Hi, I tried the patch Thomas mentioned, it works great! Much faster. I only wonder how you get this: wrote 32768 bytes from file hello-world.hex in 5.071708s (6.310 KiB/s) │ verified 16600 bytes in 1.374114s (11.797 KiB/s) I mean, how do you print those values?
Cheers, 2015-01-27 14:54 GMT+01:00 Thomas Eichinger <thomas.eichin...@fu-berlin.de>: > HI again, > > with this patch [1] time needed to flash the samr21 gets divided > by factor 3. (numbers below) For someone doing it very often this > could be very interesting. It is still worked on but I tested it > without error for now. > Please provide feedback if you use this, as openocd guys are desperately > looking for EDBG testers. > > Best, Thomas > > with patch: > wrote 32768 bytes from file hello-world.hex in 5.071708s (6.310 KiB/s) > │ > verified 16600 bytes in 1.374114s (11.797 KiB/s) > > without patch > wrote 32768 bytes from file hello-world.hex in 16.532793s (1.936 KiB/s) > verified 16600 bytes in 1.432996s (11.313 KiB/s) > > [1] http://openocd.zylin.com/#/c/2356/ > > > On 27 Jan 2015, at 13:48, Thomas Eichinger < > thomas.eichin...@fu-berlin.de> wrote: > > > > Hi again, > > > > after some research I found this post [1] on the openocd mailing list > > explaining why flashing the samr21-xpro is unbearably slow. > > > > tl;dr > > The openocd cmsis-dap driver operates in synchronous operation > > and is not ported to a new asynchronous API yet. > > Fingers crossed they port it soon. > > > > Best, Thomas > > > > [1] http://sourceforge.net/p/openocd/mailman/message/32496519/ > > > >> On 14 Jan 2015, at 15:46, Lucas Jenß <li...@x3ro.de> wrote: > >> > >> Hi again, > >> > >> so it seems that the slowness was caused by virtualization after all. > My previous VM was an Ubuntu 13.10 running inside an older version of > VMware Fusion, which resulted in the ~0.5KiB/s speed. After installing an > Ubuntu 14.10 that went up to ~1.5KiB/s and running OpenOCD directly on the > host gets me close to 2KiB/s when flashing. > >> > >> On OS X 10.9: > >> > >> wrote 32768 bytes from file hello-world.hex in 16.164614s (1.980 KiB/s) > >> verified 16892 bytes in 1.463347s (11.273 KiB/s) > >> > >> On Ubuntu 14.10: > >> > >> wrote 32768 bytes from file > /home/lucas/RIOT/examples/hello-world/bin/samr21-xpro/hello-world.hex in > 22.042933s (1.452 KiB/s) > >> verified 16892 bytes in 1.505869s (10.955 KiB/s) > >> > >> Cheers, > >> Lucas > >> > >> On 13 Jan 2015, at 11:18, Martin <martin.landsm...@haw-hamburg.de> > wrote: > >> > >>> Hi, > >>> > >>> my flashing speed is roughly equal to Thomas' for the Samr21-xpro: > >>> > >>> ``` > >>> wrote 65536 bytes from file RIOT/tests/pnet/bin/samr21-xpro/pnet.hex > in 32.083557s (1.995 KiB/s) > >>> verified 49688 bytes in 4.114729s (11.793 KiB/s) > >>> ``` > >>> > >>> My openocd version: > >>> `Open On-Chip Debugger 0.9.0-dev-00186-g30203b3 (2014-11-12-11:49)` > >>> > >>> Best regards, > >>> Martin > >>> On 12.01.2015 21:07, Baptiste Clenet wrote: > >>>> Flashing is slow for us too, how do you get the speed? > >>>> > >>>> 2015-01-12 11:13 GMT+01:00 Lucas Jenß <li...@x3ro.de>: > >>>> Hi Thomas, > >>>> > >>>> verification was much faster as 0.4KiB/s, I think around 10 or so for > me. > >>>> I checked out OpenOCD on the 9th. I’m also running Linux inside VMware > >>>> though, so maybe it’s just caused by the virtualization. I’ll see how > fast > >>>> it is on the host. > >>>> > >>>> Cheers, > >>>> Lucas > >>>> > >>>> A couple of days ago. > >>>> > >>>> On 12 Jan 2015, at 11:00, Thomas Eichinger < > thomas.eichin...@fu-berlin.de> wrote: > >>>> > >>>>> Hi Lucas, > >>>>> > >>>>> I was playing with the openocd configuration a bit, mainly > >>>>> `adapter_speed`, back when support for this was added without > >>>>> any significant outcome. > >>>>> Problem is, the EDBG chip, on the bottom of the board, handling > >>>>> communication with the MCU is specified to run on 1MHz and the > >>>>> openocd docs mention, for CMSIS-DAP, it is not advised to let > >>>>> signal frequency exceed half of the operating frequency. > >>>>> (I’d guess Nyquist-Shannon applies) > >>>>> > >>>>> That said, 0.481KiB/s still seems slow for this. I’m at least > >>>>> reaching 1.787KiB/s for flashing and 11.190KiB/s for verification. > >>>>> When did you check out the OpenOCD code? > >>>>> > >>>>> Best, Thomas > >>>>> > >>>>>> On 10 Jan 2015, at 14:25, Lucas Jenß <li...@x3ro.de> wrote: > >>>>>> > >>>>>> Hey everyone, > >>>>>> > >>>>>> I’ve been playing around with the Samr21 xpro and flashing > >>>>>> the device is _really_ slow, i.e. 0.481 KiB/s. Is this expected > >>>>>> or is there a way to improve it? I’m using the current OpenOCD > >>>>>> Git HEAD because the 0.8.0 release does not seem to contain the > >>>>>> configs for the board yet. I tried to flash the hello-world > >>>>>> example. > >>>>>> > >>>>>> Cheers, > >>>>>> Lucas > >>>>>> _______________________________________________ > >>>>>> devel mailing list > >>>>>> devel@riot-os.org > >>>>>> http://lists.riot-os.org/mailman/listinfo/devel > >>>>> > >>>>> _______________________________________________ > >>>>> devel mailing list > >>>>> devel@riot-os.org > >>>>> http://lists.riot-os.org/mailman/listinfo/devel > >>>>> > >>>> > >>>> _______________________________________________ > >>>> devel mailing list > >>>> devel@riot-os.org > >>>> http://lists.riot-os.org/mailman/listinfo/devel > >>>> > >>>> > >>>> > >>>> -- > >>>> Clenet Baptiste > >>>> FR: +33 6 29 73 05 39 > >>>> Élève-Ingénieur ESEO Angers, dernière année, spécialisation: > Architecte système temps réél embarqué > >>>> Bidiplôme Master Robotics à l'Université de Plymouth en 2013-2014 > >>>> > >>>> > >>>> > >>>> _______________________________________________ > >>>> devel mailing list > >>>> > >>>> devel@riot-os.org > >>>> http://lists.riot-os.org/mailman/listinfo/devel > >>> > >>> _______________________________________________ > >>> devel mailing list > >>> devel@riot-os.org > >>> http://lists.riot-os.org/mailman/listinfo/devel > >> > >> _______________________________________________ > >> devel mailing list > >> devel@riot-os.org > >> http://lists.riot-os.org/mailman/listinfo/devel > > > > _______________________________________________ > > devel mailing list > > devel@riot-os.org > > http://lists.riot-os.org/mailman/listinfo/devel > > _______________________________________________ > devel mailing list > devel@riot-os.org > http://lists.riot-os.org/mailman/listinfo/devel > -- *Clenet Baptiste*
_______________________________________________ devel mailing list devel@riot-os.org http://lists.riot-os.org/mailman/listinfo/devel