On Fri, Apr 2, 2021 at 12:19 PM zack_on_the_speed_chanel <zack_on_the_speed_cha...@protonmail.ch> wrote: > > Yes the build works successfully. I tried to also just try BUILD_PSXTESTS > only and it failed midway. I also tried to do an automated build. It failed > with __start symbol not found. > > You also need to enable the POSIX API/signals, in your config.ini add RTEMS_POSIX_API = True
> Sent with ProtonMail Secure Email. > > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ > On Thursday, April 1, 2021 10:10 PM, Gedare Bloom <ged...@rtems.org> wrote: > > > On Thu, Apr 1, 2021 at 2:52 PM zack_on_the_speed_chanel > > zack_on_the_speed_cha...@protonmail.ch wrote: > > > > > Did i do anything wrong with my .ini file? > > > Sent with ProtonMail Secure Email. > > > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ > > > On Wednesday, March 31, 2021 12:20 AM, zack_on_the_speed_chanel > > > zack_on_the_speed_cha...@protonmail.ch wrote: > > > > > > > my waf file look like this > > > > $cat config.ini > > > > [sparc/leon3] > > > > BUILD_TESTS=True > > > > for rebuilding the bsp I ran: > > > > ./waf configure > > > > ./waf > > > > This looks right, nothing obvious to me. > > > > Does the waf build finish successfully, or does it stop with an error? > > > > > > Zack > > > > Sent with ProtonMail Secure Email. > > > > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ > > > > On Tuesday, March 30, 2021 9:02 PM, Gedare Bloom ged...@rtems.org wrote: > > > > > > > > > On Tue, Mar 30, 2021 at 2:41 PM zack_on_the_speed_chanel > > > > > zack_on_the_speed_cha...@protonmail.ch wrote: > > > > > > > > > > > I have both of the options and i tried to built it with BUILD_TESTS > > > > > > and PSXTESTS and the test didn't build. Is there anything else that > > > > > > could alter how rtems is built? > > > > > > > > > > After you set them to True, did you re-run waf configure before waf > > > > > build? > > > > > > > > > > > Sent with ProtonMail Secure Email. > > > > > > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ > > > > > > On Tuesday, March 30, 2021 3:29 PM, Gedare Bloom ged...@rtems.org > > > > > > wrote: > > > > > > > > > > > > > BUILD_TESTS and BUILD_PSXTESTS are two options that > > > > > > > if either is True it should build psxclock02. > > > > > > > On Tue, Mar 30, 2021 at 9:20 AM zack_on_the_speed_chanel > > > > > > > zack_on_the_speed_cha...@protonmail.ch wrote: > > > > > > > > > > > > > > > I did build the leon3 bsp and I still don't see the psxtimer02 > > > > > > > > as an executable. Is there a way build a test from source? I > > > > > > > > have the sources for psxtest02. Also i'm thinking that it could > > > > > > > > be due to the fact that i don't have posix tests enabled. Is > > > > > > > > there a way > > > > > > > > that to enable posix? > > > > > > > > Thanks > > > > > > > > Zack > > > > > > > > Sent with ProtonMail Secure Email. > > > > > > > > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ > > > > > > > > On Monday, March 29, 2021 8:11 PM, zack_on_the_speed_chanel > > > > > > > > zack_on_the_speed_cha...@protonmail.ch wrote: > > > > > > > > > > > > > > > > > Sorry that assumption was very native of me that i didn't > > > > > > > > > have a working baseline. Joel said that the erc32 was similar > > > > > > > > > to the leon bsp > > > > > > > > > " > > > > > > > > > The ERC32 what's the first space hardened sparc processor. > > > > > > > > > The leon3 is a > > > > > > > > > later processor in the same family. Both use the same build > > > > > > > > > of GCC and are > > > > > > > > > just different bsps. In fact both run on the same sis > > > > > > > > > simulator. " > > > > > > > > > I also though that the bsps were the same and I can work on > > > > > > > > > the issue with only the erc32 BSP. I have one more question: > > > > > > > > > when i run the hello world test. All the test files are > > > > > > > > > within one specific directory and I don't see the executables > > > > > > > > > for specific bsps that's why i thought all tests would be > > > > > > > > > built (there would not be any specific considerations for > > > > > > > > > bsps) . > > > > > > > > > Sent with ProtonMail Secure Email. > > > > > > > > > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ > > > > > > > > > On Monday, March 29, 2021 2:45 PM, Gedare Bloom > > > > > > > > > ged...@rtems.org wrote: > > > > > > > > > > > > > > > > > > > On Sun, Mar 28, 2021 at 1:26 PM zack_on_the_speed_chanel > > > > > > > > > > zack_on_the_speed_cha...@protonmail.ch wrote: > > > > > > > > > > > > > > > > > > > > > Hello all, > > > > > > > > > > > I'm updating on what' i've found out with the issue > > > > > > > > > > > (forgot to reply all) . Joel recommended me check the > > > > > > > > > > > coverage for the leon BSP( to check if it's supported) > > > > > > > > > > > and i found that the branch with CLOCK_MONOTONIC was not > > > > > > > > > > > reached I think now that it's supported (because the > > > > > > > > > > > annotated assembly is in the sparc instruction set). I > > > > > > > > > > > also found out that the test would be similar to > > > > > > > > > > > Psxclock02 and it runs the same tests on a different > > > > > > > > > > > clock. Then I tried to build the psxclock02 test , change > > > > > > > > > > > the create_clock to have the clock_monotonic argument and > > > > > > > > > > > i didn't see the executable or any change in the ./waf > > > > > > > > > > > build. Then I was suggested that you have to enable all > > > > > > > > > > > tests some how? How do i enable all tests? > > > > > > > > > > > > > > > > > > > > Do you use something like: ./waf bsp_defaults > > > > > > > > > > ---rtems-bsp=leon3 > config.ini > > > > > > > > > > Then, take a look, BUILD_TESTS and BUILD_PSXTESTS are two > > > > > > > > > > options that > > > > > > > > > > if either is True it should build psxclock02. > > > > > > > > > > When you write code, you should first make sure you can > > > > > > > > > > build the code > > > > > > > > > > as it exists if it is supposed to work, and run it to see > > > > > > > > > > that it > > > > > > > > > > works. Then you should make changes from a working > > > > > > > > > > baseline. Otherwise > > > > > > > > > > when you get a problem, how do you know if the problem is > > > > > > > > > > your > > > > > > > > > > problem, or it already existed? > > > > > > > > > > > > > > > > > > > > > Thanks > > > > > > > > > > > Zack > > > > > > > > > > > devel mailing list > > > > > > > > > > > devel@rtems.org > > > > > > > > > > > http://lists.rtems.org/mailman/listinfo/devel > > _______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel
