Thanks, that did the trick. I didn't think that could be an issue here, but I forgot this build comes from SVN and not git, so it didn't have the "git clean" step run from my normal build script. I'll see if I can tweak the Jenkins settings so this doesn't happen again.
-Dave On Jul 22, 2014, at 12:20 PM, Ralph Castain <r...@open-mpi.org> wrote: > You need to rm -rf ompi/contrib/vt and then svn up again - it's a stale .deps > directory entry > > On Jul 22, 2014, at 10:15 AM, Dave Goodell (dgoodell) <dgood...@cisco.com> > wrote: > >> FYI, this causes build failures in OTF code in our Jenkins installation. >> It's probably caused by this commit: >> >> https://svn.open-mpi.org/trac/ompi/changeset/32265 >> >> I don't have time to track it down myself, unfortunately. >> >> -Dave >> >> Begin forwarded message: >> >>> From: <dgood...@cisco.com> >>> Subject: Build failed in Jenkins: ompi_upstream_v1.8_build_debug #265 >>> Date: July 22, 2014 12:08:34 PM CDT >>> To: <usnic-jenk...@cisco.com> >>> >>> See >>> <https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/265/changes> >>> >>> Changes: >>> >>> [rhc] Fixes #4799: Move r32261 to v1.8 branch (Improve verbose message for >>> which devices are being used) >>> >>> ---svn-pre-commit-ignore-below--- >>> >>> r32261 [[BR]] >>> Improve verbose message which says which device:ports are being used. Also >>> move where message is generated. >>> >>> [rhc] Fixes #4798: Move r32260 to v1.8 branch (common/verbs: fix usnic >>> detection) >>> >>> ---svn-pre-commit-ignore-below--- >>> >>> r32260 [[BR]] >>> common/verbs: fix usnic detection >>> >>> The logic was mishandling the case of a newer kernel and an older >>> libusnic_verbs. Simplify usnic_transport() to return constants in the >>> 2 known cases (not a usNIC device and the TRANSPORT_USNIC_UDP case), >>> and call the magic probe in all other cases. >>> >>> Reviewed-by: Dave Goodell <dgood...@cisco.com> >>> >>> cmr=v1.8.2:reviewer=ompi-rm1.8 >>> >>> [rhc] Fixes #4797: Move r32259 to v1.8 branch (usnic: explicitly handle >>> case when) >>> >>> ---svn-pre-commit-ignore-below--- >>> >>> r32259 [[BR]] >>> usnic: explicitly handle case when both endpoints are NULL >>> >>> If we don't explicitly declare that (a == NULL && b == NULL) is >>> equivalent to qsort, we could end up with wonky sorting order. I.e., >>> it's *possible* that some NULLs could end up in the middle of the >>> array. >>> >>> Regardless of whether it will ever happen in practice, it makes the >>> code more clear to also handle the "both are NULL" case. >>> >>> Also fix the 2-spacing indents. >>> >>> Reviewed by Dave Goodell. >>> >>> cmr=v1.8.2:reviewer=ompi-rm1.8 >>> >>> [rhc] Fixes #4795: Move r32257 to v1.8 branch (OSHMEM: Set >>> SMA_SYMMETRIC_SIZE to default) >>> >>> ---svn-pre-commit-ignore-below--- >>> >>> r32257 [[BR]] >>> OSHMEM: Set SMA_SYMMETRIC_SIZE to default value >>> >>> OpenSHMEMspec 1.1 introduces a set of environment variables that allows >>> users to configure the Open-SHMEM implementation, and receive information >>> about the implementation. >>> - Add SMA_SYMMETRIC_SIZE - number of bytes to allocate for symmetric heap >>> - SHMEM_SYMMETRIC_HEAP_SIZE (Mellanox extension) is used by a user to >>> provide a size of symmetric area. This change sets this env variable in >>> case a user does not set this variable >>> directly. >>> >>> fixed by Igor, reviewed by Miked >>> >>> cmr=v1.8.2:reviwer=ompi-rm1.8 >>> >>> [rhc] Fixes #4794: Move r32256 to v1.8 branch (MXM: use builk connection >>> establishment) >>> >>> ---svn-pre-commit-ignore-below--- >>> >>> r32256 [[BR]] >>> MXM: use builk connection establishment API >>> >>> fixed by Vasily, reviewed by Yossi/Miked >>> >>> cmr=v1.8.2:reviwer=ompi-rm1.8 >>> >>> [rhc] Fixes #4793: Move r32253 to v1.8 branch (configure.ac: use the >>> portable '=') >>> >>> ---svn-pre-commit-ignore-below--- >>> >>> r32253 [[BR]] >>> configure.ac: use the portable '=' operator for the 'test' command >>> >>> Thanks to Kevin M. Buckley for providing the patch >>> >>> cmr=v1.8.2:reviewer=rhc >>> >>> [rhc] Fixes #4791: Move r32245 to v1.8 branch (oshmem: remove automatically >>> generated files) >>> >>> ---svn-pre-commit-ignore-below--- >>> >>> r32245 [[BR]] >>> oshmem: remove automatically generated files from the tarball >>> >>> cmr=v1.8.2:reviewer=miked >>> >>> [rhc] Fixes #4790: Move r32244 to v1.8 branch (mpi: remove automatically >>> generated file) >>> >>> ---svn-pre-commit-ignore-below--- >>> >>> r32244 [[BR]] >>> mpi: remove automatically generated file from the tarball >>> >>> cmr=v1.8.2:reviewer=jsquyres >>> >>> [rhc] Fixes #4789: Move r32243 to v1.8 branch (vt: remove automatically >>> generated files) >>> >>> ---svn-pre-commit-ignore-below--- >>> >>> r32243 [[BR]] >>> vt: remove automatically generated files from the tarball >>> >>> cmr=v1.8.2:reviewer=jurenz >>> >>> [rhc] Fixes #4788: Move r32231 to v1.8 branch (Silence warning) >>> >>> ---svn-pre-commit-ignore-below--- >>> >>> r32231 [[BR]] >>> Silence warning >>> >>> cmr=v1.8.2:reviewer=hjelmn >>> >>> [rhc] Fixes #4786: Move r29732 to v1.8 branch (BUILD: support new automake) >>> >>> ---svn-pre-commit-ignore-below--- >>> >>> r29732 [[BR]] >>> Changes to VT/OTF: >>> Fixed warnings about the need of the 'subdir-objects' option when using >>> Automake v1.14. >>> Due to a bug in Automake (see >>> http://debbugs.gnu.org/cgi/bugreport.cgi?bug=13928) the 'subdir-objects' >>> option cannot be enabled. >>> To get around this problem external sources files are sym linked in the >>> current build directory (as done in ompi/mpi/c/profile) to lead Automake to >>> believe that all source files are in the same directory. >>> >>> ------------------------------------------ >>> [...truncated 10830 lines...] >>> CC prget_f.lo >>> CC pget_accumulate_f.lo >>> CC prget_accumulate_f.lo >>> CC pput_f.lo >>> CC prput_f.lo >>> CC pcompare_and_swap_f.lo >>> CC pfetch_and_op_f.lo >>> CC pwin_allocate_shared_f.lo >>> CC pwin_call_errhandler_f.lo >>> CC pwin_complete_f.lo >>> CC pwin_create_errhandler_f.lo >>> CC pwin_create_f.lo >>> CC pwin_create_keyval_f.lo >>> CC pwin_delete_attr_f.lo >>> CC pwin_fence_f.lo >>> CC pwin_free_f.lo >>> CC pwin_free_keyval_f.lo >>> CC pwin_get_attr_f.lo >>> CC pwin_get_errhandler_f.lo >>> CC pwin_get_group_f.lo >>> CC pwin_get_name_f.lo >>> CC pwin_lock_f.lo >>> CC pwin_post_f.lo >>> CC pwin_set_attr_f.lo >>> CC pwin_set_errhandler_f.lo >>> CC pwin_set_name_f.lo >>> CC pwin_shared_query_f.lo >>> CC pwin_start_f.lo >>> CC pwin_test_f.lo >>> CC pwin_unlock_f.lo >>> CC pwin_wait_f.lo >>> CC pwin_flush_f.lo >>> CC pwin_flush_all_f.lo >>> CC pwin_flush_local_f.lo >>> CC pwin_flush_local_all_f.lo >>> CC pfile_call_errhandler_f.lo >>> CC pfile_close_f.lo >>> CC pfile_create_errhandler_f.lo >>> CC pfile_delete_f.lo >>> CC pfile_get_amode_f.lo >>> CC pfile_get_atomicity_f.lo >>> CC pfile_get_byte_offset_f.lo >>> CC pfile_get_errhandler_f.lo >>> CC pfile_get_group_f.lo >>> CC pfile_get_info_f.lo >>> CC pfile_get_position_f.lo >>> CC pfile_get_position_shared_f.lo >>> CC pfile_get_size_f.lo >>> CC pfile_get_type_extent_f.lo >>> CC pfile_get_view_f.lo >>> CC pfile_iread_at_f.lo >>> CC pfile_iread_f.lo >>> CC pfile_iread_shared_f.lo >>> CC pfile_iwrite_at_f.lo >>> CC pfile_iwrite_f.lo >>> CC pfile_iwrite_shared_f.lo >>> CC pfile_open_f.lo >>> CC pfile_preallocate_f.lo >>> CC pfile_read_all_begin_f.lo >>> CC pfile_read_all_end_f.lo >>> CC pfile_read_all_f.lo >>> CC pfile_read_at_all_begin_f.lo >>> CC pfile_read_at_all_end_f.lo >>> CC pfile_read_at_all_f.lo >>> CC pfile_read_at_f.lo >>> CC pfile_read_f.lo >>> CC pfile_read_ordered_begin_f.lo >>> CC pfile_read_ordered_end_f.lo >>> CC pfile_read_ordered_f.lo >>> CC pfile_read_shared_f.lo >>> CC pfile_seek_f.lo >>> CC pfile_seek_shared_f.lo >>> CC pfile_set_atomicity_f.lo >>> CC pfile_set_errhandler_f.lo >>> CC pfile_set_info_f.lo >>> CC pfile_set_size_f.lo >>> CC pfile_set_view_f.lo >>> CC pfile_sync_f.lo >>> CC pfile_write_all_begin_f.lo >>> CC pfile_write_all_end_f.lo >>> CC pfile_write_all_f.lo >>> CC pfile_write_at_all_begin_f.lo >>> CC pfile_write_at_all_end_f.lo >>> CC pfile_write_at_all_f.lo >>> CC pfile_write_at_f.lo >>> CC pfile_write_f.lo >>> CC pfile_write_ordered_begin_f.lo >>> CC pfile_write_ordered_end_f.lo >>> CC pfile_write_ordered_f.lo >>> CC pfile_write_shared_f.lo >>> CC pregister_datarep_f.lo >>> CCLD libmpi_mpifh_pmpi.la >>> make[3]: Leaving directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/mpi/fortran/mpif-h/profile'> >>> make[3]: Entering directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/mpi/fortran/mpif-h'> >>> CCLD libmpi_mpifh.la >>> make[3]: Leaving directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/mpi/fortran/mpif-h'> >>> make[2]: Leaving directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/mpi/fortran/mpif-h'> >>> Making all in mpi/fortran/use-mpi-tkr >>> make[2]: Entering directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/mpi/fortran/use-mpi-tkr'> >>> PPFC mpi.lo >>> FCLD libmpi_usempi.la >>> make[2]: Leaving directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/mpi/fortran/use-mpi-tkr'> >>> Making all in mpi/fortran/mpiext >>> make[2]: Entering directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/mpi/fortran/mpiext'> >>> make[2]: Nothing to be done for `all'. >>> make[2]: Leaving directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/mpi/fortran/mpiext'> >>> Making all in contrib/vt >>> make[2]: Entering directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt'> >>> Making all in vt >>> make[3]: Entering directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt'> >>> /usr/bin/make all-recursive >>> make[4]: Entering directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt'> >>> Making all in extlib >>> make[5]: Entering directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib'> >>> Making all in otf >>> make[6]: Entering directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf'> >>> /usr/bin/make all-recursive >>> make[7]: Entering directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf'> >>> Making all in vendor/jenkins_hash >>> make[8]: Entering directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/vendor/jenkins_hash'> >>> CC libjenkins_hash_la-jenkins_hash.lo >>> CCLD libjenkins_hash.la >>> make[8]: Leaving directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/vendor/jenkins_hash'> >>> Making all in otflib >>> make[8]: Entering directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/otflib'> >>> CC libopen_trace_format_la-OTF_CopyHandler.lo >>> CC libopen_trace_format_la-OTF_CopyHandler_stream.lo >>> CC libopen_trace_format_la-OTF_File.lo >>> CC libopen_trace_format_la-OTF_File_iofsl.lo >>> CC libopen_trace_format_la-OTF_FileManager.lo >>> CC libopen_trace_format_la-OTF_Filenames.lo >>> CC libopen_trace_format_la-OTF_HandlerArray.lo >>> CC libopen_trace_format_la-OTF_KeyValue.lo >>> CC libopen_trace_format_la-OTF_MasterControl.lo >>> CC libopen_trace_format_la-OTF_Parse.lo >>> CC libopen_trace_format_la-OTF_RBuffer.lo >>> CC libopen_trace_format_la-OTF_Reader.lo >>> CC libopen_trace_format_la-OTF_RStream.lo >>> CC libopen_trace_format_la-OTF_WBuffer.lo >>> CC libopen_trace_format_la-OTF_Writer.lo >>> CC libopen_trace_format_la-OTF_WStream.lo >>> CC libopen_trace_format_la-OTF_inttypes.lo >>> CCLD libopen-trace-format.la >>> make[8]: Leaving directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/otflib'> >>> Making all in otfauxlib >>> make[8]: Entering directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/otfauxlib'> >>> CC libotfaux_la-OTFAUX_MsgMatching.lo >>> CC libotfaux_la-OTFAUX_Thumbnail.lo >>> CC libotfaux_la-OTFAUX_Process.lo >>> CC libotfaux_la-OTFAUX_State.lo >>> CCLD libotfaux.la >>> make[8]: Leaving directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/otfauxlib'> >>> Making all in tools >>> make[8]: Entering directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/tools'> >>> Making all in otfaux >>> make[9]: Entering directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/tools/otfaux'> >>> CXX otfaux.o >>> CXX Control.o >>> CXX Handler.o >>> CXX Stats.o >>> CXXLD otfaux >>> make[9]: Leaving directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/tools/otfaux'> >>> Making all in otfconfig >>> make[9]: Entering directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/tools/otfconfig'> >>> CC otfconfig.o >>> CCLD otfconfig >>> make[9]: Leaving directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/tools/otfconfig'> >>> Making all in otfdump >>> make[9]: Entering directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/tools/otfdump'> >>> CXX Handler.o >>> CXX otfdump.o >>> CXXLD otfprint >>> make[9]: Leaving directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/tools/otfdump'> >>> Making all in otfinfo >>> make[9]: Entering directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/tools/otfinfo'> >>> CC handler.o >>> CC hash.o >>> CC otfinfo.o >>> CCLD otfinfo >>> make[9]: Leaving directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/tools/otfinfo'> >>> Making all in otfmerge >>> make[9]: Entering directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/tools/otfmerge'> >>> Making all in . >>> make[10]: Entering directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/tools/otfmerge'> >>> CC otfmerge-handler.o >>> CC otfmerge-otfmerge.o >>> CCLD otfmerge >>> make[10]: Leaving directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/tools/otfmerge'> >>> Making all in mpi >>> make[10]: Entering directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/tools/otfmerge/mpi'> >>> ln -s ../../../tools/otfmerge/handler.c handler.c >>> ln -s ../../../tools/otfmerge/otfmerge.c otfmerge.c >>> CC otfmerge_mpi-handler.o >>> CC otfmerge_mpi-otfmerge.o >>> CCLD otfmerge-mpi >>> make[10]: Leaving directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/tools/otfmerge/mpi'> >>> make[9]: Leaving directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/tools/otfmerge'> >>> Making all in otfprofile >>> make[9]: Entering directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/tools/otfprofile'> >>> Making all in . >>> make[10]: Entering directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/tools/otfprofile'> >>> CXX otfprofile-clustering.o >>> CXX otfprofile-collect_data.o >>> CXX otfprofile-collect_dispersion.o >>> CXX otfprofile-comparison_clinkage.o >>> CXX otfprofile-comparison_kmeans.o >>> CXX otfprofile-create_csv.o >>> CXX otfprofile-create_marker.o >>> CXX otfprofile-create_latex.o >>> CXX otfprofile-create_filter.o >>> CXX otfprofile-otfprofile.o >>> CXX otfprofile-process_dispersion.o >>> CXX otfprofile-summarize_data.o >>> CXXLD otfprofile >>> make[10]: Leaving directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/tools/otfprofile'> >>> Making all in mpi >>> make[10]: Entering directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/tools/otfprofile/mpi'> >>> make[10]: Leaving directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/tools/otfprofile/mpi'> >>> make[10]: *** No rule to make target `../reduce_data.cpp', needed by >>> `otfprofile_mpi-reduce_data.o'. Stop. >>> make[9]: *** [all-recursive] Error 1 >>> make[9]: Leaving directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/tools/otfprofile'> >>> make[8]: *** [all-recursive] Error 1 >>> make[8]: Leaving directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf/tools'> >>> make[7]: Leaving directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf'> >>> make[7]: *** [all-recursive] Error 1 >>> make[6]: *** [all] Error 2 >>> make[6]: Leaving directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib/otf'> >>> make[5]: *** [all-recursive] Error 1 >>> make[5]: Leaving directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt/extlib'> >>> make[4]: *** [all-recursive] Error 1 >>> make[4]: Leaving directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt'> >>> make[3]: *** [all] Error 2 >>> make[3]: Leaving directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt/vt'> >>> make[2]: *** [all-recursive] Error 1 >>> make[2]: Leaving directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi/contrib/vt'> >>> make[1]: *** [all-recursive] Error 1 >>> make[1]: Leaving directory >>> `<https://savbu-usnic.cisco.com/jenkins/job/ompi_upstream_v1.8_build_debug/ws/ompi'> >>> make: *** [all-recursive] Error 1 >>> srun: error: mpi001: task 0: Exited with exit code 2 >>> +/home/dgoodell/git/savbu-usnic-cluster/jenkins/jenkins-build-ompi.zsh:36> >>> check_status >>> +check_status:1> eval return 2 >>> +(eval):1> return 2 >>> salloc: Relinquishing job allocation 824885 >>> +/home/dgoodell/git/savbu-usnic-cluster/jenkins/jenkins-submit.zsh:59> >>> salloc_status=2 >>> +/home/dgoodell/git/savbu-usnic-cluster/jenkins/jenkins-submit.zsh:61> grep >>> 'salloc: error: Failed to allocate resources: More processors requested >>> than permitted' salloc_err.out >>> +/home/dgoodell/git/savbu-usnic-cluster/jenkins/jenkins-submit.zsh:65> rm >>> -f salloc_err.out >>> +/home/dgoodell/git/savbu-usnic-cluster/jenkins/jenkins-submit.zsh:66> >>> return 2 >>> Build step 'Execute shell' marked build as failure >>> Archiving artifacts >> >> _______________________________________________ >> devel mailing list >> de...@open-mpi.org >> Subscription: http://www.open-mpi.org/mailman/listinfo.cgi/devel >> Link to this post: >> http://www.open-mpi.org/community/lists/devel/2014/07/15210.php > > _______________________________________________ > devel mailing list > de...@open-mpi.org > Subscription: http://www.open-mpi.org/mailman/listinfo.cgi/devel > Link to this post: > http://www.open-mpi.org/community/lists/devel/2014/07/15211.php
