>From some (soon-to-be-released) docs by Kalle Jokiniemi # Enable VDD echo 1 > /sys/devices/platform/reg-userspace-consumer.0/state # Disable VDD echo 0 > /sys/devices/platform/reg-userspace-consumer.0/state
David On 23/12/13 14:49, Kimmo Lindholm wrote: > Anchors aweigh! > > Just hooked up scope to I2C bus on pogo pins, and there is life! > > Can someone point me in correct direction to enable 3.3V pin? > > 3.3V seems to be active just for a while when I press the cover detector > switch > and after eeprom in address 0x50 is tested 3.3V is gone. > > > > Best Regards, > ----------------- --... ...-- -.. . --- .... ..--- .... --.- .--. > ---------------- > > *Kimmo Lindholm * > *Hardware and Platform Development Manager* > > EKE-Electronics Ltd. > Piispanportti7, FI-02240 Espoo, Finland > Tel. +358 9 6130 3305, fax +358 96130 3300, mobile +358 40 500 0081 > kimmo.lindh...@eke.fi www.eke.com <http://www.eke.com> > > This email and any files transmitted with it are confidential and intended > solely for the use of the individual or entity to whom they are addressed. > > > > > > > _______________________________________________ > SailfishOS.org Devel mailing list > _______________________________________________ SailfishOS.org Devel mailing list