to lead Automake to >> believe that all source files are in the same directory. >> >> ------------------------------------------ >> [...truncated 10830 lines...] >> CC prget_f.lo >> CC pget_accumulate_f.lo >> CC prget_accumulate_f.lo >> CC pput_f.lo >> CC prput_f.lo >> CC pcompare_and_swap_f.lo >> CC pfetch_and_op_f.lo >> CC pwin_allocate_shared_f.lo >> CC pwin_call_errhandler_f.lo >> CC pwin_complete_f.lo >> CC pwin_create_errhandler_f.lo >> CC pwin_create_f.lo >> CC pwin_create_keyval_f.lo >> CC pwin_delete_attr_f.lo >> CC pwin_fence_f.lo >> CC pwin_free_f.lo >> CC pwin_free_keyval_f.lo >> CC pwin_get_attr_f.lo >> CC pwin_get_errhandler_f.lo >> CC pwin_get_group_f.lo >> CC pwin_get_name_f.lo >> CC pwin_lock_f.lo >> CC pwin_post_f.lo >> CC pwin_set_attr_f.lo >> CC pwin_set_errhandler_f.lo >> CC pwin_set_name_f.lo >> CC pwin_shared_query_f.lo >> CC pwin_start_f.lo >> CC pwin_test_f.lo >> CC pwin_unlock_f.lo >> CC pwin_wait_f.lo >> CC pwin_flush_f.lo >> CC pwin_flush_all_f.lo >> CC pwin_flush_local_f.lo >> CC pwin_flush_local_all_f.lo >> CC pfile_call_errhandler_f.lo >> CC pfile_close_f.lo >> CC pfile_create_errhandler_f.lo >> CC pfile_delete_f.lo >> CC pfile_get_amode_f.lo >> CC pfile_get_atomicity_f.lo >> CC pfile_get_byte_offset_f.lo >> CC pfile_get_errhandler_f.lo >> CC pfile_get_group_f.lo >> CC pfile_get_info_f.lo >> CC pfile_get_position_f.lo >> CC pfile_get_position_shared_f.lo >> CC pfile_get_size_f.lo >> CC pfile_get_type_extent_f.lo >> CC pfile_get_view_f.lo >> CC pfile_iread_at_f.lo >> CC pfile_iread_f.lo >> CC pfile_iread_shared_f.lo >> CC pfile_iwrite_at_f.lo >> CC pfile_iwrite_f.lo >> CC pfile_iwrite_shared_f.lo >> CC pfile_open_f.lo >> CC pfile_preallocate_f.lo >> CC pfile_read_all_begin_f.lo >> CC pfile_read_all_end_f.lo >> CC pfile_read_all_f.lo >> CC pfile_read_at_all_begin_f.lo >> CC pfile_read_at_all_end_f.lo >> CC pfile_read_at_all_f.lo >> CC pfile_read_at_f.lo >> CC pfile_read_f.lo >> CC pfile_read_ordered_begin_f.lo >> CC pfile_read_ordered_end_f.lo >> CC pfile_read_ordered_f.lo >> CC pfile_read_shared_f.lo >> CC pfile_seek_f.lo >> CC pfile_seek_shared_f.lo >> CC pfile_set_atomicity_f.lo >> CC pfile_set_errhandler_f.lo >> CC pfile_set_info_f.lo >> CC pfile_set_size_f.lo >> CC pfile_set_view_f.lo >> CC pfile_sync_f.lo >> CC pfile_write_all_begin_f.lo >> CC pfile_write_all_end_f.lo >> CC pfile_write_all_f.lo >> CC pfile_write_at_all_begin_f.lo >> CC pfile_write_at_all_end_f.lo >> CC pfile_write_at_all_f.lo >> CC pfile_write_at_f.lo >> CC pfile_write_f.lo >> CC pfile_write_ordered_begin_f.lo >> CC pfile_write_ordered_end_f.lo >> CC pfile_write_ordered_f.lo >> CC pfile_write_shared_f.lo >> CC pregister_datarep_f.lo >> CCLD libmpi_mpifh_pmpi.la >> make[3]: Leaving directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/mpi/fortran/mpif-h/profile'> >> make[3]: Entering directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/mpi/fortran/mpif-h'> >> CCLD libmpi_mpifh.la >> make[3]: Leaving directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/mpi/fortran/mpif-h'> >> make[2]: Leaving directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/mpi/fortran/mpif-h'> >> Making all in mpi/fortran/use-mpi-tkr >> make[2]: Entering directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/mpi/fortran/use-mpi-tkr'> >> PPFC mpi.lo >> FCLD libmpi_usempi.la >> make[2]: Leaving directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/mpi/fortran/use-mpi-tkr'> >> Making all in mpi/fortran/mpiext >> make[2]: Entering directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/mpi/fortran/mpiext'> >> make[2]: Nothing to be done for `all'. >> make[2]: Leaving directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/mpi/fortran/mpiext'> >> Making all in contrib/vt >> make[2]: Entering directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt'> >> Making all in vt >> make[3]: Entering directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt'> >> /usr/bin/make all-recursive >> make[4]: Entering directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt'> >> Making all in extlib >> make[5]: Entering directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib'> >> Making all in otf >> make[6]: Entering directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf'> >> /usr/bin/make all-recursive >> make[7]: Entering directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf'> >> Making all in vendor/jenkins_hash >> make[8]: Entering directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/vendor/jenkins_hash'> >> CC libjenkins_hash_la-jenkins_hash.lo >> CCLD libjenkins_hash.la >> make[8]: Leaving directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/vendor/jenkins_hash'> >> Making all in otflib >> make[8]: Entering directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/otflib'> >> CC libopen_trace_format_la-OTF_CopyHandler.lo >> CC libopen_trace_format_la-OTF_CopyHandler_stream.lo >> CC libopen_trace_format_la-OTF_File.lo >> CC libopen_trace_format_la-OTF_File_iofsl.lo >> CC libopen_trace_format_la-OTF_FileManager.lo >> CC libopen_trace_format_la-OTF_Filenames.lo >> CC libopen_trace_format_la-OTF_HandlerArray.lo >> CC libopen_trace_format_la-OTF_KeyValue.lo >> CC libopen_trace_format_la-OTF_MasterControl.lo >> CC libopen_trace_format_la-OTF_Parse.lo >> CC libopen_trace_format_la-OTF_RBuffer.lo >> CC libopen_trace_format_la-OTF_Reader.lo >> CC libopen_trace_format_la-OTF_RStream.lo >> CC libopen_trace_format_la-OTF_WBuffer.lo >> CC libopen_trace_format_la-OTF_Writer.lo >> CC libopen_trace_format_la-OTF_WStream.lo >> CC libopen_trace_format_la-OTF_inttypes.lo >> CCLD libopen-trace-format.la >> make[8]: Leaving directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/otflib'> >> Making all in otfauxlib >> make[8]: Entering directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/otfauxlib'> >> CC libotfaux_la-OTFAUX_MsgMatching.lo >> CC libotfaux_la-OTFAUX_Thumbnail.lo >> CC libotfaux_la-OTFAUX_Process.lo >> CC libotfaux_la-OTFAUX_State.lo >> CCLD libotfaux.la >> make[8]: Leaving directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/otfauxlib'> >> Making all in tools >> make[8]: Entering directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/tools'> >> Making all in otfaux >> make[9]: Entering directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/tools/otfaux'> >> CXX otfaux.o >> CXX Control.o >> CXX Handler.o >> CXX Stats.o >> CXXLD otfaux >> make[9]: Leaving directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/tools/otfaux'> >> Making all in otfconfig >> make[9]: Entering directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/tools/otfconfig'> >> CC otfconfig.o >> CCLD otfconfig >> make[9]: Leaving directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/tools/otfconfig'> >> Making all in otfdump >> make[9]: Entering directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/tools/otfdump'> >> CXX Handler.o >> CXX otfdump.o >> CXXLD otfprint >> make[9]: Leaving directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/tools/otfdump'> >> Making all in otfinfo >> make[9]: Entering directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/tools/otfinfo'> >> CC handler.o >> CC hash.o >> CC otfinfo.o >> CCLD otfinfo >> make[9]: Leaving directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/tools/otfinfo'> >> Making all in otfmerge >> make[9]: Entering directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/tools/otfmerge'> >> Making all in . >> make[10]: Entering directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/tools/otfmerge'> >> CC otfmerge-handler.o >> CC otfmerge-otfmerge.o >> CCLD otfmerge >> make[10]: Leaving directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/tools/otfmerge'> >> Making all in mpi >> make[10]: Entering directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/tools/otfmerge/mpi'> >> ln -s ../../../tools/otfmerge/handler.c handler.c >> ln -s ../../../tools/otfmerge/otfmerge.c otfmerge.c >> CC otfmerge_mpi-handler.o >> CC otfmerge_mpi-otfmerge.o >> CCLD otfmerge-mpi >> make[10]: Leaving directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/tools/otfmerge/mpi'> >> make[9]: Leaving directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/tools/otfmerge'> >> Making all in otfprofile >> make[9]: Entering directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/tools/otfprofile'> >> Making all in . >> make[10]: Entering directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/tools/otfprofile'> >> CXX otfprofile-clustering.o >> CXX otfprofile-collect_data.o >> CXX otfprofile-collect_dispersion.o >> CXX otfprofile-comparison_clinkage.o >> CXX otfprofile-comparison_kmeans.o >> CXX otfprofile-create_csv.o >> CXX otfprofile-create_marker.o >> CXX otfprofile-create_latex.o >> CXX otfprofile-create_filter.o >> CXX otfprofile-otfprofile.o >> CXX otfprofile-process_dispersion.o >> CXX otfprofile-summarize_data.o >> CXXLD otfprofile >> make[10]: Leaving directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/tools/otfprofile'> >> Making all in mpi >> make[10]: Entering directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/tools/otfprofile/mpi'> >> make[10]: Leaving directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/tools/otfprofile/mpi'> >> make[10]: *** No rule to make target `../reduce_data.cpp', needed by >> `otfprofile_mpi-reduce_data.o'. Stop. >> make[9]: *** [all-recursive] Error 1 >> make[9]: Leaving directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/tools/otfprofile'> >> make[8]: *** [all-recursive] Error 1 >> make[8]: Leaving directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/tools'> >> make[7]: Leaving directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf'> >> make[7]: *** [all-recursive] Error 1 >> make[6]: *** [all] Error 2 >> make[6]: Leaving directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf'> >> make[5]: *** [all-recursive] Error 1 >> make[5]: Leaving directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib'> >> make[4]: *** [all-recursive] Error 1 >> make[4]: Leaving directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt'> >> make[3]: *** [all] Error 2 >> make[3]: Leaving directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt'> >> make[2]: *** [all-recursive] Error 1 >> make[2]: Leaving directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt'> >> make[1]: *** [all-recursive] Error 1 >> make[1]: Leaving directory >> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi'> >> make: *** [all-recursive] Error 1 >> srun: error: mpi001: task 0: Exited with exit code 2 >> +/home/dgoodell/git/savbu-usnic-cluster/jenkins/jenkins-build-ompi.zsh:36> >> check_status >> +check_status:1> eval return 2 >> +(eval):1> return 2 >> salloc: Relinquishing job allocation 824885 >> +/home/dgoodell/git/savbu-usnic-cluster/jenkins/jenkins-submit.zsh:59> >> salloc_status=2 >> +/home/dgoodell/git/savbu-usnic-cluster/jenkins/jenkins-submit.zsh:61> grep >> 'salloc: error: Failed to allocate resources: More processors requested than >> permitted' salloc_err.out >> +/home/dgoodell/git/savbu-usnic-cluster/jenkins/jenkins-submit.zsh:65> rm -f >> salloc_err.out >> +/home/dgoodell/git/savbu-usnic-cluster/jenkins/jenkins-submit.zsh:66> >> return 2 >> Build step 'Execute shell' marked build as failure >> Archiving artifacts > > _______________________________________________ > devel mailing list > de...@open-mpi.org > Subscription: http://www.open-mpi.org/mailman/listinfo.cgi/devel > Link to this post: > http://www.open-mpi.org/community/lists/devel/2014/07/15210.php
