Did i do anything wrong with my .ini file?
Sent with ProtonMail Secure Email. ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ On Wednesday, March 31, 2021 12:20 AM, zack_on_the_speed_chanel <zack_on_the_speed_cha...@protonmail.ch> wrote: > my waf file look like this > > $cat config.ini > [sparc/leon3] > BUILD_TESTS=True > > for rebuilding the bsp I ran: > ./waf configure > ./waf > > Zack > Sent with ProtonMail Secure Email. > > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ > On Tuesday, March 30, 2021 9:02 PM, Gedare Bloom ged...@rtems.org wrote: > > > On Tue, Mar 30, 2021 at 2:41 PM zack_on_the_speed_chanel > > zack_on_the_speed_cha...@protonmail.ch wrote: > > > > > I have both of the options and i tried to built it with BUILD_TESTS and > > > PSXTESTS and the test didn't build. Is there anything else that could > > > alter how rtems is built? > > > > After you set them to True, did you re-run waf configure before waf build? > > > > > Sent with ProtonMail Secure Email. > > > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ > > > On Tuesday, March 30, 2021 3:29 PM, Gedare Bloom ged...@rtems.org wrote: > > > > > > > BUILD_TESTS and BUILD_PSXTESTS are two options that > > > > if either is True it should build psxclock02. > > > > On Tue, Mar 30, 2021 at 9:20 AM zack_on_the_speed_chanel > > > > zack_on_the_speed_cha...@protonmail.ch wrote: > > > > > > > > > I did build the leon3 bsp and I still don't see the psxtimer02 as an > > > > > executable. Is there a way build a test from source? I have the > > > > > sources for psxtest02. Also i'm thinking that it could be due to the > > > > > fact that i don't have posix tests enabled. Is there a way > > > > > that to enable posix? > > > > > Thanks > > > > > Zack > > > > > Sent with ProtonMail Secure Email. > > > > > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ > > > > > On Monday, March 29, 2021 8:11 PM, zack_on_the_speed_chanel > > > > > zack_on_the_speed_cha...@protonmail.ch wrote: > > > > > > > > > > > Sorry that assumption was very native of me that i didn't have a > > > > > > working baseline. Joel said that the erc32 was similar to the leon > > > > > > bsp > > > > > > " > > > > > > The ERC32 what's the first space hardened sparc processor. The > > > > > > leon3 is a > > > > > > later processor in the same family. Both use the same build of GCC > > > > > > and are > > > > > > just different bsps. In fact both run on the same sis simulator. " > > > > > > I also though that the bsps were the same and I can work on the > > > > > > issue with only the erc32 BSP. I have one more question: when i run > > > > > > the hello world test. All the test files are within one specific > > > > > > directory and I don't see the executables for specific bsps that's > > > > > > why i thought all tests would be built (there would not be any > > > > > > specific considerations for bsps) . > > > > > > Sent with ProtonMail Secure Email. > > > > > > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ > > > > > > On Monday, March 29, 2021 2:45 PM, Gedare Bloom ged...@rtems.org > > > > > > wrote: > > > > > > > > > > > > > On Sun, Mar 28, 2021 at 1:26 PM zack_on_the_speed_chanel > > > > > > > zack_on_the_speed_cha...@protonmail.ch wrote: > > > > > > > > > > > > > > > Hello all, > > > > > > > > I'm updating on what' i've found out with the issue (forgot to > > > > > > > > reply all) . Joel recommended me check the coverage for the > > > > > > > > leon BSP( to check if it's supported) and i found that the > > > > > > > > branch with CLOCK_MONOTONIC was not reached I think now that > > > > > > > > it's supported (because the annotated assembly is in the sparc > > > > > > > > instruction set). I also found out that the test would be > > > > > > > > similar to Psxclock02 and it runs the same tests on a different > > > > > > > > clock. Then I tried to build the psxclock02 test , change the > > > > > > > > create_clock to have the clock_monotonic argument and i didn't > > > > > > > > see the executable or any change in the ./waf build. Then I was > > > > > > > > suggested that you have to enable all tests some how? How do i > > > > > > > > enable all tests? > > > > > > > > > > > > > > Do you use something like: ./waf bsp_defaults ---rtems-bsp=leon3 > > > > > > > > config.ini > > > > > > > Then, take a look, BUILD_TESTS and BUILD_PSXTESTS are two options > > > > > > > that > > > > > > > if either is True it should build psxclock02. > > > > > > > When you write code, you should first make sure you can build the > > > > > > > code > > > > > > > as it exists if it is supposed to work, and run it to see that it > > > > > > > works. Then you should make changes from a working baseline. > > > > > > > Otherwise > > > > > > > when you get a problem, how do you know if the problem is your > > > > > > > problem, or it already existed? > > > > > > > > > > > > > > > Thanks > > > > > > > > Zack > > > > > > > > devel mailing list > > > > > > > > devel@rtems.org > > > > > > > > http://lists.rtems.org/mailman/listinfo/devel _______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel